Impact Testing Machine Dealers in Kolhapur

• Weight: 100-200kg, 200-300kg
• Voltage: 220V
• Automation Grade: Automatic
• Driven Type: Electric
• Type: Polished
• Color: Multi Colour
• Application: Industrial Use
• Power: 1-3kw, 3-6kw
• Warranty: 1year

Shree Krupa Industries is a well reputed Impact Testing Machines manufacturers and suppliers from Ichalkaranji, Maharashtra. We offer highly precise impact testing machines that can measure strength and resistively to impact. Complies To BS : 131 : part 4-1972 (amended 15 Aug. 1993) BSEN : 10045-2 : 1993 ASTM: E-23-94a standards. Applications Engineering firms Construction industry Oil & Gas sector  

• Weight: 68 kg
• Minimum Scale Graduation: 0.5 J
• Overall Size (Approx.): 1.65 m x 0.45 mx
• Net Weight (Approx.): 375 Kg.
• Power consumption: 100W
• Power Supply: 110V/220V

We are manufacturing as well as supplying Impact Testing Machine in India. Our Impact Testing Machine is designed for conducting Izod & Charpy test. The test method conforms to BS: 131: part 4 1972 (Amended 15 Aug – 1993) & BSEN: 10045 – 2: 1993.Details : Constriction and functions of Impact Testing Machine - The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen and is read form the maximum pointer on the dial scale. Controls of Pendulum - The Pendulum supported in the starting position is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operated. Strikers & Supports - There are two strikers & one combined support available for fitting into the pendulum & on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into its position. Charpy Test - The charpy test piece rests on alloy steel supports anvils. Fitted on the base of the machine rigidly held in position by allen screws. End stopper is provided for quickly & accurately loading the test piece centrally between the supports. Izod Test - The Izod test piece is clamped vertically in Izod support anvils, fitted on the base of the machine. The support is provided with a machined vertical groove to suite the test piece size. The front clamp piece & allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied. Optional Accessories : Caliper gauge for checking V notch for Izod & Charpy as per BS: 131: Part 1, 2, 3 Depth notch gauge including V & U notch, angle & radius Self centering tong V – Notch milling cutter U – Notch milling cutter

• Pendulum Impact Energy: 300J (Charpy Test) & 168 J for IZOD Test
• Scale Graduation: 2 J
• Pendulum Drop Angle: (140 Degree for Charpy Test) & (90 Degree for IZOD Test)
• Usage: Industrial
• Striking Velocity of Pendulum: 2.45 m/sec for Charpy Test & 3.857 m/sec for Izod TestMin
•  :  

• Weight: 375 Kg
• Product Type: Impact Testing Machine
• Display Type: Analog
• Initial Potential Energy for Charpy: 300 Joules
• Initial Potential Energy for Izod: 168 Joules
• Least Count: 2 Joules
• Pendulum drop angle for Charpy: 140 Degree
• Pendulum drop angle for Izod: 90 Degree

The company is a major Manufacturer, Exporter & Supplier of Pendulum Impact Testing Machines. Manufactured as per the BSEN standard, the Pendulum Impact Testing Machines are available in the electronic models and can be customized as well. The Pendulum Impact Testing Machine is known for their remarkable efficiency as well as consistent accuracy. Optional Accessories Caliper gauge for checking V notch for Izod & CharpyTemplates for checking 10 x 10mm. cross section of Izod/ Charpy test specimenDepth notch gauge including V & U notch gauges for checking depth below V/U notch, angle and radiusY Izod support for 0.450" diameter Izod round specimenSelf centering tong for quick and accurate setting of Charpy test specimenV notch milling cutterIT notch milling cutter

• Weight: 60KG
• Display Type: Digital
• Automation Grade: Semi-Automatic
• Capacity: 1J, 2.75J, 5.5J, 11J, 22J
• Supply: AC
• Voltage (V): 220

