Hardness Testing Machine Dealers in Kabnur, Kolhapur

Principal Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.   Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high / low limits, dwell time, auto / manual start, printer selection, scale selection etc. All set data can be very ARUN edited by pressing SCL key one after another.Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading / unloading cycle will be completed and hardness is shown on LCD display with High / Good / Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading / unloading cycle automatically & hardness is shown on LCD Display with High / Good / Low indication.   ARUN's new 'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes This is motorized machine having automatic loading/unloading cycle suitable for production testing. The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine looks like new over year. The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is retained for years together due to hardened bush. A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy. An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy. IS:1586:2000 for Rockwell and superficial test. IS:2281:2005 for Brinell hardness test.

• Overall dimensions: 486*337*657 mm
• Depth of Throat: 130mm
• Power consumption: 100W
• Measuring range: 5-3000HV
• Weight: 68 kg
• Brightness of the light source: PWM

We manufacture and supply Vickers Hardness Testing Machine in India. Our Vickers Hardness Testing Machine is simple & accurate in design. Vickers Hardness Testing Machine is suitable for measuring the hardness of precision metallic parts with wide testing range – from soft to hard & accurate results are widely acclaimed. Our Vickers Hardness Testing Machine strictly conforms to IS:1754: 2002 & ISO 6507 – 2: 1997.Features : Wide testing range, from soft metal such as lead, up to the hardest, like hardened steel Tiny indentation allows testing of precision finished parts. Thin sheet metal is perfectly tested because applied load is very small. Same hardness number is obtained on the same specimen, regardless of the load applied Motorized loading and unloading cycle Built – in projection screen to get accurate result.Construction : To accommodate the high precision loading system & an optical projection screen the machine frame is designed sturdy. Specimen is to be placed on testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetration by means of a lever & weights. The load is removed automatically after a specific lapse of time. The objective is indexed with the test piece & the diamond indentation is projected on the measuring screen. The diagonals of the indentation can be measuring by means of the micrometer screw of the projection screen.

• Brand Name: ARUN MAKE
• Model Number: AI-VM 50

Testing range is very wide, from soft metal such as lead, upto the hardest, like hardeness steel. Same hardness number is obtained on the same specimen, regardless of the load applied. The indication is tiny and allows testing of a precision finished part. Loading and unloading cycle is motorised. Thin sheet metal is perfectly tested because the load applied is very small. Built-in projection screen to get accurate results.

• Material: Metal
• Display Type: Digital
• Usage/Application: Industrial
• Grade: Automatic
• Test Loads: 5, 10, 20, 30, 50 kgf
• Power Supply: 220 VAC, 50Hz, 1-Phase
• Optical Measuring Range (mm): 0.1 to 1.0
• Maximum Test Height (mm): 200
• Scale Least Count (mm): 0.001
• Throat Depth (mm): 135
• Weight (approx): 70 Kg
•  :  

• Parameter: HB
• Display Type: LCD
• Brand Name: RATNAKAR
• Automation Grade: Automatic
• Model Name/Number: RB 3000 O PC TS
• Weight: 1500 KGS 

• Voltage: 110V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Weight: 100-200kg
• Automatic Grade: Automatic
• Digital: Digital

Rockwell Hardness Testing Machines We are ranked among the most credible Manufacturers and Suppliers of Rockwell Hardness Testing Machine in India. All the models of Rockwell Hardness Testing Machine are suitable for testing hardness of metals & alloys of all kinds - whether hard or soft, flat, round or irregular in shape. Rockwell Hardness Testing Machine is simple in design, easy to operate, and quite sensitive. Rockwell Hardness Testing Machine is used in schools, laboratories, tool room, inspections departments, industries etc. Rockwell Hardness Testing Machines Are Used When: - there is need for high speed testing the size of the indentation is small there is no scope for human error there is need to distinguish even the slightest difference in hardness Precautions To Take When Using Rockwell Testing Machines the sample should be dry, smooth and oxide free the anvil and indenter should be well-seated and clean the surface on which the sample is placed should be absolutely flat & perpendicular to the indenter the loading speed should be standard

