Industrial Pump Dealers in Jodhpur

ARC METAL SPRAY SYSTEM It Consists Of : ARC SPRAY GUN MODEL IMC-95 : This Metal Spray System does not require gases like Oxygen, Acetylene/LPG. It require electrical power and compressed air for metal spray. The metal spray production will be high at lower operating and maintenance cost. The Deposited Coating is more dense and fine. The Power Source : It is a DC current rectifier working on a 3-Phase, 380/415/440V, 50/60 Hertz power supply providing a voltage between 18 to 50 volts. The Control Unit : It is normally mounted above the power source and carries the regulators and pressure gauges for the air supply to the spraying gun. One remote control is for stop the operation by operator is attached with control unit by cable. The Twin Wire Spool Stand : The two wires for the two electrodes for the arc are supplied from two insulated wire spools mounted on a stand. Gun Stand : It is for mounting and positioning of Gun in any direction.

In the Arc Spray Process pair of electrically conductive wires are melted by means of an electric arc. The molten material is atomised by compressed air and propelled towards the substrate surface. The impacting molten particles on the substrate rapidly solidify to form a coating. Electric arc spray coatings are normally denser and stronger than their equivalent combustion spray coatings. Low running costs, high spray rates and efficiency make it a good tool for spraying large areas and high production rates. Electric arc spray systems are offered that feed wire by either an air or electrical motor. Electric arc spraying has the advantage of not requiring the use of oxygen and/or a combustible gas.

• Type: DC Water Pump
• Brand Name: SHAKTI
• Power Source: Solar
• Motor Phase: Single Phase
• Type Of End Use: Agricultural
• Voltage: 280V
• Frequency: 50Hz
• Material: Cast Iron
• Pressure: 5 Bar
• Water Discharge Capacity: 300 Litre/min
• Engine: 7.5 HP
• Automation Grade: Semi-Automatic

• Application: Water
• Certification: CE Certified
• Weight: 10-20kg
• Power: 10hp, 7hp
• Driven Type: Electric
• Warranty: 1year
• Brand Name: Shakti

We are supplier of this Product

• Power: Solar water pump no need
• Pressure: Low Pressure
• Structure: Piston Pump
• Feature: Hot proof solar water pump
• Water pump with handle: Fits most bottles
• Warranty: 1 Year

• Type: Arc Spray Equipment
• Color: Brown
• Voltage: 380V
• Driven Type: Electric, Hydraulic
• Warranty: 1year
• Automatic Type: Manual

electric arc spraying is a thermal spraying process that uses an electric arc between two consumable electrodes of the surfacing materials as the heat source. A compressed gas atomizes and propels the molten material to the workpiece. The principle of this process is shown by figure. The two consumable electrode wires are fed by a wire feeder to bring them together at an angle of approximately 30 degrees and to maintain an arc between them. A compressed air jet is located behind and directly in line with the intersecting wires. The wires melt in the arc and the jet of air atomizes the melted metal and propels the fine molten particles to the workpiece. The power source for producing the arc is a direct-current constant-voltage welding machine. The wire feeder is similar to that used for gas metal arc welding except that it feeds two wires. The gun can be hand held or mounted in a holding and movement mechanism. The part or the gun is moved with respect to the other to provide a coating surface on the part. the high temperature of the arc melts the electrode wire faster and deposits particles having higher heat content and greater fluidity than the flame spraying process. The deposition rates are from 3 to 5 times greater and the bond strength is greater 5000-7000 psi. There is coalescence in addition to the mechanical bond. The deposit is denser and coating strength is greater than when using flame spraying. dry compressed air is used for atomizing and propelling the molten metal. A pressure of 80 psi and from 30 to 80 cu ft/min (0.85 to 2.27 cu m/min) is used. Almost any metal that can be drawn into a wire can be sprayed. Following are metals that are arc sprayed: aluminum, babbitt, brass, bronze, copper, molybdenum, monel, nickel, stainless steel, carbon steel, tin, and zinc.

We are offering brass impeller.