We are a reliable manufacturer and supplier of Impact Testing Machines in India. Our Impact Testing Machine is designed for conducting Izod & Charpy test. The test method conforms to BS: 131: part 4 1972 (Amended 15 Aug 1993) & BSEN: 10045 2: 1993. Working of Impact Testing Machine The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swings down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen; the measurement is read from the maximum pointer on the dial scale. Controls of Pendulum The Pendulum is supported in the starting position is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch moves only when this lever is operated. Strikers & Supports There are two strikers & one combined support available for fitting into the pendulum & on to the base of the machine for Izod, or Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into its position. Optional Accessories In Impact Testing Machine Caliper gauge for checking V notch for Izod & Charpy as per BS: 131: Part 1, 2, 3 Depth notch gauge including V & U notch, angle & radius Self centering tong V Notch milling cutter U Notch milling cutter Charpy Test The sample to be tested is kept on support anvils that are typically made from Ally Steel. These anvils are fitted on the base of the machine. There is also an end stopper that holds the sample in a central position between the support anvils. Izod Test The Izod test piece is clamped vertically in Izod support anvils, fitted at the foot of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece & allen screw enable clamping of the test piece at correct height with the help of Izod setting gauge.

• Brand Name: ARUN MAKE
• Model Number: AI-ITM

The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to  BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines.) There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into it's position.

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )   General Description The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.(It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into its position.

• Automation Grade: Automatic
• Brand Name: Ratnakar
• Item Code: RI-300E
• Product Type: Impact Testing Machine
• Model Name/Number: RI 300 E
• Feature: Highly Durable
• Usage: Industrial

• Material: Mild Steel
• Automation Grade: Automatic

We are identified as one of reputed Impact Testing Machine Suppliers in the national market. Our Impact Testing Machine is designed with utmost precision to conduct Izod & Charpy Test. The Impact Testing Machine, offered by us is ideal to test the resistance of metal and various other alloys to external impacts. General Description Our highly efficient Pendulum Impact Tester Model MCS-IT 30 is developed for conduction Charpy and Izod Test. Herein, the test methods comply with BS: 131: PART 4-1972 (Amended 15 Aug. 1993) and BSEN: 10045 - 2: 1993. The Pendulum Mounted on friction resistance bearings, the pendulum has two starting positions. The lower position is for Izod and the upper one is for Charpy Testing. When released, the pendulum swings down breaking specimen and rendering energy that is absorbed, which is measured as the difference between the height of drop before and after rupture as the test specimen. This is notified from the maximum pointer on the dial scale. Izod Test The Izod test piece is fixed upright in Izod support anvils, fixed on the lower part of the machine. Herein, the support is given with machined vertical groove that suits the test piece size. The alien screw and front clamp piece empowers fixing test piece on precise height by the help of Izod setting gauge. Charpy Test The Charpy test piece relaxes on alloy steel that supports anvils fixed on the base of the machine that stiffly held in position through alien screws. Herein, the end stopper available for precise and quick placing of test piece in between the supports. Controls of Pendulum The Pendulum supported in the starting positions is by a self-resetting latch. The release mechanism is operated by lever. The Pendulum release latch is operated only when this lever is operated. Strikers & Supporters Apart from strikers, there is one combined support that is provided for fixing to the base of the machine for Charpy and Izod Tests and Pendulum. New striker is fixed in to its position to achieve charging. Optional Accessories Available U - notch milling cutterV - notch milling cutterCaliper gauge for checking V notch for Charpy and Izod according to BS:131 :PART 1, 2, 3Depth notch gauge that includes V & U notch, radius and angleSelf-centering tong

General Description: The pendulum Impact Tester Model Mech.CS.DITASTM is designed for conducting izod, Charpy test. The test methods confirm to BS : 131 : part 4-1972 (amended 15 Aug. 1993)BSEN : 10045-2 : 1993 & ASTM : E-23-94a.The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on Digital Panel in case of digital models) Controls of Pendulum: The Pendulum supports in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operated Strikers & Supports: There are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for Izod., Charpy test, Changing from one striker to another is achieved simply by fixing the new striker into it's position. CHARPY TEST: The Charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports. MODEL Mech.CS.DITASTM This impact tester offered with 300J energy exclusively for Charpy test confirming to ASTM- E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard. The accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied the NIST, USA. All two sets of the five specimen must agree with the normal values within certain tolerance specified.  OPTIONAL ACCESSORIES Caliper gauge for checking V notch for Izod & Charpy. Templates for checking 10 x 10 mm cross section of Izod / Charpy test specimen Depth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle and radius. Self centering tong for quick and accurate setting of Charpy test specimen. 'V' notch milling cutter 'U' notch milling cutter Model Mech.CS.DITASTM Maximum capacity 300J Min Scale Graduation 2J Overall Size (Appx) 1.4m x 0.5 m x 1.9m (H) Net Weight (Appx) 450 kg

