Hardness Tester Dealers in Kabnur, Kolhapur

Features Rockwell, Rockwell Brinell Combined, Rockwell/Rockwell Superficial Combined System Hardness Testers.ARUN Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc.These testers strictly confirms to IS : 1586-2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 -2005, ASTM : E 10 for Brinell test.

• Material: Metal
• Display Type: Digital
• Usage/Application: Industrial
• Grade: Automatic
• Test Loads: 5, 10, 20, 30, 50 kgf
• Power Supply: 220 VAC, 50Hz, 1-Phase
• Optical Measuring Range (mm): 0.1 to 1.0
• Maximum Test Height (mm): 200
• Scale Least Count (mm): 0.001
• Throat Depth (mm): 135
• Weight (approx): 70 Kg
•  :  

• Model Number: AI-RAS
• Brand Name: ARUN MAKE

ARUN Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc. These testers strictly confirms to IS : 1586-2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 -2005, ASTM : E 10 for Brinell test.   MODEL - AI- RAS   Automatic load selection with automatic zero setting dial guage. Manual operation.

• Accuracy: 1 %
• Hardness Scale: HV
• Display Type: Optical or Digital
• Load: 5, 10, 20,30 & 50 kg
• Weight: 180 Kg
• Depth of throat: 133 mm

We are ranked among the most credible Manufacturers and Suppliers of Hardness Testing Machine in India. All the models of Rockwell Hardness Testing Machine are suitable for testing hardness of metals & alloys of all kinds - whether hard or soft, flat, round or irregular in shape. Rockwell Hardness Testing Machine is simple in design, easy to operate, and quite sensitive. Rockwell Hardness Testing Machine is used in schools, laboratories, tool room, inspections departments, industries etc.

we offer vickers hardness tester that is suitable to be used for testing various products & raw materials. This computerised vickers hardness tester model: model vm 50 pc is reckoned for its state-of-the-art features, thus, has great market demand. We offer the vickers hardness tester to the clients at reasonable price. specifications vickers hardness tester model : vm – 50 pcbuilt in projection screen to get accurate resultstests loads : 5, 10, 20, 30 & 50 kgf.scale least count 0.001 mm features fully computerised (pc based) vickers hardness machinedirect and accurate measurement of vickers hardness number using "state of art" image processing technologywide testing range' : from soft metal such as lead up to medium hardened steelshigh accuracy and repeatability of measurement at all loadsfaster measurement yielding to higher productivitysmall size of indentation makes it a non destructive testing on finished components motorised loading and unloading cyclesmall loads allow testing of thin sheet metalsadvanced window xp based software latest gui features user friendly software with all help file and window features online indentation setting and focusing on pc monitoradvance image processing : algorithms implemented for precise calculation of hardness numbers with various options to cover all ranges of specimen

The company has acquired the status of the leading Manufacturer, Exporter & Supplier of Vickers Hardness Testing Machine. The Model-TVM 50 Vickers Hardness Testing Machines is one of the simplest and most accurate when it comes to the hardness measurement of precision metallic parts. The Vickers Hardness Testing Machine produces and measures diamond indentation and has a wide testing range varying from soft to hard. Features Robust machine frame designed to accommodate the high precision loading system Strictly conforms to IS: 1754 – 1986Optical projection screen also available Testing table for placing specimens Fully automatic test cycleAccurate load applied automatically on diamond penetratorsObjective indexed with test piece Diamond indentation projected on measuring screensDiagonals of indentation measured by means of the micrometer screw of projection screen

• Hardness range: 790 ±40 HLD
• Uniformity: ≤9HLD
• Diameter: 90 ±1mm
• Thickness: 55 ±1mm
• Surface roughness (Ra/um): ≤0.02
• surface(mm): ≤0.03

MTMS ICHALKARANJI make Hardness Standard Blocks are manufactured tested and calibrated by NABL Accredited laboratories in INDIA with following features Flatness maintained Within 0.010 mm Subzero process for hardness test blocks Demagnetized process done for all hardness bloc Thickness maintained as per standard With better accuracy and repeatability With minimum measurement of  Uncertainty NPL, New Delhi calibrated Hardness Test blocks also available Dispatched With safe Plastic or wooden box. Your company name printed on  test block test or calibration certificate   Hardness Test Blocks Tested and Calibrated with following Standards Hardness Test Method  : IS Standard Rockwell : IS 1586 (Part 2) :2012 Brinell : IS 1500(Part2):2013 Micro Vickers  Hardness Test Blocks : IS: 1501 - 2013 Vickers  Hardness Test Blocks : IS: 1501 - 2013

• Material: Mild Steel
• Color: White
• Operating Type: Semi Automatic
• Display Type: Digital
• Specialities: Easy To Use, High Strength
• Type: Rockwell Hardness Tester
• Country of Origin: India

Rockwell & rockwell superficial tests consists of forcing an indentor (diamond or ball) into the surface of a test piece in two steps i.e. First with preliminary test force and thereafter with additional test force and then measuring the depth of indentation after removal of additional test force (remaining preliminary test force active) for measurement of hardness valve.

