Back Back
impact testing machines
Get Price Quote
We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India ) General Description The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.(It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into its position.
Pendulum Impact Testing Machine
90,000 - 400,000 Per
1 Set(s) (MOQ)
We are manufacturing as well as supplying Impact Testing Machine in India. Our Impact Testing Machine is designed for conducting Izod & Charpy test. The test method conforms to BS: 131: part 4 1972 (Amended 15 Aug – 1993) & BSEN: 10045 – 2: 1993.Constriction and functions of Impact Testing MachineThe Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen and is read form the maximum pointer on the dial scale.Controls of PendulumThe Pendulum supported in the starting position is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operated. Strikers & SupportsThere are two strikers & one combined support available for fitting into the pendulum & on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into its position.Optional Accessories Caliper gauge for checking V notch for Izod & Charpy as per BS: 131: Part 1, 2, 3 Depth notch gauge including V & U notch, angle & radius Self centering tong V – Notch milling cutter U – Notch milling cutter Charpy TestThe charpy test piece rests on alloy steel supports anvils. Fitted on the base of the machine rigidly held in position by allen screws. End stopper is provided for quickly & accurately loading the test piece centrally between the supports.Izod TestThe Izod test piece is clamped vertically in Izod support anvils, fitted on the base of the machine. The support is provided with a machined vertical groove to suite the test piece size. The front clamp piece & allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied. NOTE : DUE TO CONSTANT R&D SPECIFICATION AND FEATURES ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Best Deals from Impact Testers
AI-IT 30 Impact Testing Machine
Get Price Quote
1 piece (MOQ)
Impact Testing Machine
Get Price Quote
We make available Impact Testing Machine Model SE-IT 30, which is specifically designed for conducting Izod & Charpy Test. The test methods in the machine conform to BS: 131: PART 4-1972 (Amended 15 Aug. 1993) & BSEN: 10045 - 2: 1993. Impact Testing Machine is suitable for testing raw material specimen as well as finished components. Avail from us the Impact Testing Machine at market leading prices. Components & Working Of Impact Testing Machine Pendulum of the machine is mounted on antifriction bearings Contains two starting positions, the upper one for Charpy and the lower one for Izod testing The Pendulum on release swings down to break the specimen and the power absorbed in doing so is calculated as the variation between the height of drop before rupture & height of raise after rupture of the test specimen The output is read from the maximum pointer on the dial scale Offered With Self centering tong V - notch milling cutter U - notch milling cutter Caliper gauge for checking V notch for Izod & Charpy as per BS: 131 :PART 1, 2, 3 Depth notch gauge including V & U notch, angle & radius Controls of Pendulum The Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated.
Motorized Impact Testing Machine
Get Price Quote
1 Piece (MOQ)
Features Capacity: Charpy 300J / Izod: 178J Motorized Lifting operation of pendulum Hammer so there is no strain & fatigue to the operator while lifting the pendulum hammer frequently. Only one operator can operate the machine easily & rapidly. To stop the pendulum swing solenoid Magnetic Brake is provided. To prevent accident large safety guard with openable doors & with an interlocking system is provided for complete safety. A transparent acrylic glass sheet is fitted to safeguard. Machine conforms to ASTM-E 23, BSEN ISO 148 & IS standards (for IZOD & Charpy scales). Total Maintenance-free Impact Machine. Higher capacity 500, 600,750 Joules impact machines are also available. The pendulum Impact Tester of all the above models are designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : part 4-1972 (amended 15 Aug. 1993)BSEN : 10045-2 : 1993 & ASTM : E-23-94a. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen, and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on Digital Panel in case of digital models) Controls of Pendulum: The Pendulum supports in the starting positions is by a self-resetting latch. The release mechanism is operated by a lever. The pendulum release latch is operated only when this lever is operated Strikers & Supports: There are two strikers and one combined support available for lifting into the pendulum and on to the base of the machine for Izod., Charpy test, changing from one striker to another is achieved simply by fixing the new striker into its position. CHARPY TEST: The Charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by Allen screws. The end stopper is provided for quickly and accurately locating the test piece centrally between the supports. IZOD