Eastern Engineers Latouche Road, Kanpur, Uttar Pradesh

Y-bearings, which are usually referred to as insert bearings, are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.Y-bearings are available singly or as units. Y-bearing units consist of a housing, bearing and seal that is pre-assembled and greased at the factory. These ready-to-mount units can accommodate moderate initial misalignment (Demo) but normally do not enable axial displacement of the shaft.

Thickness : 8 - 30 mm

Bore Size : 10- 80 Mm

Shape : Round

Material : Metal

A belt is a loop of flexible material used to link two or more rotating shafts mechanically, most often parallel. Belts may be used as a source of motion, to transmit power efficiently, or to track relative movement. Belts are looped over pulleys and may have a twist between the pulleys, and the shafts need not be parallel. In a two pulley system, the belt can either drive the pulleys normally in one direction (the same if on parallel shafts), or the belt may be crossed, so that the direction of the driven shaft is reversed (the opposite direction to the driver if on parallel shafts). As a source of motion, a conveyor belt is one application where the belt is adapted to carry a load continuously between two points.

Material : Rubber

Thickness : 15-20mm

Certification : ISI Certified

Length : 1000-1500mm

Application : Industrial

Feature : Long Life, Maintenance Free, Sturdy Construction, Temperature Resistance

Width : 10-15Inch

A Universal Joint is a joint or coupling in a rigid rod that allows the rod to 'bend' in any direction, and is commonly used in shafts that transmit rotary motion. It consists of a pair of hinges located close together, oriented at 90° to each other, connected by a cross shaft. Our Universal Joint Cross has cup diameter varying from 52.37mm-71.3mm.

Material : Metal

Application : Connecting Rigid Rods

Structure : Cross

Thrust Ball Bearings are manufactured as single direction or double direction thrust ball bearings. They are designed to accommodate axial loads only and must not be subjected to any radial load. Thrust ball bearings are separable, i.e. the shaft washer, housing washer(s), ball and cage assembly(s) can be mounted separately.

Material : Metal

Shape : Round

Color : Silver

Feature : Highly Functional, Optimum Finish, Perfect Strength, Precise Design

Tapered roller bearings have tapered inner and outer ring raceways and tapered rollers. They are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide true rolling and low friction. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the angle is related to the calculation factor e the larger the value of e, the larger the contact angle. A single row tapered roller bearing is typically adjusted against a second tapered roller bearing.

Material : Metal

Shape : Round

Color : Silver

Outside Diameter : 100-150mm

Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis .The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, the bearings are self-aligning  and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.

Material : Mild Steel

Shape : Round

Finishing : Polished

Self Aligning Ball Bearings have two rows of balls and a common sphered raceway in the outer ring. The bearings are insensitive to angular misalignment of the shaft relative to the housing. Self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds.

Material : Metal

Shape : Round

Finishing : Polished

Angle Grinders can be powered by an electric motor, petrol engine or compressed air. The motor drives a geared head at a right-angle on which is mounted an abrasive disc or a thinner cut-off disc, either of which can be replaced when worn. Angle grinders typically have an adjustable guard and a side-handle for two-handed operation. Certain angle grinders, depending on their speed range, can be used as sanders, employing a sanding disc with a backing pad or disc. The backing system is typically made of hard plastic, phenolic resin, or medium-hard rubber depending on the amount of flexibility desired.

Certification : CE Certified

Weight : 10-30kg

Voltage : 110V

Warranty : 1 Year

Driven : Electric

A  drill is a tool fitted with a cutting tool attachment or driving tool attachment, usually a drill bit or driver bit, used for boringholes in various materials or fastening various materials together with the use of fasteners. The attachment is gripped by a chuck at one end of the drill and rotated while pressed against the target material. The tip, and sometimes edges, of the cutting tool does the work of cutting into the target material. This may be slicing off thin shavings (twist drills or auger bits), grinding off small particles (oil drilling), crushing and removing pieces of the workpiece (SDS masonry drill), countersinking, counterboring, or other operations.

Certification : ISO 9001:2008

Application : Power Slim Tea

Weight : 2-7kg

Application : Metal Drilling

Rated Power : 1500w

Automatic Grade : Manual

Driven Type : Electric

Warranty : 1year

Oil seals or shaft seals are an integral part in any rotating and moving part assembly. Oil seals find great deal of usage in gearboxes, hydraulic cylinders, etc. The usage of the seals in areas concerned with motion also earns them a name of “Dynamic Oil Seals." The purpose of the oil seals is To act as a physical barrier retaining the lubricating oil where it is bound to be. To prevent thelubricating oil from leaking outside even under high pressure of the oil. To act as a barrier and prevent dirt, contamination and other external entities from entering the system containing the lubricating oil.

Material : Rubber

Shape : Round

Thickness : 20-30mm

Color : Multicolor

Known for exceptional product basket containing O RINGS, we are a reliable name in this sphere. We are aware about the insecurities involved while making online transactions, thus, we strictly offer online and offline payment modes that are handled by the professionals only. We are offering O Rings in different diameters varying from 2-20mm and more. 

Size : 2inch, 6inch, 8inch

Type : O Rings

Material : Rubber

Shape : Round

Thickness : 10-20mm

Application : Connecting Joints, Tubes

Color : Black

Feature : Accurate Dimension, Good Quality, Unbreakable

Needle Roller Bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The ends of the rollers are relieved slightly to modify the line contact between the rollers and raceways. This prevents stress peaks at the roller ends to extend bearing service life. In spite of their low cross section, needle roller bearings have a high load carrying capacity. Therefore, they are extremely suitable for bearing arrangements where radial space is limited.

