Water Purification Plants Dealers in Kalyanpur, Kanpur

• Type: Industrial Ro Plant
• Application: Water Purifies
• Color: Blue, White
• Automatic Grade: Automatic
• Power: 1-3kw
• Usage: Industrial

flow rate : feed water:9000 liter per hour treated water:6000 liter per hour reject water:3000 liter per hour raw water pumppurposeto feed the dual media filter at pressure more than 2.0 bar, which is min. operating pressure for filter.specifications moc : ci type : horizontal centrifugal flow rate  : 14400 liters per hour head : 25 m power required: 3 hp electrical : 440 v, three phase , 50 hz cycle : 2900 rpm make : kirlosker, cri, crompton greaves. quantity  : 1 no. dual media filterpurposeto remove the total suspended solids, dirt , iron and reduce silt density index which can foul the membranesspecificationsvessel : make : pentier or equivalent material of construction : frp diameter : 30” height : 72” mm testing pressure : 10 kg/cm2 opening : top and bottom quantity : 1 no. valve : make : initiative material of construction : type : multiport single lever value size : 1.5”  inches maximum flow rate: 24000 lph working pressure : 2-4 bar working  :  down-flow media :mixed bed sand media consisting of the followingi) gravel   ii) pebbles  iii) quartz sand  iv) anthraciteaverage porosity  50 micron particulate sizebed depth  : 600 mmpipelines & accessories:pipe of pvc 10 bar tested pressureactivated carbon filterpurposeto remove the total color, smell, odor, from the water.specificationsvessel: make: penteir or equilent material of construction: frp diameter: 30” height: 72” mm testing pressure: 10 kg/cm2 opening: top & bottom quantity: 1 no. valve: make: initiative material of construction: noryl type: multiport single lever value size: 1.5 inches maximum flow rate: 24000 lph working pressure: 2-4 bar working:  down-flow media:mixed bed sand media consisting of the followingi) gravel   ii) pebbles  iii) carbonaverage porosity 50 micron particulate sizebed depth: 600 mmpipelines & accessories:pipe of pvc 10 bar tested pressuredosing system :purposeto dose antiscalant chemical to protect the scaling formation on ro membranes.specifications moc : pp ( e-dose) capacity : 6 lph pressure : 7 bar qty. : 1 no. micron filter :purposeto remove the fine particles up to 05 microns and reduce silt density index levels to acceptable level.specificationscartridge filter & housinghousing  :make: flowtec moc of housing: pp length : 20” diameter: 5.5” quantity : 4 no. cartridge : make : flowtec cartridge moc : polypropylene length:  20” diameter : 4.0” quantity: 4 no. micron rating : 05 micron high pressure pump :purposeto feed the reverse osmosis membrane at pressure more than the osmotic pressure taking into consideration flux rate, flow and recovery.specificationsmoc : stainless steel type : vertical multistage flow rate  : 10500 liters per hour head : 120 mwc power required : 5 hp electrical : 440 v, three phase , 50 hz cycle : 2900 rpm make cri or lubi ro membranepurposeto remove the major part of tds upto 98% by reverse osmosis membranes arranged and designed to give adequate flow and recovery.specifications type : spiral wounded diameter of membrane : 8.0 inch length of membranes : 1 mt. no. of membranes : 5 recovery per membrane : 10-15% salt rejection per membrane  :  98-99% make of membranes :  toray or equilent system recovery : 45 -55 % ro pressure tubepurposeto pack reverse osmosis membranes and operate at high pressure up to 300 psispecifications moc : frp composite diameter of pressure vessel : 8.2 inch length of pressure vessel :  120” no. pressure vessels : 2 no. of membrane per vessel :   2 and 3 make : seaflo, shark or equilent position : horizontal, series arrays  : 2 no. electrical panel :purposea control panel is provided as a safety measure for the pumps & other electrical items.specifications complete starters, overload relays, and single-phase preventor for pump. voltmeter, ammeter, mcb’s, indicating lights push buttons instrumentation :purpose flow meter : to measure the online flow of water low pressure switch  : to protect ro pump from dry running high pressure switch  : to protect ro pump from back pressure pressure gauges  :  for calculate ^p for each unit in ro system specificationsrota meter : quantity   :2 nos.( permeate & reject line) range  : 1.0 cu.m. per hour make  : flowtec pressure switch :     quantity : 2 no.(low & high) range  : 0-450 psi make  :  indfos, india                pressure gauges  : quantity  :  6 no. range :  0 – 7 bar dail size  :  6  inches type  :  bourdon make  : h-guru plumbing & fittings valves, pipelines ro module is in upvc, the system will be on common ss base frame