TEST: The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece incorrect height with the help of the Izod setting gauge supplied. MODEL ME-ASTM-E-23-M This impact tester offered with 300J energy exclusively for the Charpy test confirming to ASTM- E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied by the NIST, USA. All two sets of the five specimens must agree with the normal values within certain tolerance specified. OPTIONAL ACCESSORIES Caliper gauge for checking V notch for Izod & Charpy Templates for checking 10 x 10 mm cross-section of Izod / Charpy test specimen Depth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle and radius Self-centering tong for quick and accurate setting of Charpy test specimen ‘V’ notch milling cutter ‘U’ notch milling cutter
Digital Impact Testing Machine RI 300 E
Get Price Quote
1 piece (MOQ)
Since the inception of our firm, we are offering a quality assured array of Digital Impact Testing Machine. Description: Electronic digital display Simple construction of pendulum izod so that izod or charpy machine, machine can build at sight Interchangeable stickers for izod & charpy positions Positive pendulum lock in izod & charpy positions Safety guard for protection A braking arrangement for stopping the pendulum Optional printer interface Technical Specification And Features: Suitable for Charpy & Izod Impact tests on various materials. Works on Pendulum principle. Rigid designs of machine frame & other parts assure minimum energy absorption during fracture which results in improved test accuracies. The highly stressed & wearing parts like support blocks & strikers are of special alloy steels duly heat treated. Safety guard for the operator is provided. Initial potential energy for Charpy is 300 Joules & for Izod is 170 Joules with a resolution of 0.5 Joules Pendulum drop angle for Charpy is 140° & for Izod is 90°. Optional Accessories: Caliper gauge for checking V notch for Izod & Charpy. Templates for checking 10 x 10 mm cross section of Izod / Charpy test specimen. Depth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radius. Izod support for 0.450" dia Izod round specimen. Self centering tong for quick and accurate setting of Charpy test specimen. ''V'' notch milling cutter. Additional Information: Item Code: RI-300E
Pendulum Impact Tester (Model - IT 30 )
Get Price Quote
1 Piece (MOQ)
The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS:131:PART 4-1972 (Amended 15 Aug. 1993) BSEN:10045-2:1993. The pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy the lower one for Izod testing. On release, the pendulum swings down to break the specimen & the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines). There are two strikers and one combined support anvil available for fitting in to the pendulum and on the base of machine for the Izod, Charpy test respectively. Changing from one striker to another is achieved simply by fixing the new striker into it’s position. CHARPY TEST The Charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports. IZOD TEST The Izod Test piece is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied. Optional accessories Self centering tong for quick and accurate setting of Charpy test specimen ‘V’ notch milling cutter. Caliper gauge checking V notch for Izod & Charpy. ‘U’ notch milling cutter. Templates for checking 10x10mm. Cross section of Izod/Charpy test specimen. Depth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radius. Standard Accessories Izod Striker Charpy Striker Anvil Spanner Set Manual
Digital Impact Testing Machine
90,000 - 400,000 Per Piece
1 Piece (MOQ)
We offer Digital Impact Testing Machine. SHRI RAM INDUSTRIES The Pendulum Impact Tester Model SRI - IT 30 (E) is designed for conduction Izod & Charpy Test. The test methods confirm to BS:131:PART 4-1972 (Amended 15 Aug. 1993) & BSEN: 10045 - 2 :1993. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the Pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after repture of the test specimenn and is read from Digital Panel.
Pendulum Impact Testing Machine
Get Price Quote
The company is a major Manufacturer, Exporter & Supplier of Pendulum Impact Testing Machines. Manufactured as per the BSEN standard, the Pendulum Impact Testing Machines are available in the electronic models and can be customized as well. The Pendulum Impact Testing Machine is known for their remarkable efficiency as well as consistent accuracy. Optional Accessories Caliper gauge for checking V notch for Izod & CharpyTemplates for checking 10 x 10mm. cross section of Izod/ Charpy test specimenDepth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radiusY Izod support for 0.450" diameter Izod round specimenSelf centering tong for quick and accurate setting of Charpy test specimenV notch milling cutterIT notch milling cutter
impact testing machines
Get Price Quote
he pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines.) There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into it’s position.