Material : Metal

Shape : Round

Application : Industrial

Color : Silver

Feature : Highly Functional, Perfect Strength, Precise Design

Outside Diameter : 200-250mm

We have garnered wide appreciation for offering the best quality products that are the best outcome premium material and modern manufacturing techniques. We use quality-approved raw materials as inputs for the production of our finished goods. The selection procedure of the raw materials is conducted by our expert quality auditors. Mobil Oil helps to keep out contaminants from critical engine parts and keeps the engine at its maximum yield.

Application : Automotive

Certification : Iso-9001 & CE

Packaging Type : Plastic Bottle

A Mechanical Seal is a device that helps join systems or mechanisms together by preventing leakage (e.g. in a plumbing system), containing pressure, or excluding contamination. The effectiveness of a seal is dependent on adhesion in the case of sealants and compression in the case of gaskets.

Material : Metal

Shape : Round

Color : Metallic

Speed : 20-40m/s

located in Kanpur(India), we have garnered wide appreciation with our professional behavior and affordable prices. By keeping records of the ever-evolving requirements of the clients, we have adopted a system that facilitate them to make transaction in both online and offline modes. We are offering Industrial oil in a pack of 1 L and more. 

Application : Automobiles

Packaging Type : Plastic Packets

Feature : Durable, Good For Engine Life, Good Shelf Life, Light Weight

Oil Type : Synthetic

Packaging Size : 1.2ltr, 10ltr, 20ltr, 50ltr

Stroke Type : 4stroke

Grease is a semisolid lubricant. Grease generally consists of a soap emulsified with mineral or vegetable oil.[1] The characteristic feature of greases is that they possess a high initial viscosity, which upon the application of shear, drops to give the effect of an oil-lubricated bearing of approximately the same viscosity as the base oil used in the grease. This change in viscosity is called shear thinning. Grease is sometimes used to describe lubricating materials that are simply soft solids or high viscosity liquids, but these materials do not exhibit the shear-thinning properties characteristic of the classical grease. For example, petroleum jellies such as Vaselineare not generally classified as greases.

Application : Automobiles, Bearings, Electric Products

Certification : ISI Certified

Shelf Life : 1yr

Purity : 90%

Texture : Buttery

Form : Paste

Packaging Type : Plastic Pouch

Feature : Extreme Pressure, Long Shelf Life, Remote Located, Rust Protective

Packaging Size : 1-10kg

We are Kanpur(India) based entity, engaged in making available top-of-the-line quality products in the domestic market. We are capable of entertaining the urgent and bulk requirements of the customers owing to the dependable logistics facilities. We are offering V seals in various sizes and thicknesses and in a pack of 12 and more.

Type : Hydraulic Seal

Material : Rubber

Shape : Round

Thickness : 40-50mm

Application : Cylindrical Shockers

Serving the markets of Kanpur(India) and nearby area, we offer top-notch quality range. We ensure our entire range of products is per domestic as well as transnational quality standards, optimum grade and worth the price paid by purchaser. The offered Hydraulic U Seals are made of rubber and available in diameter varying from 5-50 mm.

Material : Rubber

Thickness : 10-20mm

Application : Cylindrical Shockers

Color : Black

We have the moat upgraded machines and technology to make sure that the raw material is completely in compliance with the set standards. This helps us in presenting good quality and defect free products. To ensure utmost satisfaction of the buyers, we make sure that the delivery schedule should be properly maintained. The offered Gear Oil forms a film between gear contact surfaces to reduce friction and enables soft gear operation.

Form : Liquid

Deep Groove Ball Bearings are particularly versatile. They are simple in design, non-separable, suitable for high and very high speeds and are robust in operation, requiring little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available in many designs, variants and sizes. In addition to the bearings presented in this section, deep groove ball bearings for special applications are shown under Engineered products. The offered Deep Groove Ball Bearings are available in sizes starting from 2.778 mm.

Material : Metal

Color : Metallic

Bore Size : 2.5mm

Cylindrical Roller Bearings are available in many designs, series and sizes. The majority are single row bearings with a cage. High-capacity bearings, double row bearings, multi-row bearings, single and double row full complement bearings (without a cage) and split bearings complete the standard assortment provided here.Bearings with a cage can accommodate heavy radial loads, rapid accelerations and high speeds. Full complement bearings incorporate a maximum number of rollers and are therefore suitable for very heavy radial loads at moderate speeds. High-capacity cylindrical roller bearings combine the high load carrying capacity of a full complement bearing with the high speed capability of a bearing with a cage.

Material : Metal

Shape : Round

Color : Silver

Outside Diameter : 100-150mm

Hailing from Kanpur(India), we are engaged in catering to all the customers by reaching their preferred destination. Backed by efficient logistics team, we make deliveries of the goods in the set time span. We offer a wide range of Industrial Coolants available in various packaging like 1L, 2L, 3L, 5L etc.

Packaging Type : Barrel, Tanker

Packaging Type : PP Pack

A pillow block, also known as a plummer block or bearing housing, is a pedestal used to provide support for a rotating shaft with the help of compatible bearings & various accessories. Housing material for a pillow block is typically made of cast iron or cast steel.

Material : Metal

Application : Industrial Use

Weight : 3-4kg

Finishing : Polished

Pressure : High Pressure

Mounting Type : Wall Mounting

Angular contact ball bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The axial load carrying capacity of angular contact ball bearings increases with increasing contact angle. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

Material : Mild Steel

Color : Silver

Bore Size : 2.5mm