Testing Equipment Dealers

• Color: Blue
• Condition: New
• Automatic Grade: Automatic
• Application: Industrial Use
• Feature: Easy To Use, Electrical Porcelain
• Country of Origin: India
• Warrenty: 1year
• Puncture Voltage: 220V

Peel Adhesion Tester provides a relatively inexpensive way for determining the peel adhesion, seal and tensile strength of packaging, tapes etc. 

Environmental Walk-in Test Chamber Manufacturers & Suppliers in USA, UK, Russia EWS-Series Walk-in Environmental Chambers with custom-built features to meet testing needs of large-sized test specimens. Mono-block walk-in chambers are designed for high-temperature operations using high-grade materials. Pre-fabricated panel structured walk-in chambers are designed for low and medium temperature operations. Both Water-cooled and Air-cooled mechanical refrigeration system available with hermetic or semi-hermetic compressors for better efficiency. Configured for temperature and relative humidity conditioning in the system ensuring high temperature accuracies, reliable test results. Integrated/remote refrigeration compartments and control panel. Control Console ET-touch color touch programmer RS-232, RS-485, USB, Ethernet and USB host port Height adjustable specimen racks Cable ports Built-in web server which allows remote monitoring and operation of your test chamber from any Internet connected PC or Smart Phone Optionals - Remote Control Console

• Type: Microprocessors
• Application: Laboratory
• Operating Temperature: 0-30 Deg C
• Frequency: 50Hz
• Surface Finishing: Polished
• Functionality: Memory
• Pick Up Accuracy: +/-12.5 %
• Auxiliary Power Supply: 85-270V

• Country of Origin: India
• Material: Iron & Mild Steel
• Pattern: Plain
• Usage/Application: Industrial
• Pin Size: 8 mm
• Grade: Manual
• Surface: Paint Coated

• Body Material: Aluminum, Plastic
• Power Source: Electric
• Application: Energy Monitoring
• Certification: CE Certified
• Voltage: 24V V
• Type: Automatic
• Warranty: 1 Year
• Country of Origin: India

• Power: 1.5 KW
• Reference Standards: ASTM & IS.
• Furnace size: 10 x 8 x 8 inch.
• Temperature Range: Ambient to 1000 °C.
• Temperature control system: Microcontroller based PID controller.
• Resolution: 1 °C
• Accuracy: ± 2 °C.
• Supply: 230 VACS/ 50 Hz.
• Paint: Powder Coated
• Special Feature: Compact with safe assembly for glassware's.

• Material: Mild Steel
• Usage: Hardness Testing
• Display Type: Analog
• Country of Origin: India
• Brand Name: Aditya Instruments
• Loads: 15,30,45,60,100,150 Kgf
• Initial Load: 3 & 10 Kgf
• Max.test Height: 295mm
• Depth of Throat: 150mm
• Max. Depth of Elevating Screw Below Base: 310mm
• Size of Base (approx): 210x470mm
• Machine Height: 845mm
• Net.weight (approx): 126 Kg

• Condition: New
• Material: Metal
• Warranty: 1 Year
• Dimension: 230 mm (H) X 250 mm (W) X 540 mm (L) (Approx.)
• Weight: 15.5 Kg. (Approx
• Operating Temp. Range: 10º-50º C

Creating ideal conditions for Industrial component / product research and Bio technical specification test. Most accurate and reliable chamber for long term high temperature and RH testing.   Note :- We have different Diameters / Capacity as well in the product

• Type: Automatic
• Certification: CE Certified
• Color: Grey
• Voltage: 220V
• Driven Type: Solar
• Warranty: 1 Year
• Usage: Laboratory

• Country of Origin: India
• Type: Diesel Nozzle
• Application: Industrial Use
• Frequency: 45Hz
• Warrenty: 1 Year
• Size: Standard
• Material: Aluminum

• Power: 1-3kw, 3-6kw
• Automation Grade: Semi Automatic
• Application: Industrial Use
• Feature: Durable, High Accuracy, Low Maintainance
• Voltage: 110V, 220V
• Weight: 10-50kg

Holding years of expertise in the industry, we, as a Manufacturer, Exporter & Supplier, offer Martindale Abrasion Cum Pilling Tester. We manufacture the best quality thanks to our skilled professionals, sophisticated technology and latest machines. 4 Heads is used to check the abrasion as well as pilling resistance of the fabric/garment. The raw material used in manufacturing Martindale Abrasion Tester is procured from reliable vendors who refuse to compromise with quality.   Vgotech Martindale Abrasion Tester Cum Pilling Tester With preset digital counter & standard accessories.  Accessories : 140mm cutter - 1pc., 38mm cutter -1no. Weights for 12 kpa & 9 Kpa, Rubber Pad -2pc PU Foam, Abradant Fabric & Non Woven Felt.

