Instrumentation Equipment Dealers in Kaladi, Kochi

• Country of Origin: India
• Type: Dryer Control Panel
• Voltage: 220V
• Body Material: Mild Steel
• Power: 3-6kw, 6-9kw
• Power Source: Electric, Solar
• Phase: Single Phase
• Warrenty: 1 Year
• Autoamatic Grade: Fully Automatic

Does your Dryer machine have automation capabilities? As a manufacturer are you searching for automation systems that can be easily integrated? Would you like to provide an add-on service with smart connectivity? Don’t worry we have it covered. Our RD 150 Dryer controller enabled with Wi-Fi will do the trick. Just plug in our controller, connect your system to our device, set the required parameters and see the results. Link the device with your wifi system and get all the details in your phone through our app and monitor from anywhere. What does our controller offer Temperature and Humidity sensors Timer setting and auto cut-off WIFI enabled to let you see the data remotely & Configure

PowerFlex® 525 AC Drives feature an innovative, modular design to support fast and easy installation and configuration. This next generation of compact drives offers embedded EtherNet/IP™ communications, USB programming, and standard safety features. PowerFlex 525 drives, which offer a power rating of 0.4...22 kW (0.5...30 Hp) with global voltage classes of 100...600V, provide a variety of motor control and flexible mounting options. PowerFlex 525 AC drives operate at temperatures as high as 70 °C (158 °F), and they are ideal for applications such as conveyors, fans, pumps, and mixers.

• Brand Name: Microsun
• Warranty: 25 years
• Open Circuit Voltage (Voc): 22.32V
• Model: MS12150
• Dimensions: 1475X655x35mm
• Weight: 7.5kgs
• Short circuit current (Isc): 8.8A
• Maximum system voltage: 1000V DC
• Maximum power at STC (Pmax): 150W
• Rated voltage(Vmp): 18.5V
• Rated current(Imp): 8.12A
• 8.12A Open circuit voltage(Voc): 22.32V
• Short Circuit current(Isc): 8.8A
• Module efficiency: 14.5%
• Operating temperature: -20???C to 90???C
• Maximum System voltage: 1000VDC
• No of cells: 36
• Product Warranty: 10 years Performance Warranty

The USS will comprise of HV 12 KV Load Break Switch Panel, Cast Resin Air Cooled Transformer, with associated protection and Ventilated Housing.The whole assembly is mounted on to a rigid base of steel fabricated section. The units are factory assembled, tested and they will be despatched in dissembled condition. All the dissembled components can be assembled at site.   HT LOAD BREAK SWITCH PANEL   Load Break Switch is suitable for indoor application and is used to switch ON/OFF the 11 KV supply. The Load Break switch works on the principle of extinguishing the Arc by a blast of compressed air, produced by the switch itself, while opening. During the switch off operation, the Arcing contact maintains continuity while the main contact travels along with the piston attached with it, compressing the air in the pressure cylinder. After a predetermined length of travel, the arcing contact opens striking on arc. At the same time, a blast of compressed air, extinguishes the arc, through the nozzle surrounding the arcing contact. The Air Break Switch is provided with HT Fuse and earthing facility. The panel is designed to segregate completely incoming and outgoing termination chambers with Epoxy resin cast seal off bushings. The HRC fuses are easily with drawable type so that fuses can be renewed easily. When the fuse switch operates on fault, the mechanism would give simultaneous break on all three phases and also would go into lock position to prevent closure until the blown fuses are replaced. The busbars will be 630 Amps rating, aluminium or electrolytic copper, tinned, supported by epoxy insulators

Automation Components, PLC OR HMI, Sensors, Pumps

Aluminum terminal box, aluminium glazing profiles, aluminum hub

glued panel board, Block Board, Flush Doors, Block Boards

starters, communication equipments, sockets with plug tops, rv lamps

Automobile Components, Sheet Metal