General Discription :MCS make Pendulum type Imapct Testing Machine Model MIT-30 is designed fro conducting Izod & Charpy test. The test confirms to BS:131: PART IV 1972 (1993) BSEN:1993The pendulum is mounted on antifriction bearing. It has two starting positions, for Charpy test pendulum swings down to breack the specimen and the enery absorbed in the specimen is between height of drop before rupture and the height of rise after rupture of test specimen. The reading is shown on dial scale from maximum pointer positon. MCS has developed electronic model MIT - 30 (E) microprocessor based panel with digital display. The reading is directly available on digital display. It aslo provided printer interface.There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achieved simply by fixing the new striker into it's position.   Charpy Test :The charpy test piece rests alloy steel support anvils, fitted on the base of the machine rigidly held in position by allen screw End stopper is provided for quickly and accurately locating the test piece centrally between the supportsIZOD Test :The izod test piece is clamped vertically in izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece & the Allen screw enable clamping of the test piece incorrect height with the help of izod setting gauge supplied.Model : MIT - 30 (ASTM)The impact tester offered with 300 J energy exclusively for Charpy test confirming to ASTM E-23. This machine is geometrically checked in the works to the more stringent requirements of the American standard the accuracy of the machine is then verified by PROOF TEST by testing standard test specimens supplied by the NIST, USA. All two sets of the live specimen must agree with the normal values within certain tolerance specified.   Optional Accessories for MIT 30 / MIT 30 E :Izod support for 0.450" dia Izod round specimen. Self centering long quick and accurate setting of Charpy test sepcimen"V" notch milling cutter"U" notch milling cutterCaliper gauge for checking V notch for Izod & Charpy Templates for checking 10 X 10 mm, corss section of Izod / Charpy test sepcimen Depth notch V & U notch gauge for checking depth below V / U notch angle and radius.

The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.

General Description :       The pendulum Impact Tester Model IT 30 is designed for conducting izod, Charpy test. The test methods confirm to  BS : 131 : part 4-1972 (amended 15 Aug. 1993) BSEN : 10045-2 : 1993 & ASTM : E-23-94a.     The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on digital readout in case of electronic machines.)     There are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for Izod., Charpy test, Changing from one striker to another is achieved simply by fixing the new striker into it's position.   The charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.      

• Material: Mild Steel
• Voltage: 220 V
• Phase: Single Phase
• Automation Grade: Semi-Automatic
• Frequency: 50/60 Hz
• Weight: 380 Kg
• Power Source: Electricity
• Country of Origin: Made in India
• Brand: Aitawade Industries
• Supply: AC
• Warranty: 1 Year
• Capacity: 300 KN
• Display Type: Analog

The need to carry out hassle-free Charpy Test and Izod Test is met once this Impact Testing Machine is purchased. We offer the Impact Testing Machine at competitive rates to clients. These Impact Testing Machines are available in diverse specifications and ensure that these tests are performed accurately. The Test Methods Confirm To : BS : 131 : PART 4 - 1972 (Amended 15 Aug - 1993) & BSEN : 10045 - 2 : 1993 Construction : The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy and the lower one for Izod testing. On release, the pendulum swing down to break the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture & height of raise after rupture of the test specimen and is read form the maximum pointer on the dial scale. Strikers & Supports : There are two strikers & one combined support available for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing form one striker to another is achieved simply by fixing the new striker into its position. Working : Controls of Pendulum : The Pendulum supported in the starting position is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operated. Optional Accessories : Caliper gauge for checking V notch for Izod & Charpy as per BS : 131 :PART1, 2 and 3 Depth notch gauge including V&U notch, angle & radiusPreliminary Test force 29.42, 98.07 N 3, 10KgF Self centering tong V-notch milling cutter U-notch milling cutter How The Tests Are Performed? Charpy Test : In this test, the specimen is put on the Alloy Steel Support Anvils that are firmly fixed on base of machine. The anvils are held together by alien screws. Also, the end stopper is provided to accurately and quickly locate the test specimen in a central location between the supports. Izod Test : The Izod Test Specimen is clamped in a vertical position on support anvils. These anvils are fitted on base of the machinery. Further, this support is supplied with a machined vertical groove that suits the size of the test specimen. The front clamp piece as well as alien screw enables correct clamping of test piece in an accurate height : such correct clamping is done with the help of Izod setting gauge. Range Impact Testing Machine - Heavy Base - Model - AI - IT - 30Impact Testing Machine - Light Base - Model - AI - IT - 30Impact Testing Machine - Digital - Model - AI - IT - 30Impact Testing Machine - ASTM -With NIST Samples - Model - AI - IT - 30 - ASTMImpact Testing Machine - ASTM -Without NIST SamplES - Model - AI - IT - 30 - ASTM

