Synco Industries Limited Heavy Industrial Area, Jodhpur, Rajasthan

Color : Pearl White

Packaging Size : 25Kgs

Packaging Type : Jumbo Bags

Color : White

pH Value : 9 +- 0.5

Application : Agriculture

The abrasive particles are suspended in liquid, generally water, and pumped to the nozzle in slurry form. The compressed air stream is supplied in the nozzle to increase the velocity and positive pressure when it comes in contact with abrasive slurry. The pressure pump is made up of wear resistant material. Use of wet blaster is recommended for surface finishing operations and light mark.   It is also useful in cleaning, deburing holes and precision cutting tools which are inaccessible by any other method. With use of fine abrasive, a surface can be super finished with wet blasting.

Restrictive environmental legislation and a greater awareness of health hazards were the main reasons for development of vacuum blasting equipment. The advantages of the equipment are not limited to preventing environmental and health problems, in many applications it is also a fully justified method of surface preparation on an economic basis.   Disposal costs of hazardous waste is minimal by the use of recyclable abrasives, so the amount of abrasives used is much lower than compared with open-blasting. The equipment has many applications. Besides for construction and maintenance of ships, the equipment can also be used for the maintenance of bridges, machinery, power plants or for the renovation of concrete. The machine therefore is commonly found in steel, shipbuilding, offshore and petro-chemical industries apart from other places.

Deposition of foreign material on tyre mold during tyre molding processing is inherent and perpetual problem. After certain number of molding process, these foreign particles need to be removed without affecting the base metal and finish of the mold to obtain consistent quality of tyres. Synco can assist you for development of a blast-cleaning machine for this purpose.

Thermobox - Keeps the pellets fresh! - Double-wall Thermal Insulation Easy to Transport Robust and Durable Temperature Resistant to -80°C (-112°F) TUV-tested

Syncogrit™ is a sharp, hard, angular, metallic impact abrasive media ideally suited for extremely fast impact blast cleaning of steel and iron objects. Its friability makes it break down during recycling to form smaller particles, inheriting the same sharp, angular properties and shape as the original particles. This unique feature of SyncogritTM results in faster cleaning rates and high productivity. As the particle shape is constantly maintained the abrasive is highly suitable when repeatable, consistent surface profile and finish is desired. Syncogrit™ is ideally suited for compressed air blasting application especially when is high production rate is required. It can be appropriately used in SYNCO compressed air dry blasting machines working on pressure induction suction, and pressure vacuum blasting principles. Being lower in cost it is an economical alternative for steel abrasives. It also offers a viable alternative to copper slag or other expendable abrasive media as it can be recycled up to 50 times.

In medical and surgical tools industry there is requirement for cleaning parts with abrasives to achieve desired / anti glare / matte finish.Finishing of Tweezers, Cleaning of Dental Braces, Finishing of critical metal for joints like hip, knee, elbow, shoulders etc., finishing of critical equipments for cosmetic purpose, Glare free finishing of surgical and hospital instruments, Deburring of hypodermic neddles are some of the application we can assist you with.

Based on induction-suction principle, suction blaster is recommend for cleaning & de-buring small and medium size objects. It ensures uniform and continuous cleaning & finishing each time through the automatic abrasive reclaimer unit. Suction blasting is useful for cleaning of dies/moulds, air craft maintenance etc.  

Nozzles in boron carbide and tungsten carbide (straight shank and venturi type) for all standard blasting machines including suction, pressure, portable, vacuum and wet blasting machines. Specialized nozzles forangular blasting, micro blasting, internal pipe cleaning also available. We also specialize in developing customized  carbide nozzles and holders for machines of any make or kind.

We manufacture and supply hand gloves suitable for shot blasting and sand blasting applications. These can be used for workers carrying out shot blasting in open or in blasting rooms. These can also be used for all cabinet type shot blasting machines of any kind or make.

Scrambler - Dry Ice Mill - Undreamt of possibilities! - cleaning open grooves and undercuts even blasting pattern increased efficiency clean delicate parts sparingly with dry ice powder

The rolls are etched for generating desired surface roughness so that the sheets being rolled out can have inbuilt roughness to facilitate proper bonding of paint. Periodically, these rolls are etched for maintaining desired surface roughness. We have developed a Roll Etching machine for this purpose.

Based on direct pressure principle, the pressure blaster emits the abrasive at high velocity that cleans foreign material from surface rapidly. Faster than the suction blaster, Pressure blaster is recommended for removal of scale, rust, corrosion, coating, paints, cleaning of castings and forgings, surface preparation etc.

Powder Spray Gun is a thermal spraying gun to deposit metals, ceramics or cermets available in powder form on to solid work surfaces. The powder to be sprayed is fed by gravity through a metering valve and is drawn at a reduced pressure into an aspirator chamber. The powder is then propelled through an oxy-acetylene flame. The flame melts the powder and propels the fine molten metal particles towards the work surface to be deposited there in the form of a coating. The gun has several merits. As only a minute amount of the powder is lost by being blown away or consumed in the flame, the deposit efficiencies are very high, nearly 100% in some cases. Sprayed coatings are dense and uniform. The gun can be operated both manually as well as held in a tool post for large volume automatic production. The design of the gun is such that it can spray a wide variety of powders without changing nozzle.

