Industrial Bearing Dealers in Kolhapur

We are India sales partner of Shilla Corporation Korea, world’s leading slewing ring bearing manufacturer. We supply precision slewing ring bearings for applications like Earth moving machines, Stacker reclaimers, Windmills, Ship cranes, Dock cranes, tower cranes, Tunnel boring machines, Defense equipment, RADARs and many more.

• Country of Origin: India
• Type: Eccentric Bearings
• Finishing: Coated
• Automatic Grade: Manual

We are one of the famous company, who are manufacturer of eccentric.

Needle roller bearings can be considered a version of cylindrical roller bearings. As these small-sized bearings can take over heavy dynamic loads, they provide high stiffness in bearing units. Needle roller bearings are manufactured in the follow-ing constructive versions: Needle roller bearings with inner ring In case of limited space needle roller bearings without inner rings (RNA type) can be used instead of needle roller bearings with inner rings. The shaft must be har-dened and ground. The shaft raceway must have a hardness of 58…65 HRC and a minimum roughness Ra = 0,2 ?m for normal bearings. In case of less pretentious bearings, Ra = 0,3 ?m is allowed. Minimum thickness of the case-hardened layer can be determined as a function of the rolling element diameter, using the equation: tmin = (0,07…0,12)Dw, mm where: Dw = rolling element diameter, mm Greater values are valid in case of materials with core low strength and heavy loads. In case of heat treatment steels (e.g. 41 MoCM 1) which have been surface hardened and tempered, layer thick-ness can be calculated using the equation: tmin = (0,1…0,15)Dw, mm where: Dw = rolling element diameter, mm Layer thickness after grinding must be of minimum 0,3 mm. If the hardness of the surface layer is less than 58 HRC, bearing cannot accommodate the initial basic dynamic load Cr and basic static load Cor, respectively. In this case, basic dynamic load will be decreased by factor fH and basic static load by factor foH, according to the equations: Cr ef = fH Cr, kN C0r ef = f0H C0r, kN Factors fH and f0H are given in table 1.   The dimensions of needle roller bearings are stand-ardized only for dimension series NA48, NA49, NA69, in accordance with ISO 1206. Tolerances Needle roller bearings with one-piece rings are general-ly manufactured to the normal tolerance class (P0). At request, they can be manufactured to other tolerance classes (P6 and P5). The values of tolerances are given in chapter 3 on page 24. Radial clearance Needle roller bearings with one-piece rings are general-ly manufactured with normal radial clearances and the values of clearance are the same with those of the cylindrical roller bearings, according to ISO 5753 and are given on page 159, table 2. At request, these bearingsare manufactured with other clearances (C2, C3 or C4). If needle roller bearings are to be matched in pairs, radial clearance should be the same for both bearings so that loads should be uniformly distributed. Cages Needle roller bearings with one-piece rings are generally fitted with pressed sheet cages. At special request, when bearings are to be operated at high speeds and/or under heavy loads, machined steel cages are recommended to be used. Glass fibre reinforced polyamide 6.6 cages are also successfully used up to an operating temperature of+ 120?C. ??Cage design and some technical data are given intable2.   Fits ??Needle roller bearings are generally mounted with in-terference fits so that rings should not get deformed due to their low section. In case of large-sized bearings, heavy loads and shock loads, bearings are more tightly mounted. When determining the fit, the difference of temperature between the inner ring and the outer ring, respectively, should be considered. The manufacturing tolerance of the shaft should be in the tolerance class 6 (IT6) and of the housing in the tolerance class 7 (IT7). In case of bearings manufactured to more accurate tolerance classes, the manufacturing tolerance of the shaft should be in the tolerance class 5 (IT5 ) and of the housing in the tolerance class 6 (IT6). These classes are also compulsory for the raceway on shaft. Deviations of form and position should be in accordance with the stipulations on page 57. ??The shaft tolerances are given in table3. They depend on the radial clearance necessary for needle roller bearings without inner ringswhich are mounted into the housing, the housing bore being manufactured to the tolerance class K6.    

We are offering all types skf bearing range availble & taper roller , boll bearing , all material stock with excise gat pass material.

We Provide a Large Range of Bearing that is Available in Varied Sizes and Dimensions. Our Bearings are Manufactured from the 100 % Steel that Makes the Range Durable. Excellent Dimensional Tolerance, Perfect Finish and High Performance are Some of the Unique Features of Our Bearings. We have Carved a Niche as One of the Ecstatic Conveying Bearing Exporters, Based in India.

These Turbocharger Thrust Collars have face groove, O.D. groove and 16 oil holes. Our Turbocharger Thrust Collar is manufactured from high quality steel 8620 or 4140 material. Our Turbocharger Thrust Collars are designed as per customers’ specification in order to meet their requirements. Our Turbocharger Thrust Collar has perfect finish obtained after heat treatment up to 40 to 45 HRC. The dimension of our Turbocharger Thrust Collar is accurately maintained including concentricity, perpendicularity and parallelism. By offering customized designs of Turbocharger Thrust Collar, we always give the customer exactly what they need. Attributes Accurate dimensionDurableExcellent finishing

We are offering a wide range of Stainless Steel Bearings to our widespread clientele. The complete assortment of Stainless Steel Bearings offered by us is exclusively made by using high grade Stainless Steel, as a raw material, procured from most trusted vendors of the country.

Manufacturing Various Type Of Rubber Rollers By Us For Textile Cotton & Silk Cloth Process & Denim Process Machines.

• Application: Printing machine, Textile machine, Heavy earth moving machine
• Features: Self lubricating, Anti-abrasion, Low-friction

We present you with superior quality Rubber Gaskets. These Rubber Gaskets are made out of high grade Nitrile, Natural, Hyplon, Neoprene, Butyl, Viton rubber and Silicone and comes in different sizes and designs. We also develop Rubber Gaskets as per the clients̢۪ specification or design. Moreover, our Rubber Gaskets are economic as well. Available In Different SizesDesigns Applications Textile industryIrrigationPneumaticsSolar water heatingElectrical appliances

VIRA PUMPS supply bearing bushes in LTB grade lead bronze as well as carbon bushes as per the customers requirement for both 6" as well as 8" Submersible motors. The sizes and dimensions are correctly maintained in our ISO 9001: 2008 system for a sustainable performance. Carbon bush is manufactured using the best grade carbon and graphite with the help of latest tools and techniques at our well equipped production unit. Available in different finishes and sizes to meet the various requirements of the clients, we ensure that the offered bush is highly durable in nature. The provided Graphite Bush can be bought at an economical price range.

hub bearings, Valve Seals, all 2 & 3 wheeler parts, Clutch Assembly

gunmetal bearings, Flexible Coupling, Chain, Sprocket, Gears

Engine Bearings, bushings washers, Thrust Washers

RHP Bearing, festo pneumatic product, liner motion product, cnc coupling

bimetallic engine bearings, Aluminium Dies, castings dies, Jigs

Industrial Ball Bearings, High Temperature Grease, oilseals

Sintered Mixer Grinder Bearings, stainless steel sintered powder

pinion, Sugarcane Cutters & Knives, Sprockets, Rolling Mill Bearing, Rakes