BPL Cardiart 9108 ECG Machine
1 Per Piece
1 Piece (MOQ)
BPL ECG Cardiart 9108Cardiart 9108 comes with a QWERTY keyboard and a high resolution foldable 5.7" display. This device is easy to use, measure and can store upto 200 recordings in its internal memory. It enables simultaneous 12 channel ECG recording with 12 lead simultaneous acquisition.Features Simultaneous 12 channel ECG recording with 12 lead simultaneous acquisition 5.7 inch high resolution foldable display enables the easy viewing of patient demographics and real time ECG data option The user-friendly design of the machine ensures easy operation ensures the freedom of easy use Built-in ECG parameters measurement and interpretation Supports external archiving devices such as USB drive, flash disk, SD card for virtually unlimited ECG data storage Pace maker detection ensures recognition of pacing signal artifacts Different print modes include pre-sample, real time sample, period sample and arrhythmia triggered sample Has an Internal Memory, which can store up to 100 ECG recordings High performance Li-ion rechargeable battery enables mains independent operations and provides battery use after charging Optional Data transmission to PC
Slump Cone
Get Price Quote
We are offering slump cone.
Best Deals from Laboratory Apparatus
Hemodiaz Digital ECG Machine
35,000 - 40,000 Per Piece
15 Piece (MOQ)
Spring Loaded Roller Apparatus
Get Price Quote
Spring loaded roller is capable of applying fixed load of 50N (5 Kgs) as per the standard when pressed. Caltech’s compact spring loaded roller can be held by hand firmly, easily pressed to get desired load and reduce human errors for applying constant pressure to provide best dust test results. Calibration adjustment is possible simply by adjusting nut. One single broad roller spring loaded roller along with dust test kit helps to accurately determine size and particle size of dust particles on steel surfaces prior to painting. Assure equal pressure for the complete tape to get best results. No maintenance required for this instrument.
Digital Melting Point Apparatus
Get Price Quote
1 Piece (MOQ)
Contec 300G 3 Channel ECG Machine
26,200 Per Unit
1 Unit (MOQ)
Plate Bearing Test Apparatus
130,000 Per Piece
1 Piece (MOQ)
This is for estimating the bearing capacity of shallow foundations in situ and for the design of flexible pavement. In the test procedure a steel plate is subjected to gradually increasing load and settlements of the plates recorded. The out fit consists of50 tonne hydraulic jack with separate pumping unit fixed to it a 0 - 500KN x 0.5KN. 1No. Pressure gauge and flexible metal pipe5 mtr. long 1No. Special ball and socket arrangement between the jack and the bearing plate 1 No. Extension rod 12mm dia x 25 cm long for taking dial gauge readings 16 Nos. Magnetic base with female thread on top for holding extension rod 4 Nos. Top end plate, 50mm, dia with male thread for fitting onto the extension rod sand positioning the dial gauge plunger 4 Nos. Column 15cm dia x 25cm long with flanges complete with four bolts and nuts 2 Nos.Column 15cm dia x 50cm long with flanges complete with four bolts and nuts 1 No. Bridge support of welded steel angle construction, 5 mtr. Span and stands approximately 30 cm. High. Fitted withtwo quick release clamps a for positioning and holding the dial bracket 2 Nos.Other Details: Plane M.S. plate 60cms x 60cm . Square x 60 cms. Square x 25mm thick. Plane M.S. plate 45cm x 45cm x squarex 25mm thick. Plane M.S. plate 30 cms x 30 cms x 25mmthick. Dial Gauge 0.01mm x 25mm - 4 Nos. Accessories: Plane M.S. 75mm x 25mm thick Plane M.S. 50cm x 25mm thick Grooved M.S. plate 60cms x 60cms x 25mm thick Grooved M.S. plate 45cms x 45cms x 25mm thick Grooved M.S. plate 30cms x 30cms x 25mm thick Grooved M.S. plate 75cms x 75cms x 25mm thick
BIS Standard Diffusible Hydrogen Testing Apparatus
Get Price Quote
This standard covers the procedure for determination of content of diffusible hydrogen in deposited weld metal arising from the use of Shielded Metal Arc Electrodes, Gas Metal Arc, Flux cored Arc , Submerged Arc and MIG wire Welding Process by Mercury method. IS : 11802-1986 (Reaffirmed 2003)
Disintegration Test Apparatus
15,000 - 20,000 Per Piece
The double basket enclosed with glass tube by clamps holder. The equipment basket work Up & Down the tablets in medium of water movement in glass beakers cap. 1lit. the vertical drive shaft moves Up & Down by 7.5cm driven by geared motor and control by speed regulator provided. The upper end of the shaft fitted horizontal strip with clamps on either side. These clamps hold glass vessels open at both end with S.S mesh wire sheave with rubber ring at lower end, witch drip in water. The apparatus built on sturdy M.S powder coated finished box fitted with acrylic water bath enclosed with glass beakers temp. Control by PID temp. Controller. The panel with all controls switches, indicator and digital timer and temp. With main cord and plug provided. The apparatus Works on 220 volts A.C main.
