Laboratory Mill Dealers

• Brand Name: VSEW

We are offering lab vacuum pug mill. vacuum pug mill use of ceramics plant & laboratory size:- as per customer req. ceramics insulators plant & technical ceramics.

The laboratory mill we offer is used for preparation of samples for analysis with minimum loss of moisture of volatile constituents. Weight distribution and balancing of rotating parts has been adjusted to provide greater stability and quieter performance with reduced vibration suitability for wider variety of commercial materials. Fitted with 14 hp motor, supplied with nickel palpated hopper of 50 mm dia with cover, there delivery sieves, having tops of 20, 40 and 80 mesh respectively, with plastic receiver, brush, l-n key, cord and plug. Suitable to operate on 220 volts 1 ph , 50 cycles ac supply. features: durability low maintenance reliable operation

• Capacity: 1 kg
• Drum Diameter: 90 mm

Laboratory ball mill is mainly used for various grind able materials dry or wet type in Chemical, Pharmaceuticals, Herbals and Catalyst Industries for super fine micron size grinding.Shree Bhagwati Mechtech (India) Pvt. Ltd. Laboratory Scale Ball Mill is made from all the contact parts in S.S.316 & non contact parts in S.S. 304.The Drum Size: Dia 90 x 90 mm length cylinder type made from S.S.304 Quality. The drum is rotate on two nos. drive shaft and the shaft is rubber coated. The drum is having variable speed through Ac frequency drive for up to 60 RPM. The complete drive unit with motor and gear box is enclosed in structure and it is made from S.S.304Q. The Controls panel provided with ON-OFF push button, Speed regulator, RPM Meter and Process Cycle timer.

We are offering laboratory mills. assuring optimum grinding, our laboratory mills are widely acclaimed in the market. The laboratory mills are made using technologically advanced machinery. The laboratory mills are equipped with quality blades. Our laboratory mills are perfect choice whether there is a requirement to cut hard, brittle, or fibrous substance. variety : batch mills inline mills features : grinding results of 5 millimeters particle size or 0.25 millimeters defined ultimate fineness can easily be attained with an ika millmills attain speeds of up to 20,000 revolutions per minute

• Brand Name: ALPHA CHEM
• Model Number: ALPHA CHEM-69

Ball Mill Laboratory Type : Alpha Chem is manufactures,exporter & suppliers Ball Mill Laboratory Type. Ball Mill Laboratory Type : Laboratory Type Ball Mill is electrically operated heaving capacity from a few grams, to 1 kg. or 2 kg or 5 kg. Fitted with a F.H.P. motor cap. Up to 2 kg. Jar and with ¼ H.P. Heavy-duty motor for 5 kg. jar. Maximum speed 80 R.P.M. supplied with steel balls for mixing and grinding particularly soft powder. Operates on 220V AC mains. Capacity Motor Cap. 1 kg jar 1/4 H.P. 2 kg jar 1/4 H.P. 5 kg jar 1/4 H.P. Optional:- â€Â¢ Automatic 0-60 Minute timer

• Minimum efforts & Manpower during porduction: Zero maintenance free
• Fully Safety design: Fully Automatic
• High Quality Product & Performance: Noise & Pollution free Product

Working principle & features ( multi user dispersing & grinding renders lab disper mill is high-quality dispersion & grinding system provided to reach most important process to achieve a homogenous, grinding, mixing mass of best quality (hegman gauge / nano meter). It can process low, medium or high viscosity product quickly & easily.

• Application: Laboratory
• Weight: 250-300kg
• Material: Mild Steel
• Model: QCCL/LAA/01
• Country of Origin: Made in India
• Voltage: 230 V
• Power Source: Electric
• Phase: 3 Phase
• I Deal In: New Only
• Frequency: 50hz

• suitable: for fast size reduction and homogenization of food and pharmaceutical samples including meat, chocol

• Type: Ball Mill
• Application: Cement Industries
• Certification: CE Certified
• Weight: 100-200kg
• Color: Light White
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 1-3kw, 3-6kw
• Warranty: 1year

Laboratory Ball Mill offered by us, is designed for mixing and grinding purposes in industries such as cement industries, paints, etc. Our range of Laboratory Ball Mill is appreciated for its high performance and longer working life among the clients. We offer Laboratory Ball Mill in different specification to cater the needs of the customers. Specifications : Having capacity up to 1 kg fitted with FHP geared motor with maximum speed of 80 RPM Jar is made of aluminum having steel balls of different sizes Jar is inter-Chargeable and easily removed to operated on 220 V Widely Used For : Grinding Milling Pulverizing Download Details

• Weight: 100-200kg, 200-300kg, 300-400kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 1-3kw, 3-6kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical
• Warranty: 1year

Ball Mill with aluminum jar. For mixing & grinding, electrically operated having capacity of few gms to 1 Kg & 2 Kg. Fitted with geared Motor with max. speed of 80 rpm.The jar is made of SS and having steel balls of different sizes to be put in jar for mixing & grinding pesticides powder.Jar is interchangeable and easily removable, light in weight and compact unit working on 220 V AC with cap. 1 KG.

SITRO scientific is a leading manufacturer company of "BALL MILL LABORATORY TYPE". We can provide you best quality product at very competitive price.