The company has made steady progress as a Manufacturer, Exporter & Supplier of Superficial Rockwell Hardness Testing Machines. The wide range of the Model T TWIN Superficial Rockwell Hardness Testing Machines is precisely engineered and provides accurate results. The Superficial Rockwell Hardness Testing Machine offers the automatic setting of dial gauge and can be availed at the best prices. Technical Specifications Test Loads : 60, 100 & 150 kg for Rockwell test 15, 30 & 45 kg for Rockwell superficial testsCapacity : Throat 150 mmMaximum Test Height : 295 mmConfirm to IS: 3804, BS: 891 & ASTM: E-18 for Rockwell testsConfirm to IS: 5073, ASTM: E 18 for Rockwell superficial tests

Machine Designed With a Hydraulic Power pack and control circuit for effortless loading unloading opertations . A dial gauge in front measure depth of ball penetration. This facilities production testing with tolerance limits by compression Method

• Driven Type: Electric
• Power: 1-3 Kw
• Voltage: 220V
• Max. Test Height: 410 mm
• Dept of throat: 200 mm
• Machine height: 995 mm
• Net Weight: 450 Kg
• Optical Device: Direct reading optical device with 14 x magnification

The company is one of the reputed Manufacturers, Exporters and Suppliers of Manual Brinell Hardness Testing Machines in Ichalkaranji (India). The Manual Brinell Hardness Testing Machines can be availed in various types. Widely used in the various industries, the Manual Brinell Hardness Testing Machines are efficient in performance. Model Al-B 3000 (H) : Designed with a hydraulic power packControl circuit for effortless loading unloading operationDial gauge in front measures depth of ball penetrationEasier production testing within tolerance limits by compression method Model Al - B 3000 (O) : Basic machine design and operation similar to Al B-3000(H)'Optical device' with 14x magnification provided for diameter projection of ball impression on glass screenMicrometer measuring system with 0.01 mm accuracyIndenter swivels and projects diameter of ball impression immediately after unloading operationAvoids additional time for measurement of ball impressionGives real Brine-H number on production testing Model AI-B 3000 (J) : Simplest model of Brinell Hardness Testing Machines with mechanical designEasy loading and unloading manualBest suitable for testing batch quantities Hardness Testers : Precision engineeredConform to IS: 2281-1983, BS: 240 & ASTM: E10Most suitable for production testingDesigned to measure hardness of casting, forgings, other metals and alloys of various shapes and types Technical SpecificationsModelUnitAI-B 3000(H)AI-B 3000(O)AI-B 3000(J)Loadskgf500 to 3000 stages of 250500 to 3000 in stages of 250500 to 3000 stages of 250Initial Loadkgf250NilNilMax. test heightmm410380254Depth of Throatmm200200150Max. depth of elevatingScrew below basemm1801800Size of basemm370 X 670370 X 670255 x 495Machine Heightmm11271185860Net Weight (Approx)Kg.450500210Drive MotorHP0.33-415 v/p0.33-415 v/pNil Download

Principal : Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.   Operation : Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high/low limits, dwell time, auto/manual start, printer selection, scale selection etc. All set data can be verified edited by pressing SCL key one after another.Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading/unloading cycle will be completed and hardness is shown on LCD display with High/Good/Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading/unloading cycle automatically & hardness is shown on LCD Display with High/Good/Low indication.     FIE's new 'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes.   1) This is motorized machine having automatic loading/unloading cycle suitable for production testing. 2) The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine  looks like new over year. 3) The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is retained for years together due to hardened bush.  4) A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy. 5) An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia. 6) These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy. 7) IS:1586:2000 for Rockwell and superficial test. IS:2281:2005 for Brinell Hardness Test.

Simplest model of rockwell Hardness Testing Machine with mechanical design. Loading, unloading manual, Best suitable for testing batch quantities. Mechatronic Control System Hardness Testers Model B-3000(H), (O) & (J) are precision engineered to IS:2281- 1968, BS:240 and ASTM:E10. However B-3000(H), (O), (J) are most suitable for production testing. These machines are designed to measure hardness of casting, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape. Technical Data SPECIFICATIONS UNIT Mech.CS.B3000(J) Loads 200 500 to 3000 in stages of 250 Initial Load kgf Nil Max. Testing Height mm 254 Depth of Throat mm 150 Max. Depth of elevating screw below base mm 0 Size of Base mm 255x495 Machine Height mm 860 Net Weight (Approx.) kg. 210 Drive Motor HP Nil Standard Accessories MODEL SE B-3000 J Testing table 200 mm 1 pc Testing table Y groove 70 mm Nil Ball Holder 5 mm 1 pc Ball Holder 10 mm 1 pc Test Block HB - 5/750 Nil Test Block HB - 10/3000 1 pc rockwell Microscope 1 pc Allen Spanner 4 pes Instruction Manual 1 book

