Jaw Chucks Dealers

• Type: Self Centering Chucks
• Shape: Round
• Application: Machinery
• Color: Grey
• Finishing: Polished
• Brand Name: Unnat

The following features of the GMT four jaw chuck makes this chuck superior to other four jaw independent chucks available.The chuck body is made of forged medium carbon steel. It is hardened and tempered to ensure long life and strength to the chuck body. Base jaw slots in the body are precision ground to close tolerances for obtaining a good sliding fit, ensuring a play free functioning, high load carrying capacity and maximum wear resistance.GMT system of independent four jaw chucks has separate jaws and reversible hard jaws. This gives the flexibility to use special hard jaws to suit specific component. The hard jaws are fixed to the base jaws by tongue and tenon, so that they can grip a wide range of components, either on their OD or ID.Base jaws are made of alloy steel and case-hardened. Itis made deeper and wider for providing large bearing areas with reduced unit bearing pressure, thereby increasing the life of the chuck. Square threads cut on the screws and on the underside of the base jaws have longer mesh with each other, which results in efficient transmission and conversion of applied torque. Screws are heat treated to prevent breakage, a common complaint in the commercial quality chucks.

• Diameter of Chuck: 100MM

Self Centring Lathe Chucks 3 Jaw These chucks are best suited to grip circular cross-section. These chucks are also used for gripping hexagonal cross-section. These are often used on lathe.

We offer spl 6 jaw power chuck for ring components machining wehre ovality problem of turned components has to overcome.

• Type: 3 Jaw Self Centering Chuck
• Brand Name: ASSORTS
• Model Number: AMRTC-80.3
• Place of Origin: India
• Name: 80 mm 3 Jaw Self Centering Chuck

A high quality 80 mm 3 jaw self centering chuck body made from sg iron & jaws are of tool steel hardened & ground. A set of reversible jaws is supplied extra. Supplied with a mounting back plate & fixing tee nuts with screws. Designed to fit our 3 or 4" rotary table with either 3 or 4 slots & hv456 rotary tables. For hv4 5 6 rotary tables, our back plate's spigot extension is machined to mt2 shank that fits to the centre hole of the table for a perfect centre match & hence no error in its working. The back plate has been drilled in a manner that it will fit to a 3 slot or a 4 slot rotary table. The recess of the back plate is machined perfectly to fit the recess of the chuck to avoid any play. The recess of the back plate is machined to exactly fit the recess of the chuck.

• Application: CNC Machine
• Finishing: Coated
• Number of Jaws: 4
• Features: Optimum strength, Easy installation, Rust proof
• Size: 150mm to 1800 mm
• Color: Grey

We are a unique entity in the industry, actively committed towards offering an optimum quality range of Four Jaw Independent Chuck. In synchronization with the set industry standards, this chuck is well manufactured at our vendors end under highly experienced professionals using high grade raw material and latest technology. Owing to its easy installation and optimum strength, our provided chuck is highly demanded among our clients.  

• Type: Jaw Chucks
• Material: Cast Iron, Steel
• Application: CNC Machine
• Condition: Good, New
• Finishing: Coated
• Packaging Type: Box, Carton
• Power Source: Electric, Hydraulic
• Number of Jaws: 3
• Country of Origin: India
• Brand Name: Seco, Turno, Zither
• Power: As Per Standard

These chucks are available with 3 Jaws, 4 Jaws and are refered as BBC-3, BBC-4 and BBC-6 respectively. These are similar to Normal Standard Chucks, the only difference is that the bore is larger than normal Chucks. These Chucks are used where machine is lighter and the job requires large bore in the chuck. One set of Reverse Jaws, Mounting bolts, Operating Key and inspection report is provided with each chucks.

We are offering 60 inch 8 jaw lathe chuck. our company manufactures and supplies a wide range of optimum quality lathe chucks. The comprehensive array of lathe chucks which we offer is especially used for the manufacturing of for heavy duty and rigid gripping products. Due to the quality rich features, our entire range of lathe chucks is highly demanded in far east and middle east countries. These are made from high grade greated caustings and mild steels. We provide the wide assortment of lathe chucks in excellent wooden boxes. gni manufactured specially for heavy duty and rigid grippingbodies of semi-steel are made from selected materialbrinell hardness is kept to the standard ratiosmooth finish test every chucks after completion is put on testthe gripping and alignment of jaws is tested by dia-indicator grinding round back and front surfaces of body are grinded for accurate runningevery step of jaws is tested by dial indicator supervision every jaw is checked with the micrometer under specialized supervision every time guarantee these chucks are fully guaranteed against defect from either faulty workmanship or faulty materialthe chuck is covered during its working life against breakdown or failureevery chuck carries one full year unconditional guarantee and services big bore the 4-jaw independent chucks have larger bore than normal chucksthese are suitable where machine is light and the job demands larger boreoperating key, mounting bolts and inspection report is provided with each chuckallen key & tap is provided with gni chucks brand specialists in fitting top quality of gni chucks is due to its efficient control & distributed tension of jaws over the bodyit is maintained by fitting the third (back) sliding surfaces of jaws closely into the third of actual

• Material: Cast Iron
• Shape: Round
• Color: Grey
• Size: 10"
• Diameter: 110 mm to 600 mm

• Features: Reasonable prices , Long Life , Maximum Gripping Power .