Our Rotary Gear Pumps are non corrosive, and have sturdy construction and high efficiency. Our range of Rotary Gear Pumps features sleeve on shaft that makes the maintenance economical and easy. Also, these Rotary Gear Pumps have modified tooth profile that enhances the tooth life. These Rotary Gear Pumps also features DU bush bearings, and have herringbone rotors design that eliminates side thrust.   Features : Non-corrosive Low-leakage path Sturdy construction Perfect design Sleeve on shaft make maintenance economical and easy Highly durable Efficient Modified tooth profile enhances the tooth life DU bush bearings Herringbone rotors design eliminates side thrust

• Brand Name: Nov
• Standard or Nonstandard: Standard
• Model Number: DSC02417
• Supply Ability: 100000 Piece/Pieces per Week
• Packaging Details: Export Packing (as per requirement / instructions)
• Port: ALL PORTS OF INDIA

We are offering SS Submersible Pump. The pump body is made with anti corrosive material with high wear resistance resulting in reduction in running costs and higher pumping efficiency. The Submersible Pump can work continuously for a longer period of time without any trouble. Higher reliability and best results even under harsh conditions make Submersible Pump acceptable to users.The areas were the submersible pumps are used irrigation and other agricultural applications pressure boosting in high-rise buildings municipal and industrial water supply residential water supply from deep wells fire-fighting systems dewatering & mining Our pumps have the following features advanced technology throughout wide range of pumps for various applications long life low weight 100 % fabricated stainless steel pumps water hammer protection resistance to aggressive water optimal hydraulics provide high efficiency and operating costs crafted to excel in state-of-the-art production facilities and high skilled manpower model nos: V4 model are BSP-3A, BSP-5A, BSP-8A. V6 model are BSP-10, BSP-17, BSP-18, BSP-30, BSP-46, BSP-60 V8 model are BSP-77 and BSP-95 V10 model is BSP-125.  

• Material: Stainless Steel
• Corrosion Resistance: Yes
• Hardness: 58-62 HRC
• Collar Length: 57 mm
• Weight: 310 gm
• Tensile Strength: 300-400 Mpa

LAXMI, Full Open Wing Guided type is a single piece, solid body valve ensuring strength and rigidity to withstand high pressure in pumping operation. While in operation, the fully-open design of the valve with hardened wear area provides maximum fluid discharge & maximum wear life at high pressures. Snap on ring and top plate provides easy access to insert and prevents plate breakage.

• Warranty: 1 Year
• Color: BLACK
• Weight: 3.6 kg
• Coating: THERMAL SPRAY
• After-sales Service Provided: Overseas third-party support available
• Port: ANY PORT
• Supply Ability: 200 Piece/Pieces per Month
• Lead Time: 1 DAY
• Condition: New

• Material: Stainless Steel
• Usage/Application: Industrial
• Power Source: Pneumatic

Water pump bearings incorporate a spherical outer ring raceway, with the center of the radius located on the bearing axis, providing a self-alignment capability. This bearing incorporates a 45° contact angle that enables the bearing to support large axial loads and moderate radial loads. These bearings incorporate an improved internal design that allows relatively high-speed operation. Typical applications: injection molding machines, crane hooks, vertical pumps.

In the Arc Spray process, the raw material in the form of a pair of metallic wires is melted by means of an electric arc. The molten material is atomised by compressed air and propelled towards the workpiece. This gun is the result of our extrenuous R&D Activities which we continually endeavor upon.   The combination of the proven, rugged drive mechanism with the high volume air flow capability, together with a new improved nozzle design, truly makes this gun a state-of-the-art arc spray gun. DC Servo Motor Wire Drive. Simplified maintenance. Quick Disconnect Wire Conduits. Integrated Arc Jets.

deutz fahr tractor hydraulic valve

We introduce ourselves as well known and established manufacturers and exporters of hydraulic lift pumps for various tractor models.

Air Compressor Pumps

borewell foundation pipes, borewell machines, borewell pipes

Oil Pump Assembly, hydraulic pump assembly

hydraulic lift pump, Steering Parts, Brake Parts, Transmission Parts

We are offering nozzle element, dv gear pump, tractor parts. we deal with original spare parts for diesel and gas engine cummins, deutz, kubota, perkins e volvo and not original parts ( but with good quality ) for diesel engine caterpillar rajdhani diesel parts manufachured & traders all taype tractors & moter parts ! nozzle,element, d.v. E.t.c company overview rajdhani diesel parts trader & manufactured description all taype nozzle eliment d.v. Gear pump and tractors parts e.t.c available

tractor hydraulic lift pump, Tractor Clutch Parts, Tractor Engine Parts

tractor hydraulic lift pump, Tractor Hydraulic Lift Cylinder

High Pressure Pumps, inline pumps, Vertical Multistage Pumps