• Driven Type: Electric
• Application: Industrial
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant
• Material: Metal

We are actively engrossed in manufacturing & supplying of Vickers Hardness Testing Machine from Maharashtra, India. Made from the top-notch quality material, our Vickers Hardness Testing Machines are widely acclaimed owing to their longevity, reliable performance and sturdy construction. We are acknowledged for our smooth and timely solutions. Buyers can avail Vickers Hardness Testing Machines at feasible prices.   Features : Robust design with easy to operate features. Fom very soft materials (lead) to very hard materials (hardened steel) can be tested with precision and consistency. Can be used on finished components as the indentation is very fine and in most cases does not damage the component. Loading and unloading cycle is motorized. With load capacity starting from 5kg, thin components can be tested. The optical system is fitted with proper illumination and micrometer measuring system. This reduces operator fatigue and errors.

Simple to operate and accurate test results are some of the guarantees that are given by this Vickers Hardness Testing Machine. This Vickers Hardness Testing Machine measures hardness of any accurately designed metallic part. The tested specimen (metal) can range from soft to hard. Conforms To : IS : 1754 :2002 & ISO 6507-2 : 1997 Features : Tiny indenation allows testing of a precision finishedWide testing range, from soft metal such as lead, up to the hardest, like hardened steelSame hardness number is obtained on the same specimen, Regardless of the load appliedMotorized loading and unloading cycleThin Sheet metal is perfectly tested. Because applied load is very smallBuilt-in Projection screen to get accurate"AI" make Vickers Hardness Tester is simple & accurate in design, It is Suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard & their accurate results are widely acclaimed.These testers strictly coform to IS :1754 :2002 & ISO 6507-2 : 1997

• MODEL NO: RAB-250

  Test Loads - 60, 100, 150 kgf for Rockwell test and 187.5 and 250 kgf. for Brinell tests. Automatic zero setting dial gauge. Load Selection just by a dialing externally. Capacity - Throat - 150mm, Max test height - 295 mm Conform to IS: 3804, BS: 891 & ASTM: E - 18 for Brinell tests.

• Country of Origin: India
• Type: Hardness Testing Machine
• Color: Multi Colour
• Voltage: 110V, 220V
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1year
• Application: Checking Hardness
• Weigth: 20-30kg, 30-40kg, 40-50kg

We are a proficient Manufacturer, Exporter and Supplier of Computerized Brinell Hardness Tester Model No. - KB-3000 (O) from Mumbai, India. Our Model 2 KB-3000 (0) is an electrically operated Hardness Testing machine, which is suitable for mass testing of components made of steel and other materials whether flat or round. Our Computerized Brinell Hardness Tester Model No. - KB-3000 (O) is accessible at very reasonable prices.

We are engaged in offering Brinell Hardness Testing Machine that is used for testing the hardness of metals and alloys. Our Brinell Hardness Testing Machine allows loading and unloading operation manually by durable operating lever. Salient Features Precisely designed as per BS: 240, IS: 2281-1968, and ASTM: E10.RB-3000Easy to operateDurableLess wear and tear Ideal For Measuring hardness of casting and forging of hard, soft, whether flat, round and irregular shapes metals and alloys