• Weight: 100-200kg
• Material: Metal
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant
• Application: Industrial

Another variety that we bring forth to our esteemed buyers is an Impact Testing Machine. Having expertise in this field, we are counted among the leading names for manufacturing & supplying Impact Testing Machine from Maharashtra, India. We have a team of quality controllers that makes use of the quality-tested basic material and advanced techniques for manufacturing these machines. We priced our Impact Testing Machines so well that buyers can easily afford them.

Another variety that we bring forth to our esteemed buyers is an Impact Testing Machine. Having expertise in this field, we are counted among the leading names for manufacturing & supplying Impact Testing Machine from Maharashtra, India. We have a team of quality controllers that makes use of the quality-tested basic material and advanced techniques for manufacturing these machines. We priced our Impact Testing Machines so well that buyers can easily afford them.

• Suitable for: zod and Charpy tests
• Max load capacity: 6 to 50 Tone
• Loading accuracy: within ± 1%

The Pendulum Impact Tester Model - It30 is designed for conducting Izod & Charpy test The test methods confirm to BS-131:PART 4 - 1972 (Amended 15 Aug - 1993) & BSEN : 10045 - 2 : 1993.The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for charpy and the lower one for Izod testing On release, the pendulum swings down to break the speciment and the energy absorved indoing so is measured as the differnece between the height of drop before rupture & height of raise after rupyture of the test specimen and is read from the maximum pointer on the dial scale.The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for charpy and the lower one for Izod testing On release, the pendulum swings down to break the speciment and the energy absorved indoing so is measured as the differnece between the height of drop before rupture & height of raise after rupyture of the test specimen and is read from the maximum pointer on the dial scale. Controls of Pendulum :The Pendulum supported in the starting positions is by a self resetting latch. The release mechanism is operated by lever The pendulum release latch is operated only when this lever isoperated. Sirikers & Supports :There are two strikers & one combined support availabel for fitting into the Pendulum & on to the base of the machine for Izod, Charpy test. Changing from one striker to another is achived simply by fixing the new striker into its positions. Optional Accessoris : Caliper gauge for checking V notch for Izod Charpy as per BS : 131 : PART 1,2,3. Depth notch gauge including V&U notch, angle & radius. Self centering tong. V-notch miling cutter. U-notch miling cutter. Charpy Test :The Charpy test piece rests on alloy steel supports anvils. Fitted on the base of the machine rigidly held in position by allen screws. End stopper is provided for quickly & accurately loading the test piece centrally between the supports. Izod Test :The Izod test piece is clamped vertically in Izod support anvils, fitted on the base of the machine. The support is provided with a achined vertical groove to suit the test piece size. The front clamp piece & allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.

• MODEL NOS: MIT-30, MIT-1.4 MIT-0.42

  it - 30 - suitable for izod and charpy tests as per is-1598, 1757, 1499 & 3766 and bs:131 parts 1, 2, 3 & 4. mit-1.4- suitable for izod tests on non-ferrous metals. Plastic materials, frp etc. mit-0.42- suitable for izod tests on plastic, wooden frp, glass, ceramic specimen and check adhesive property of bounded material etc. various models - max load capacity from 6 to 50 tone. loading accuracy well within +- 1%

plastic impact testing machines, auto testing machines