Top Hard Jaws Power Chucks Spare Top Hard Jaws are available for all type of Power Chucks. for clamping goods to work with higher accuracy and production

This chuck is available with 3 jaws and is reffered as LOC-3. This is light weight lever operated chuck is specially designed for use by craftsmen on instruments, watchmaker's lathe, bench lathes, grinding machine as well as on small sized machine tools. The body of this chuck is made out of SG Iron to avoid breakage due to slim design of body. The grip of these chucks is limited as the design is without gearing. However this feature has advantage aiso. The sensitive movement avoids the danger of crushing and have great versatility for gripping fragile materials and components. Knurled ring, which operates the jaws, give ample grip for light work when hand operated, but a lever is provided for use where a stronger grip is required.

Heavy Duty chucks refereed as HD, are suitable for normal working conditions. However these chucks will stand well ahead in Quality, Load carrying capacity and Life if compared with other competitive brands available in the market. Where other brands of chucks fail to give service, our chucks will give trouble free service for long period. The jaw-ways in body are of robust proportion which can withstand heavy loads. The diameter of screws is large enough to tolerate heavy cutting pressure and moreover large diameter of screws provide more contact area with threads of jaws. ACME threads of screws are very strong as the same have 29 degree taper. These do not break easily due to strength provided by large base of taper thread. Chucks from 160mm onward have double type thrust bearings of robust proportions which provide great strength. Operating Key, Mounting Bolts & Inspection Report is provided with each chuck.

• Material: Matel
• Condition: New

We are named amidst the major Manufacturers, Exporters, and Wholesale Suppliers of cutting-edge 3-4 Jaw Self Centring Chuck (Zither Chucks) in Maharashtra, India. The 3-4 Jaw Self Centring Chuck is designed as per the set industrial quality standards. The 3-4 Jaw Self Centring Chuck is efficient in performance and long lasting in nature. Attributes Robust construction Meets industry standards Unmatched performance Longer functional life

These chucks are called Master Gripping Chucks because the Jaws of these chucks are split into two parts. Master jaws (base jaw) and top soft Jaws Master Jaws has a slot on the Top, which helps to Mount reversable Top Hard Jaws &Top Soft Jaws with Bolts.

6" to 4" Single Slott16" to 48" Double Slott

Since the day of our inception, we are engaged in supplying jaw chuck and offering the same at competitive rates. From marketplaces of Tamil Nadu(India) to all the others, our organization is capable of providing the product to purchasers as per requirement.

• Size (ins): 3/8 ,1/2
• Available: Wooden, Plastic handle

Double speed with 3 jaw Chuck.

• CHUCK SIZE INCH: 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30
• CHUCK SIZE: 100, 150, 200, 250, 300, 350, 400, 450, 500

Independent 4 Jaws Lathe Chuck Have Each Jaw Mounted On A Thread Spindle Allowing Independent Adjustment. Hardened Solid Jaws. Sizes Up to 96”. Bigger sizes also available.

3 Jaw Self Centering True Chuck.  The width of jaws for 4" x 4" jaw chuck is 0.500 ins. The size of mounting bolt for 4" x 4" jaw chuck is 1/4" and the hole to suit it is 9/32"

These are special 2-Jaw Self Centring Chucks.These chucks usually have high height jaws with threaded holes. These jaws are kept soft so that machining or welding can be done on them. Special type of fixture can be mounted on the Jaws to suit special jobs.

• Number of Jaws: 3 and 4
• Material: Cast Iron
• Automation Grade: Manual

• Type: Jaw Chucks
• Application: CNC Machine
• Packaging Type: Box
• Country of Origin: India

Shop jaw Chucks available at Daljit Machines in 3 and 4 jaw chuck versions useful in metalworking production made from superior quality material. Self-aligning 3 jaw chuck is a general type that best suited to grasp hex bar stock whereas the main aim of 4 jaw independent chuck, a specialized metalworking accessory with its with four independent jaws can be centered to high precision and supplies versatility to keep hold of rectangular stock as well as other non-cylindrical shapes. The Chucks are made of special kinds of clamps in rotating nature which grip materials or tools together. 4 jaw chucks are different from 3 jaw chucks that holds square, round, hexadecimal shapes type work pieces in which the chunk wrench is used to adjust each chunk independently. Furthermore, reverse side of the diameter jaws are useful to seize hold of the superior work. Daljit Machines has mastered in offering brilliant quality of chucks to their clients.

SPECIAL NOTES : The width of jaws for 4" x 4" jaw chuck is 0.500 ins. The size of mounting bolt for 4" x 4" jaw chuck is 1/4" and the hole to suit it is 9/32"