As we are counted among the reliable names in the industry, we are involved in carrying out a secured payment processing method. We undertake both online and offline methods for the convenience of the clients. Owing to our association with the reliable vendors, we are able to obtain quality-approved and certified inputs. Thus, we ensure that our products are of unmatched quality. Our avant-grade J Brinell hardness testing machine is available with a quality warranty of 12 months. 

• Parameter: HB
• Display Type: LCD
• Brand Name: RATNAKAR
• Automation Grade: Automatic
• Model Name/Number: RB 3000 O PC TS
• Weight: 1500 KGS 

• Material: Stainless Steel
• Color: Silver
• Material: Steel
• Diameter: 50 Mm
• Dimensions: 60 X 42 X 10 Mm
• Weight: 0.19 Kg
• Surface treatment: Polished
• Hardness range: 790 ±40 HLD

We are one the reliable and trusted Hardness Test Block manufacturers and suppliers from Ichalkaranji, Maharashtra. We offer supreme hardness test block machines that are made from premium quality materials that offer long life and durable structure to them. The testing hardness test blocks offered by us are widely used in engineering firms and construction sector for testing the strength of machines used therein. The wide demand of our hardness blocks in market testifies our claims of being the foremost Hardness Standard Block manufacturers and suppliers based in Ichalkaranji, Maharashtra. Variants Rockwell Rockwell Superficial Vickers Brinell D.T.H. Applications Engineering firms Construction industry Oil & Gas sector  

• Height: 165
• Width: 115
• Depth: 40
• Range: 0-100 Nos.

Consists of Carbide tipped plough, dial indicator. Employees scratch type test to check bonding and hardness of cores. To find out the hardness of baked or dried cores made out of core sands, resin sands etc.

We are a proficient manufacturer, exporter and supplier of computerized brinell hardness tester model no. - kb-3000 (o) from mumbai, india. Our model 2 kb-3000 (0) is an electrically operated hardness testing machine, which is suitable for mass testing of components made of steel and other materials whether flat or round. Our computerized brinell hardness tester model no. - kb-3000 (o) is accessible at very reasonable prices.

Principal : Rockwell & Rockwell Superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.Brinell test consists of forcing a hardened ball into surface of a test piece with a specified test-force and measuring the diameter of indentation for evaluation of Brinell hardness number.   Operation : For Rockwell & Rockwell Superficial Test : In case of 'RASN' series machines for Rockwell & Rockwell superficial tests a preliminary test force in first applied and then indicator is automatically set for zero. Quickly thereafter an additional test force is applied without removing the preliminary test force. When the penetration is stabilised, the additional test force is removed and the hardness number is shown directly on the indicator.   For Brinell Test : The operation is exactly same as above. However, the diameter of impression is measured outside of machine by Brinell microscope. Brinell hardness number is found out by referring corresponding hardness tables showing hardness number against dia. of indentation for specified ball diameter and test force.       • Suitable for Rockwell Tests.• Manually Operated.• Preliminary Test Force - 98.07 N (10kgf).• Additional Test Force - 490.3, 882.6, 1373N    (50.90, 140 kgf).• Total Test Force - 588.4, 980.7, 1471N    (60, 100, 150 kgf).• Test Force Selection by external dialing.• Auto zero setting dial gauge.Rockwell cum Brinell Tester, Model RASN (B)• Same as RASN above in additional• Additional Test Force - 1471, 2354N   (177.5, 240 kgf) • Total Test Force - 1839, 2452N (187.5, 250 kgf)

Digital Hardness Tester for Rockwell Tests has motorized automatic cycle operation i.e. loaddwellunload. The Preliminary Test Force is 98.07N (10kgf). Total Test Force is 588.4, 980.7, 1471N (60,100,150 kgf). Test Force Selection is by external mechanical dial. The system has bar indication on display for Preload. User can set Preload Dwell time, Dwell time for Total Load and Elastic recovery Dwell time. The operation is easy with keyboard entry through reliable membrane switches for scaleHI-GO-LODwell time selection. The scale display is with 0.1 Rockwell Resolution.

