Anchor Fastener Dealers in Kolhapur

• Type: CHEMICAL ANCHOR
• Material: Zinc Plated
• Application: Industrial
• Feature: High Quality
• Brand Name: ICFS
• Country of Origin: India

The Chemical Anchor Stud CAS is a chisel ended anchor. It is used with any of our injection systems and glass capsules in masonry and concrete. On installation the stud becomes chemically bonded to the base material. Notably the fixing method imposes no expansion stress on the base material, and is ideal for shock or vibratory loading and for softer or low density building materials where expansion stresses would normally result in failure. The method also gives exceptional performance for close centre and close to edge fixing. The nut may be removed and replaced without affecting the anchorage. The chemical anchor CAS is supplied complete with high tensile hex nut and plain washer in addition to one external hex drive adapter in each box.

• Type: Nut, Custom build
• Material: Alumunium, Bronze, Carbon Steel, Iron, Stainless Steel
• Diameter: 10-15mm
• Application: Industrial Use
• Feature: Corrosion Resistant, Fastener
• Surface Treatment: Dacromet, Phosphated, Zinc Plated
• Thread: Coarse, Full Thread, High Resistance

We are offering mini anchor rivet nut mini-anchor rivet nut is an internally threaded device, which when flared on a sheet provides a strong and permanent thread in sheet metal. It is space and weight saving option for weldless joint. It is available in different materials like steel, stainless steel, brass. Sizes are m2.5 to m10. Finish available zinc blue or yellow passivation

• Brand Name: Leaded
• Material: Metal
• Finishing: Blue prompted plating
• Surface Finishing: Polished
• Color: Silver
• Condition: New
• Application: Industrial Use, Internal Locking, Joint Use
• Length: 0-10mm, 10-20mm
• Feature: Light Weight, Long Life
• Standard: BS
• Type: Rivet Nuts
• Diameter: 1-3mm, 3-6mm, 9-12mm
• Country of Origin: India

We are offering chemical capsule. Description the chemical capsule ccs is a high performance rapid cure spin-in chemical anchor system based on optimum measured proportions of high strength epoxy acrylate resin, chemical activator and quartz aggregate sealed in a glass capsule. It is a fast install, simple to use system requiring no special tools and provides high strength stress free anchoring in concrete and solid masonry. The system operates by spinning a chisel ended anchor stud using the required drive adaptor through the capsule using a rotary hammer drill which crushes and mixes the contents in the drill hole and intiates the curing process, the stud is left in position to fully cure and from a high strength bond which is stronger than the base material. Capsule sizes are drill hole specific from m8 to m30 diameters. The system can be used with longer than standard threaded bars combined with multiple down hole capsules, studs should be cut chisel ended and separate drive adapters are available for connection to a drilling machine. Advantages rapid cure. Consistent load behavior. Suitable for static and dynamic loading. Fast and simple to install. Imparts no expansion stresses on the base material. Usable in wet drill holes ( requires longer cure time). Drill hole cleanliness not as critical as injection systems. High-performance resin guarantees high loads in the base material. The resin anchoring is free of expansion forces and permits low axial spacings and edge distances. Flush finish, no projecting bolt after dismanting the fixture.

Description The chemical capsule CCS - V is a high performance rapid cure spin-in chemical anchor system based on optimum measured proportions of high strength vinylester resin, hard - ener and quartz aggregate sealed in a glass capsule. It is a fast install, simple to use system requiring no special tools and provides high strength stress free anchoring in concrete and solid masonry. The system operates by spinning a chisel ended anchor stud using the required drive adaptor through the capsule using a rotary hammer drill which crushes and mixes the contents in the drill hole and initiates the curing process, the stud is left in position to fully cure and form a high strength bond which is stronger than the base material. Capsule sizes are drill hole specic from M8 to M30 diameters. The system can be used with longer than standard threaded bars combined with multiple down hole capsules, studs should be cut chisel ended and separate drive adapters are available for connection to a drilling machine.

Rivet Nuts

threaded rivet nut, panel fasteners, Precision Turned Component

rivet nut, Fashion Garment, corby rivets, Pop Rivets, Rivets, Eyelets

earth anchors

Plastic Molding Nut Inserts

earth anchor, Marine Docking Anchors