Digital Impact Testing Machine
Get Price Quote
Buyers can avail themselves of high-performance Digital Impact Testing Machine at best prices from us! We are one of the eminent Manufacturers and Suppliers of Digital Impact Testing Machine in Maharashtra. We fabricate these machines to perform Izod and Charpy tests. The methodologies adopted to conduct these tests adhere to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993. Working : The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to break the specimen and the energy absorbed in doing so, is measured as the difference between the heights of drop before the rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on the digital readout in case of electronic machines.) There are two strikers and one combined support available for fitting in to the pendulum and onto the base of the machine for the Izod, Charpy test respectively. Changing from one striker to another is achieved simply by fixing the new striker into its position. Optional Accessories : Caliper gauge for checking V notch for Izod & Charpy. Templates for checking 10 x 10 mm cross section of Izod / Charpy test specimen Depth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle and radius. Self centering tong for quick and accurate setting of Charpy test specimen. 'V' notch milling cutter 'U' notch milling cutter
Impact Testing Machine
Get Price Quote
Shree Krupa Industries is a well reputed Impact Testing Machines manufacturers and suppliers from Ichalkaranji, Maharashtra. We offer highly precise impact testing machines that can measure strength and resistively to impact. Complies To BS : 131 : part 4-1972 (amended 15 Aug. 1993) BSEN : 10045-2 : 1993 ASTM: E-23-94a standards. Applications Engineering firms Construction industry Oil & Gas sector
impact testing machines
Get Price Quote
Impact Testing Machine
Get Price Quote
We are a reliable manufacturer and supplier of Impact Testing Machines in India. Our Impact Testing Machine is designed for conducting Izod & Charpy test. The test method conforms to BS: 131: part 4 1972 (Amended 15 Aug 1993) & BSEN: 10045 2: 1993. Working of Impact Testing Machine The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen; the measurement is read from the maximum pointer on the dial scale. Controls of Pendulum The Pendulum is supported in the starting position is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch moves only when this lever is operated. Strikers & Supports There are two strikers & one combined support available for fitting into the pendulum & on to the base of the machine for Izod, or Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into its position. Optional Accessories In Impact Testing Machine Caliper gauge for checking V notch for Izod & Charpy as per BS: 131: Part 1, 2, 3 Depth notch gauge including V & U notch, angle & radius Self centering tong V Notch milling cutter U Notch milling cutter Charpy Test The sample to be tested is kept on support anvils that are typically made from Ally Steel. These anvils are fitted on the base of the machine. There is also an end stopper that holds the sample in a central position between the support anvils. Izod Test The Izod test piece is clamped vertically in Izod support anvils, fitted at the foot of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece & allen screw enable clamping of the test piece at correct height with the help of Izod setting gauge.
Pendulum Impact Testing Machine
150,000 Per Piece
Digital Impact Testing Machine
180,000 Per unit
5 unit (MOQ)
impact testing machines
Get Price Quote
it - 30 - suitable for izod and charpy tests as per is-1598, 1757, 1499 & 3766 and bs:131 parts 1, 2, 3 & 4. mit-1.4- suitable for izod tests on non-ferrous metals. Plastic materials, frp etc. mit-0.42- suitable for izod tests on plastic, wooden frp, glass, ceramic specimen and check adhesive property of bounded material etc. various models - max load capacity from 6 to 50 tone. loading accuracy well within +- 1%
Digital Impact Testing Machine-02
Get Price Quote
Digital Impact Testing Machine is engineered by the team of technical experts ensuring complete precision. Our Digital Impact Testing Machine is widely used in numerous industrial applications for the accurate measurements of digital impacts. Model : Mech.CS.IT-30(D) Functions : Conduct IZOD, CHARPY TestConfirm following standardsBS: 131: part 4-1972 (amended 15 Aug. 1993)BSEN : 10045-2: 1993ASTM : E-23-94aRelease pendulum swings down to brake the specimenAbsorbed energy so that the measures can be read in between the height of drop before ruptureHeight of increase after rupture of the test specimenMaximum pointer position on the dial scale (It is read on Digital Panel in case of digital models) Accessories : Pendulum is mounted on antifriction bearingsTwo starting positions :Upper one for CHARPYLower one for IZOD TestingControls of Pendulum :supports in the starting positions is by a self resetting latchRelease mechanism is operated by leverStrikers & Supports :Two strikers and one combined supportLift it into the pendulumBase of the machine for IZOD & CHARPY testChange from one striker to another is achieved simply by fixing the new striker into it's positionCaliper gauge for checking V notch for IZOD & CHARPYTemplates for checking 10 x 10 mm cross section of IZOD / CHARPY Test SpecimenDepth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle, and radiusSelf-centering tong for quick and accurate setting of CHARPY Test Specimen'V' notch milling cutter'U' notch milling cutter
Impact Testing Machine
Get Price Quote
We are identified as one of reputed Impact Testing Machine Suppliers in the national market. Our Impact Testing Machine is designed with utmost precision to conduct Izod & Charpy Test. The Impact Testing Machine, offered by us is ideal to test the resistance of metal and various other alloys to external impacts. General Description Our highly efficient Pendulum Impact Tester Model MCS-IT 30 is developed for conduction Charpy and Izod Test. Herein, the test methods comply with BS: 131: PART 4-1972 (Amended 15 Aug. 1993) and BSEN: 10045 - 2: 1993. The Pendulum Mounted on friction resistance bearings, the pendulum has two starting positions. The lower position is for Izod and the upper one is for Charpy Testing. When released, the pendulum swings down breaking specimen and rendering energy that is absorbed, which is measured as the difference between the height of drop before and after rupture as the test specimen. This is notified from the maximum pointer on the dial scale. Izod Test The Izod test piece is fixed upright in Izod support anvils, fixed on the lower part of the machine. Herein, the support is given with machined vertical groove that suits the test piece size. The alien screw and front clamp piece empowers fixing test piece on precise height by the help of Izod setting gauge. Charpy Test The Charpy test piece relaxes on alloy steel that supports anvils fixed on the base of the machine that stiffly held in position through alien screws. Herein, the end stopper available for precise and quick placing of test piece in between the supports. Controls of Pendulum The Pendulum supported in the starting positions is by a self-resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated. Strikers & Supporters Apart from strikers, there is one combined support that is provided for fixing to the base of the machine for Charpy and Izod Tests and Pendulum. New striker is fixed in to its position to achieve charging. Optional Accessories Available U - notch milling cutterV - notch milling cutterCaliper gauge for checking V notch for Charpy and Izod according to BS:131 :PART 1, 2, 3Depth notch gauge that includes V & U notch, radius and angleSelf-centering tong
impact testing machines
Get Price Quote
The company is a prominent Manufacturer, Exporter and Supplier of Impact Testing Machines around the globe. We have a wide gamut of Impact Testing Machines to offer that are highly reliable and durable. Made using optimum raw materials and components, our Impact Testing Machines are precisely designed under the supervision of experts. We offer the best deal to avail our Impact Testing Machines.
