Industrial Dryers Dealers in Souter Ganj, Kanpur

SINGHASINI Tray Dryer consists of rigid angle iron frame covered with heavily insulated glass wool on all sides to prevent heat losses from the dryer and mild steel sheet covering , provided with fresh air inlet & adjustable air outlet. The Dryer is finished internally with SS316 / SS304 or Aluminum sheet or heat resistant Aluminum paint to minimize heat losses . Heating is done with electrical heaters / steam heaters or indirect fired hot air generators to achieve required temperature . Cross flow air circulation is maintained in the dryer in such a way that hot air passes over the trays and through it on the sides where it is reheated and recirculated to continue the cycle. A part of air is bled off to reduce moisture content.SINGHASINI tray Dryers are available in 48 , 96 , 192 trays with Aluminum trays and M.S. trolleys . Explosion safety door is available for special application dryer . Dryer is provided with Pre-wired control panel consisting of Digital Temperature Controllers , Contactors , Over Current Relays , Fuses , Indicating Lamps , Push Buttons etc etc.  

We offer rotary dryer operated at almost atmospheric pressure consists of a m.s.cylindrical shell, ranging in length from four to ten times its diameter, into which the wet charge is fed continuously at one end and is discharged at the other, the movement of the material being due usually to the combined effect of inclination of the shell to the horizontal and the action of internal lifting flights during the rotation of the shell. The latter is usually provided with machined girth rings supported on suitable designed bearings. Rotation of the shell is secured by the action of suitable gearing. Hot air produced from hot air generator (direct or indirect ) is injected into the dryer to achieve the required dryness of the material . The discharge end of the rotary dryer consists of sealing arrangement , cyclone and dust collector.