Machine designed with a hydraulic power pack and control circuits for effortless loading unloading operations. A dial gauge in front measures depth of ball penetration. This facilitates production testing within tolerance limits by compression method Mechatronic Control System Hardness Testers Model B-3000(H), (O) & (J) are precision engineered to IS:2281- 1968, BS:240 and ASTM:E10. However B-3000(H), (O), (J) are most suitable for production testing. These machines are designed to measure hardness of casting, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape. Technical Data SPECIFICATIONS UNIT Mech.CS.B3000(H) Loads 200 500 to 3000 in stages of 250 Initial Load kgf 250 Max. Testing Height mm 410 Depth of Throat mm 200 Max. Depth of elevating screw below base mm 180 Size of Base mm 370 x 670 Machine Height mm 1127 Net Weight (Approx.) kg. 450 Drive Motor HP 0.33-415v/p Standard Accessories MODEL SE B-3000 H Testing table 200 mm 1 pc Testing table Y groove 70 mm 1 pc Ball Holder 5 mm 1 pc Ball Holder 10 mm 1 pc Test Block HB - 5/750 1 pc Test Block HB - 10/3000 1 pc rockwell Microscope 1 pc Allen Spanner 7 pcs Instruction Manual 1 book

• Specialities: These machines come in three basic versions.i.e.Pure rockwell models,Rockwell cum Rockwell Superficial models and Rockwell cum Brinell models.

    Krystal hardness Testers are designed and developed after years of experience in this field.All models are manufactured under strict quality control at all manufacturing stages.   All these models are suitable for testing hardness of Metals and alloys.   All types of shapes, i.e.Round, Flat, and other irregular shapes like castings etc. can be tested on these machines. All relevant fixtures can also be supplied.   These Testers are simple in design, easy to operate and maintain.   All Krystal make hardness testers meet relevant National and International standards like BS 819 part I & II, ASTM- E18, ASTM - E10 etc.

The company is one of the renowned Manufacturers, Exporters and Suppliers of Digital Rockwell Hardness Testing Machines in Ichalkaranji (India). The Digital Rockwell Hardness Testing Machines come with a digital hardness tester for the Rockwell tests and have automatic motorized loading and unloading cycles. The selection for the test forces can be done by external dialing and the Digital Rockwell Hardness Testing Machines provide easy operations with a LED bar indicating the set positions. Specifications Of Digital Rockwell Hardness Testing Machines : Preliminary Test Force : 98.07 N (10 KGF)Additional Test Force : 490.3, 882.6, 1373N (50,90,140 KGF)Total Test Force : 588.4, 980.7, 1471N (60,100,150 KGF)Parallel output for connecting dot matrix printer to get results indication serial number of tests, hardness scale, hardness value and high/good/low indicationKeyboard entry through reliable membrane switches for scale / GO-NOGO/dwell time selectionLarge size scale display for easy reading with 0.1 Rockwell resolutions Download

• Load Capacity: 500 to 3000 in stages of 250 kgf
• Voltage: 440 V
• Frequency: 50 Hz
• Model Number: KB 3000 H
• Drive Motor: 0.33 HP
• Machine Height: 1125 mm
• Max Test Height X Throat: 410 mm
• Size Of Base: 370 X 670 mm
• Depth of Throat: 200 mm
• Net Weight: 450 kg
• Phase: 3

• Voltage: 220 V
• Material: Mild Steel
• Frequency: 50 Hz
• Finishing: Color Coated
• Corrosion Resistant: Yes
• Phase: Single Phase
• Drive Type: Electric

We are engaged in offering Brinell Hardness Testing Machine that is used for testing the hardness of metals and alloys. Our Brinell Hardness Testing Machine allows loading and unloading operation manually by durable operating lever. Salient Features Precisely designed as per BS: 240, IS: 2281-1968, and ASTM: E10.RB-3000Easy to operateDurableLess wear and tear Ideal For Measuring hardness of casting and forging of hard, soft, whether flat, round and irregular shapes metals and alloys

Simple to operate and accurate test results are some of the guarantees that are given by this Vickers Hardness Testing Machine. This Vickers Hardness Testing Machine measures hardness of any accurately designed metallic part. The tested specimen (metal) can range from soft to hard. Conforms To : IS : 1754 :2002 & ISO 6507-2 : 1997 Features : Tiny indenation allows testing of a precision finishedWide testing range, from soft metal such as lead, up to the hardest, like hardened steelSame hardness number is obtained on the same specimen, Regardless of the load appliedMotorized loading and unloading cycleThin Sheet metal is perfectly tested. Because applied load is very smallBuilt-in Projection screen to get accurate"AI" make Vickers Hardness Tester is simple & accurate in design, It is Suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard & their accurate results are widely acclaimed.These testers strictly coform to IS :1754 :2002 & ISO 6507-2 : 1997

• MODEL NO: B3000(H)

Test loads 500 to 3000 kgf. in steps of 250 kgf. Capacity - Throat 200mm. Max test height 410mm. Hydraulic power pack and control circuit for effortless loading/unloading operations. Facilitates production testing within tolerance limits as set on dial gauge. Conform to IS: 2281, BS: 240 & ASTM:E10