Digital Impact Testing Machine
Get Price Quote
The pendulum is mounted on antifriction bearing. It has two starting positions, for Charpy test pendulum swings down to breack the specimen and the enery absorbed in the specimen is between height of drop before rupture and the height of rise after rupture of test specimen. The reading is shown on dial scale from maximum pointer positon. MCS has developed electronic model MIT - 30 (E) microprocessor based panel with digital display. The reading is directly available on digital display. It aslo provided printer interface.
impact testing machines
Get Price Quote
The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 & ASTM : E-23-94a. The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into it's position. The charpy test piece rests on alloy steel support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.
Impact Testing Machine
Get Price Quote
The need to carry out hassle-free Charpy Test and Izod Test is met once this Impact Testing Machine is purchased. We offer the Impact Testing Machine at competitive rates to clients. These Impact Testing Machines are available in diverse specifications and ensure that these tests are performed accurately. The Test Methods Confirm To : BS : 131 : PART 4 - 1972 (Amended 15 Aug - 1993) & BSEN : 10045 - 2 : 1993 Construction : The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen and is read form the maximum pointer on the dial scale. Strikers & Supports : There are two strikers & one combined support available for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing form one striker to another is achieved simply by fixing the new striker into its position. Working : Controls of Pendulum : The Pendulum supported in the starting position is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operated. Optional Accessories : Caliper gauge for checking V notch for Izod & Charpy as per BS : 131 :PART1, 2 and 3 Depth notch gauge including V&U notch, angle & radiusPreliminary Test force 29.42, 98.07 N 3, 10KgF Self centering tong V-notch milling cutter U-notch milling cutter How The Tests Are Performed? Charpy Test : In this test, the specimen is put on the Alloy Steel Support Anvils that are firmly fixed on base of machine. The anvils are held together by alien screws. Also, the end stopper is provided to accurately and quickly locate the test specimen in a central location between the supports. Izod Test : The Izod Test Specimen is clamped in a vertical position on support anvils. These anvils are fitted on base of the machinery. Further, this support is supplied with a machined vertical groove that suits the size of the test specimen. The front clamp piece as well as alien screw enables correct clamping of test piece in an accurate height : such correct clamping is done with the help of Izod setting gauge. Range Impact Testing Machine - Heavy Base - Model - AI - IT - 30Impact Testing Machine - Light Base - Model - AI - IT - 30Impact Testing Machine - Digital - Model - AI - IT - 30Impact Testing Machine - ASTM -With NIST Samples - Model - AI - IT - 30 - ASTMImpact Testing Machine - ASTM -Without NIST SamplES - Model - AI - IT - 30 - ASTM
DROP WEIGHT IMPACT TESTING MACHINE
290,000 Per Piece
Plastic Impact Testers.
Get Price Quote
Plastic Impact Testers. Most suitable for polymers and similar materials. Calibrated as per BS standard
Impact Testing Machine
Get Price Quote
Another variety that we bring forth to our esteemed buyers is an Impact Testing Machine. Having expertise in this field, we are counted among the leading names for manufacturing & supplying Impact Testing Machine from Maharashtra, India. We have a team of quality controllers that makes use of the quality-tested basic material and advanced techniques for manufacturing these machines. We priced our Impact Testing Machines so well that buyers can easily afford them.
Impact Testing Machine
Get Price Quote
extensometer
Impact Testing Machine
Get Price Quote
Rockwell Testing Machine
Automatic Impact Testing Machine
Get Price Quote
Automatic Impact Testing Machine, Electrical Universal Testing Machine