Syncplasticgrit™ media is utilized where a controlled, gentle and non-abrading action, damage or etching of the underlying substrate is required. The low hardness and specific gravity of SyncplasticgritTM makes it ideally suited in the most sensitive of applications. Syncplasticgrit can be used in both dry and wet compressed air assisted blasting equipment and is effective at very low blasting pressures, ensuring no damage to the component being blasted, Syncplasticgrit™ is pre-treated with an anti-static agent to prevent adhesion to the component when used in dry compressed air assisted blasting process to avoid wastage. Its high durability and irregular particle shape ensures maximum productivity and abrasive life when utilized in equipment having recycling and reclassification facilities. Syncplasticgrit™ is highly suited for flash removal from discreet computer components, paint removal or cleaning of soft or easily damageable substrates such as aluminum, silver, copper or gold.  

Pipe robot - Internal pipe cleaner - For Vertical and Horizontal Pipes and Ducts From DN 200 - DN 400 Small and Compact, easy to use Self-Adjusting with Spring Mechanism High Cleaning Performance  

External surface of rods/bars/tubes are cleaned to remove rust/corrosion etc. as a part of surface preparation before subsequent treatment.   Synco has designed an Automatic Blasting Machine for External Cleaning of Metallic Rods/Pipes featured with Roller arrangement for job rotation and linear movement.

High-Performance Heat Exchanger for Maximum Conversion Rate Simple to Install and Use High Pellet Density Production Volume 160 - 200 kg/h

We manufacture Paint Spray Rooms to help improve painting quality and maintain a pollution free environment. Vacuum is created with the help of Axial Flow fan and thus air is sucked from outside of the paint room. Air enters through Inlet Filters and so air is filtered and dust and other foreign particles are filtered enabling us to prevent deposition of impurities on job being painted.   The air flowing downwards takes the over sprayed paint and passes through paint trap filters where paint particles are filtered and clean air is discharged outside paint room. Paint Trap filters can be replaced periodically.           Advantages Of Dry Type Paint Spray Room :   Keeps The Environment Pollution Free. Separates Painting Zone From Other Departments. Improves Paint Finish By Preventing Over Sprayed Paint And Dust Particles To Deposit On Wet Painted Jobs. Provide Safety From Accidents And Fire Due To Hazardous And Inflammable Paints And Solvents . No Requirement Of Disposal Of Sludge As In Wet Paint Spray Room / Booth. Lower Installation And Maintenance Cost As Compared To Wet Type Paint Spray Room . Ease Of Maintenance.

 One hose system - Nozzle case Tornado Professional Nozzle case Vario Set 2000 Plus - Two hose System - Nozzle case GAP 3 Nozzle case SX Micro Plus

These are tailor-made or custom built machines designed for specific purposes wherein the work pieces may be tumbled, rotated, rolled, carried, even pushed, all according to necessity, convenience and economy. In these machines the work is carried upon hangers suspended from an overhead monorail. This type of machine may be classed as a single or multiple pass, indexing, spinner hanger or straight through type. Again the machine may be single or multi wheel type depending on the product size and the required output. The overhead conveyor type machine can be designed to carry weights up to 4 tons per hanger. The layout of monorails circuits may be unlimited in variety. Overhead plants have two outstanding features; continuity of production and flexibility. There are very few workpieces that are not capable of being suspended by some type of suitable hanger.

We at Synco Industries Ltd. manufacture helmets to be used by workers carrying out sand blasting or shot blasting activities in open or blasting rooms. These helmets come along with air breathers and air conditioners and help maximize user comfort and safety during the blasting process. We also manufacture and supply spare parts for existing helmets including inner visors, outer visors etc. 

SyncoLite™ Glass Beads are an established blasting media for air assisted blasting applications using pressure induction, suction and wet blasting principles and is used for cleaning, conditioning or peening metallic surfaces. SyncoLite™ is manufactured from high‐grade crushed and sized glass cullet, which is melted to a spherical shape and annealed for uniform and controlled internal stresses and superior fracture resistance.These transparent spheres which are non abrasive in nature function without any damage to or dimensional change in the surface of the object embedment, contamination or pick‐up. Depending on the selection of size and operating parameters, SyncoLite™ achieves desired surface finish and texture from fine matte to bright satin. Decorative and special effects are achieved by using masking stencils and blasting exposed surfaces with SyncoLite™. Critically tolerant objects, dies, moulds, component etc. can be cleaned, deburred, textured without removing any base metal, ensuring the sanctity of the critical tolerances due to the intrinsic quality of Syncolite glass beads. In addition, the inherent strength of glass beads allows it to survive multiple impacts, making it extremely suitable for use in closed cycle blasting equipment fitted with recycling facilities. Being chemically inert, and non‐toxic, SyncoLite™ Glass Beads do not leave any unwanted or ferrous residue on blasted surfaces. Spent media which is not contaminated is environmentally harmless.