Wet Scrubber Dealers in Jodhpur

Wet Scrubbers make the air clean by making contact of scrubbing water and dirty air. The Wet Scrubber increases its efficiency of cleaning by making larger contact of water and air, and the dirt is not cleaned then also, it recycles. We are the largest Manufacturer, Exporter and Supplier of Wet Scrubbers. In the process of Web Scrubbers, greater will the contact of the gas and liquid streams, higher will be the efficiency of dust removal. There is a large variety of wet scrubbers. The basic configurations possessed them: The "cleaned" gases are normally passed through a mist eliminator (demister pads) to remove water droplets from the gas stream. The dirty water from the scrubber system is either cleaned and discharged or recycled to the scrubber. A Clarification unit or a Drag chain tank collects the dust which is removed from the scrubber. In these systems solid material settles on the bottom of the tank. At last a drag chain system removes the sludge and deposits, into a dumpster or stockpile.

The Wet Scrubber consisting of single stage scrubbing filters which is located at the bottom of multi nozzles. The paint spray fume scrubber is suitable for the collecting 3 micron and above sized particulate. In paint spray fume scrubber the fume is sucked through the ducts connected from paint spray room to the scrubber fume inlet and flows upward through single stage scrubbing filters. The contaminated air get washed by spraying water from spry nozzles and separates the paint dust or fume. The air flows upward through multiple sections tangential set of vanes and flows out through the exhaust fan, thus keeping the environment friendly. the scrubbing liquor is fed by gravity from a inlet water pipe , avoiding the need for blockage prone spray nozzles. The water flows down to distribution cone, which forms the lower face of the vane scrubbing assembly. the particulate laden gases enter the body of the scrubber tangentially allowing large particles to be collected in the lower section submersed in water tank. The paint sludge floating on the water is clean from time to time through the inspection doors at least daily once. The paint sludge that is settled at the bottom of the water tank is cleaned by opening the drain plug at least once in a week. ( the time for removing the sludge may vary as per the working and customer to make its own time schedule) a portion of finely atomized scrubbing water containing the collected particulate is carried upward with the gas to the helical separator. The separator imparts a secondary centrifugal motion to the gas stream as it passes through the vanes, causing the liquor to impinge and separate on the walls of the separate on the walls of the separator chamber. the spraying water get clean in strainer and recycles by a water pump and is then carried by gravity back to the spray nozzles.

In paint spray fume scrubbers, the fume is sucked through the ducts connected from paint spray room to the scrubber fume inlet. It flows upward through single stage scrubbing filters.

stone texturing shot blasting machine, Reverse Pulse Jet Type Dust Collector

Sand Blasting Machines, tum blast type shot blasting machine, Abrasives