Motorised Rockwell Systems Hardness Testers - Model RASN (M)• Suitable for Rockwell Tests• Motorised for automatic operation cycie e load/unload• Preliminary Test Force - 98 07N (10kgf)• Addition. Test Force - 490.3, 882.6, 1373N  (150, 90, 140kgf)• Total Test Force - 588.4, 980.7, 1471N  Test force selection by external dialing, Auto zero setting dial gauge     Rockwell Systems Hardness Testers - Model RASN• Suitable for Rockwell Test• Manually Operated• Preliminary Test Force- 98.07, (10kgf)• Additional test force - 490.4, 882.6, 137N, (50, 90, 140 kgf)• Total Force Selection by external dailing• Auto zero setting dial gauge Rockwell Cum Brinell Testers - Model RASN (B)• Same as RASN above, in additional• Additional Test Force - 1471, 2354 N, (177.5, 250 kgf)• Total Test Force - 1839, 2452 N, (187.5, 250 kgf)     Rockwell cum Rockwell Superficial Hardness Testers - Model RASN (T)• Suitable for Rockwell & Rockwell superficial tests• Manually operated• Preliminary test force - 29.42, 98.07 N,  (3.10 kgf)• Additional test force - 177.7, 264.8, 411.9, 490.3, 882.8, 1373 N, (12.27, 42.50 & 140 kgf)• Total test force - 147.1, 294.2, 441.3, 588.4, 980.7, 147 N, (15, 30, 45, 60, 100, 150 kgf)• Auto zero setting dial gauge     Motorised Digital Hardness Testers - Model RASN (E)• Digital Hardness Tester for Rockwell tests• Motorised for automatic operation cycle ie. load / unload• Preliminary test force - 98.07 N, (10kgf)• Additional test force - 490.3, 882.6, 1373 N, (50, 90, 140 kgf)• Total test force - 588.4, 980.7, 1471 N, (60, 100, 150 kgf)• Test force selection by external dialing• Set position with LED bar indicator for easy operation• Key board entry through reliable membrane switches for scale / GO-NOGO/ dwell time selection• Large size scale display for easy reading with 0.1 Rockwell resolution• Parallel output for connection bot matrix printer to get result indication serial number of sets,   Hardness scale, Hardness value and high / good / low indication. 'MCS' new 'RASN' series of Hardness Testing Machines come with much improved design and look with following major design changesThe machine body is having a taper front look and a big size dial gauge in the front. The machine is powder coated for far better look. The paint shade do not fade and machine looks like new over year.The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height The accuracy is retained for years together due to hardened bushA hardened and ground stepped bush is fixed on top of main screw for location and test surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.An antifrication linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction This enables testing of small dia pin or ball upto 3 mm dia.All machine models are provided with automatic zero setting dial gauge or digital readout. Hence zero setting at every test is avoided.All four models confirm to respective standard as underIS:3804, BS 10109-2 & ASTM E-18 for Rockwen TestIS:5073 BS 10189-2 & ASTM E-18 for Rockwell Superficial TestIS:2281 BS 10003- 2 & ASTME - 10 for Brinell Test   Optional Accessories :• Steel Ball Indentor 1/8", 1/4", 1/2"• Testing Table 200mm dia• Testing Table 70mm dia with "V" groove for round jobs 10 to 80mm• Van -Rest to support odd shaped jobs• Jominy test fixture for end quench test• Gooseneck Adaptor No.1• Special Diamond lndentor suitable for Gooseneck Adaptor No.1• Short nib diamond lndentor suitable for Gooseneck Adaptor No.1• Gooseneck adaptor No.2• Special Diamond Cylinder anvil for testing by jobs above 20mm dia.• Everyball anvil with 25.4 dia or 38mm dia ball• Gooseneck anvil for pipes 5 to 25mm ID with 5mm step inserts• Jack rest for long and heavy jobs• Dot matrix Pnnter for Model RASN (E)  

• range: 1 kg. to 120 kg

These machines come in two basic versions.i.e.Pure Vickers and Vickers cum Brinell. Load range for pure Vickers is from 1 kg. to 120 kg and for Vickers cum Brinell, 1 kg to 250 kg. These machines are suitable for checking Vickers or Brinell Hardness of Steel and other metals. Loads are applied with dead weights and are selectable with push buttons. Measurement of Diagonal Diameter of indentation is done with the help of built in optical system with with built-in micrometer scale. After taking the indentation on work piece , objective lens is automatically swiveled in position and indentation image appears on the focussing screen fitted in front of the machine. Loading cycle is started with Push Button in the front where-as unloading is done manually by hand lever.

• Voltage: 440 V
• Country of Origin: Made in India
• Automation Grade: Automatic
• Frequency: 50 Hz
• Parameter: HB
• Display Type: Digital
• Corrosion Resistant: Yes
• Depth of Throat: 200 mm
• Maximum Depth of Elevating: 180 mm
• Phase: 3 Phase
• Size of Base: 370x670 mm
• Dimension: 4'x4'x5'
• Brand: Aitawade Industries
• Drive Type: Electric and Hydraulic
• Weight: 70 Kg

Hardness Test Block, Valves Guides, Valve Seats, brake wheel cylinders

hardness testing machines, hardness testing machine spares parts

SAROJ make Rockwell Hardness Testing Machines, hardness testing machines