PENETROMETER WITH BATH FOR BITUMEN & TAR(Analog Version) Penetrometer with bath for Bitumen &Tar Test : As per IS: 1203/1978   Use: Used for the determination of penetration of asphaltic bitumen and fluxed asphalt and blown type bitumen, Petroleum wax & jelly.   Description: Bath Unit consists of container of 20cm (H) x20cm (W) x35cm (L) Argon welded, needle, SS Cup 55mmdiax35mm (H) 8No. Transfer dish4No., Water bath Inner of SS304 and outer powder coated finish with motorized stirrer cum pump and a flange type hot+cold zone immersion SS304 heater of 1.5 Kw rating to maintain desired temp.   Temp. Range: 0°C-95°C, having cooling & heating arrangement controlled by a Digital Temperature controller cum indicator with PT-100 Sensor, Continuous duty Kirloskar compressor for cooling, electrically operated DC 230V plunger, penetration indicator between 225&350, Needle with 50 gms. and 100 gms. weights and timing device. Digital penetrometer for direct readout of penetration having Encoder & Decoder arrangement with digital timer 9.9 sec Max. The whole unit is mounted on castor wheels for easy movability.

Chloride Permeability Test Apparatus. Rapid Chloride Permeability Test Equipment (RCPT) has multi-port testing facilities is designed to test concrete samples of 100mm diameter with 50mm thickness for concrete ion permeability test. All the easy connections are ready to use chloride ion permeability test instrument. Customer can test up to four samples at a time as per ASTM C1202 - Electrical Indication of Concrete̢۪s Ability to Resist Chloride Ion Penetration, AASHTO T277- Electrical Indication of Concrete̢۪s Ability to Resist Chloride Ion Penetration (Rapid Chloride Permeability Test) and ASTM C1760 - Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

• Parameter: HRC
• Display Type: Digital
• Accuracy: 0.1%
• Model Name/Number: PROLH320
• Dimension: 198 x 82 x 30 mm
• Automation Grade: Semi-automatic

• Finishing: Polished
• Color: blue
• Condition: New
• Application: Industrial, Laboratory
• Feature: Easy To Operate, Good Quality
• Pattern: Plain
• Packaging Type: Box
• Type: Dial Calibration Tester
• Country of Origin: India

We are a reputed company dealing with Dial Calibration Tester with LC = 0.1 / 0.2 / 1micron

Power on type tests 6,12 and 24 volt circuits. For wire breaks, short, fuses, lamps, relays armatures, etc. 75mm inspection probe with point cover. 120cm long 16# wire with alligator clip. 000000000000000000000000000000

• Material: Mild Steel
• Certification: CE Certified
• Voltage: 220V
• Condition: New
• Driven Type: Electric
• Phase: Single Phase
• Warranty: 1yrs
• Country of Origin: India
• Brand Name: DBK

EIGHT Test Model - Auto Lifting Arrangement TABLET DISSOLUTION RATE TEST APPARATUS HSN Code 9027 (As per USP std.) Microprocessor based Digital Temp. amb. to 45.0°C, Digital RPM 25 to 160 with accuracy of ± 1 RPM.& Digital Timer Presetable from 1min to 99Hrs 59Min OR 99Min.59Sec with alarm, Provided with Round Bottom Glass Jar, Paddle & Basket.

• Type: High Temperature Data Logger
• Material: Stainless Steel, 316 SS.
• Certification: YAS
• Weight: 4.2 Oz (120 G).
• Color: BLACK
• Voltage: User Replaceable.
• Condition: New
• Application: Process Monitoring Or Troubleshooting
• Power Source: User Replaceable.
• Warranty: 1Year
• Accuracy: 0.18°F (0.1°C) @ 68 To 284°F (20 To 140°C); 0.54°F (0.3°C) @ -4 To 67.98°F (-20 To 19.99°C).
• Brand Name: DWYER USA
• Name: Series HTDL-20/30 High Temperature Data Logger