Cornsil Particle Size Determination Apparatus
Get Price Quote
50 pcs (MOQ)
Since 1995, we have been functioning as Laboratory Particle Size Determination Apparatus, Sendimentation Pipette Manufacturer, Exporter and Supplier from Pondicherry, India. Featuring wide. Sendimentation pipette Andreasen- Comprising of 550ml glass cylinder graduated from 0 to 2 cm and an inner fitting with a pipette. the pipette capacity is 10ml and it is provided with a 3 way stopcock for drainage inteo a weighted dish.
ECG Machine : ECG - IE101
Get Price Quote
1 piece (MOQ)
Cod Digestion Unit
Get Price Quote
1 Piece (MOQ)
Fully Automatic Leak Test Apparatus
Get Price Quote
UNIQUE FEATURES : Extremely “compact” construction Diaphragm type vacuum pump Polycarbonate vacuum desiccator Stainless steel (GMP) construction Vacuum level up to 22’ of Hg Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level which is connected ti isolation valve to disconnect the source. Thus avoiding the need of continues running of vacuum pump. 99 minute Digital timer helps the operator to do other work It's amazing compactness saves lot of valuable place in process laboratories.
Dissolution Test Apparatus
6,760 - 95,000 Per Piece
1 Piece (MOQ)
Dissolution Test Apparatus to carry out simultaneously six tests of dissolution rate of tablets and capsules as per USP standard. These tests are carried out by quality control and R & D Departments in pharmaceutical industry. It consists of constant temperature water bath made of transparent acrylic . Temp. is controlled by fully solid state controller.Specifications: Timer: Microprocessor based preset timer 00:01 to 99:59 Hrs with alarm. Bath: Made up of 10mm thick clear acrylic 300mm W X 200mm D X 200mm H Heater: 350 watt stainless steel. Temperature Controller: Digital Microprocessor Based.
Reynolds Apparatus
Get Price Quote
The flow may be laminar or turbulent. Osborne Reynolds (23 August 1832 - 21 February 1912) was a prominent innovator in the understanding of fluid dynamics and mechanics. Osborne Reynolds Apparatus consists of water resource for the system supply, fix-head water input to big and small transparent pipes, dye input by injection unit, and water output unit to determine water flow rate. The laminar, transition and turbulent flows can be obtained by varying the water flow rate using the water outlet control valve
Breathing Apparatus
Get Price Quote
Stripping Value Apparatus
15,000 - 18,000 Per piece
1 Piece (MOQ)
Kjeldahl Distillation Apparatus
Get Price Quote
2901 Disintegration Test Apparatus
Get Price Quote
1 Piece (MOQ)
Disintegration Tester is a solid state instrument designed for the accurate estimation of disintegration time of tablets as per IP/USP standards. The instrument is designed to test two batches of six tablets, simultaneously. The unit is extremely useful for pharmaceutical industries. It is used in quality control and R & D to determine compliance with the disintegration requirement of the tablet and capsule as per USP/BP/IP standards. Instrument uses the latest microprocessor technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts, which guide you throughout the measurement process. The instrument has two basket assemblies with independent timers and motors. The timers and temperature are displayed on 5 digit and 3 digit seven segment red LED displays respectively. Each timer can be set and used individually. The baskets are automatically positioned at the top when the test is over. The unit is provided with two glass beakers having capacity of 1000 ml with arrangement to hold temperature sensor placed in the sturdy, acrylic water bath. The large spread out stainless steel heater ensures perfectly uniform heating. The instrument has a dual channel temperature system with sensors to monitor the test temperature of disintegration beaker as well as water bath. The temperature of the water bath and vessels are accurately maintained using highly accurate sensors and microcontroller technology. The basket speed is accurately controlled and maintained as per IP, USP specifications. Features Complies with USP, IP specifications Extremely useful for pharmaceutical labs Microprocessor based, easy to use Seven segment LED display 10 Soft touch membrane type keys User friendly operation with current status indicators Supports Two USP baskets assemblies. Each basket is controlled by independent Timer and Motor Programmable temperature controller Auto parking of the basket at the top position at the end of the test External probe for beaker temperature validation
COD Digestion Apparatus
22,500 - 49,500 Per Piece
1 Piece (MOQ)
TECHNICAL SPECIFICATION Model No. 470 Capicity 6 Sample 15 Sample available in Model No.471 Sample Capicity 20ml Reaction Vessel Dia 38mm Temperature range Ambient to 250 degrees Timer Range 99 hours , Auto shut off Display LED timer and temperature Dimension (410X290X255) mm Outer Body MS duly coated Top Cover SS 316 Power 230V, Single Phase A/C, 50hz
Post Free Ad
5.0