We offer the best quality Laboratory Ball Mill which are highly durable and used for testing the ground cement samples in the Laboratory. Customer satisfaction is of top priority in Central Scientific Instruments Co., and our Laboratory Ball Mill is fabricated from the supreme quality thick steel plate, having an internal diameter of 300 mm. and length of 300 mm. This range of Laboratory Ball Mill undergoes stringent testing measures before they are allowed to go to the market and are designed keeping in view the industry standards. Laboratory Ball Mill is available in an encompassing range to our clients at leading market prices. Technical details Rotation of drum is regulated at 30 rpm.Fitted with an electric motor Reduction gear box to operate on 220 volts, single phase, 50 cycles, AC supply Fitted with revolution counter Fitted with water and air tight cover Supplied with Abrasive Charge Used in Cement industry Paint industry Granite industry Tiles industry.

• Power:  220V/50Hz
• Weight:  50Kg
• Grinding Chamber: Designed Volume: 400ml Effective Volume: 200ml
• Inner Chamber material:High wear resistant hard alloy 9CrMo18: Outer Materia: SS304
• Grinding pin and rotor material:High wear resistant hard alloy 9CrMo18: Cooling Mode: Cooling water passing through gridning chamber
• Mechanical Sealing: Self design mechanical seal. Sealing Support : SS304
• Dispersion & Grinding: ROOT patented turbine and pin type rotor. Dispersing linear speedï¼Âš10.2 m/sec
• Separating mode: Dynamic separation; no stuck and high efficiency
• Grinding Media: 95% zirconia beads Zirconia beads spec : Dia 0.4 mm- Dia 1.4mm Filling quantity recommendedï¼Âš50% á·Â‰ 90%
• Dimension: 540(L)x 190(W)x240(H)mm  

• Brand Name: Premier Enterprises
• Phase: Single Phase
• Country of Origin: Made in India
• Power Supply: 440/ 220 Volt, Three Phase , 50 H.
• Power Consumption: 1.5 Kw
• Sample consistency: Variable between 5-50%
• Roll Revolution Counter: Digital with Six Digit counter
• Beating Time: 2-10 Min Depending On the Pulp Quantity
• Gap Adjustment: The clarence between the roll and badplate by mean of an adjustable vernier screw
• Applicable Standard: APPITA/AS P 209,CPPA C.7, ISO 5264/2 SCAN C24 TAPPI T 248

meeting the requirements of various industries, anant enterprises is leading its competitors by offering precision engineered lab mixing mill in fine quality. Available in all standard and custom-made designs, these machines are well suited in rubber, construction, plastic and other engineering industries. besides, the rollers of lab mixing mill are generally cooled by water and heated by the steam inside. While, the motor pump is force-feed lubricated for oil recirculation in brass. Known for its low operating cost and easy maintenance, these can easily be install in any application areas. our machines are highly renowned due to its elite features like compact sizes, high grade components, optimum performance, user-friendly and much more. That’s why we are enlisted as one of the magnificent manufacturers, exporters and wholesale lab mixing mill supplier from punjab, india. features of lab mixing mill smooth functioning compact design easy to use easy to install uni drive model with control panel easy maintenance reliable applications of lab mixing mill thermal refining mixing plastic of raw rubber

Santec's two roll mixing mills are widely used for mixing and kneading raw rubber, synthetic rubber, thermoplastics or eva with chemicals into even materials. The even materials can be fed to calender, hot presses or other processing machinery for manufacturing rubber or plastic products. These mills are available in various capacities with bushings or self-aligning roller bearings, and manual or motorized nip adjustments. Mills are specially fabricated to mix newer and tougher compounds in a silent and trouble-free manner. Two roll mixing machine can also be customized to meet the specific application requirements of the clients.

• Brand Name: ELOQUENT TECHNOLOGY
• Material: MS
• Driven Type: Electric
• Color: Grey, Yellow
• Condition: New
• Automatic Grade: Semi Automatic
• Application: Cement Industries, steel,ore etc
• Certification: ISO 9001:2008
• Model: ball mill

We are the manufacturer of laboratory scale ball mills. With vfd and controller • body of welded mild steel with suitable machined flange. • the machined end plates will be provided with mild steel shell. • shell body and end plates will be of mild steel and inner shell is with stainless steel • the mill body will have a charge and discharge opening with suitable gasket to make the mill water and dust tight. • mill will be supported on heavy duty antifriction bearings mounted on structural steel frame work. • mill is driven by a motor through a speed reduction gear box • the acoustic enclosure and collecting hopper is fitted with shell • geared motor with break

• Capacity: 5 Kg

Laboratory Ball Mill is primarily designed for grinding pigments. The material is ground at a specific speed by using a specific quantity of grinding media (steel balls) for a specific period. The equipment is used for making the ground cement samples in the laboratory. Apart from the cement industry, it is also used in the paint, plastic, granite and tile industries.

• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1yrs
• CFM Required: 20
• Required Power (HP): 7.5
• Capacity (KG/HR): 0.1 - 0.8

r & d model or qualifying model emco has designed this new and compact lab model for r & d purpose and also it acts as a qualifying model for the higher size production models. the latest designed computational fluid dynamics (cfd) is a branch of fluid mechanics that uses numerical analysis and data structures to solve and analyze problems that involve air flows. computers are used to perform the calculations required to simulate the interaction of carrying medium with surfaces defined by boundary conditions. this subsequently improved geometry of the milling chamber and ring integrated nozzles have led to a very narrow psd (particle size distribution). documentation to support fda validation design qualification (dq) operation qualification (oq) factory acceptance test (fat) installation qualification (iq) performance qualification (pq) features of jet mill - emco psi lab narrow particle size distribution (psd) simple and rapid assembly or disassembly limited number of components low energy consumption sterile manufacturing no heat generation no cross contamination variety of available liners to resist abrasion benefits for the cosmetics industries ultra-fine loose and compact powders improved metallic pigments effect perfect skin adherence increased binding effect ultraviolet radiation reflecting properties