Material Testing Equipment Dealers in Kabnur, Kolhapur

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India ) Features Hydraulic front loading wedge action grips Loading Accuracy as high + 1% Straining at variable speeds to suit a wide range of materials. Printer & PC Graphs enables to study the behavior of the material Continuous roll autographic recorder supplied as standard to enable study of the behavior of materials Motor driven threaded columns for quick effortless adjustment of lower cross-head-to facilitate rapid fixing of test specimen. High reading accuracy due to large size and design of dial. Wide range of standard and special accessories, including load stabilizer. Easy loading of specimens. Large effective clearance between columns enables testing of standards specimens as well as structures. Simple controls for ease of operation. Robust staining frame of an extremely rigid construction. Safe operation ensured be means of safety devices. Fully enclosed and protected pressure transducer RS 232 serial port to transfer data to computer for analysis/storage, evaluation etc. Manual control & release valve operation     Application ARUN Universal Testing Machine is designed for testing metals and other materials under tension, compression bending, transverse and shear loads. Hardness test on metals can also be conducted.  Principal of Operation Operation of the machines is by hydraulic transmission of load from the test specimen to a separately housed load indicator. The hydraulic system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage due to shock on rupture of test pieces.The Load is applied by a hydrostatically lubricated ram. Main cylinder pressure is transmitted to the cylinder of the pendulum dynamometer system housed in the control panel. The tansducer gives the signal to the electronic display unit, corresponding to the load exerted by the main ram.simultaneously the digital electronic fitted on the straining unit gives the mechanical displacement to the electronic display unit. Both the signals are processed by the microprocessor and load & displacement is displayed. Machine consists of Straining UnitAn elongation scale with a minimum graduation of 1 mm, is provided to measure the deformation of the specimen.Tension test is conducted by gripping the test specimen between the upper and lower cross-heads, Compression, transverse, bending, shear and hardness tests are conducted between the lower cross head and the table. The lower cross-head can be raised or lowered rapidly by operating the screwed columns thus facilitating ease of fixing of the test specimen. Control Panel The control Panel consists of a power pack complete with drive motor and an oil tank, control valves a pendulum dynamometer a load indicator system and an autographic recorder. Power Pack The power pack generates the maximum pressure of 200 kgf/cm2 the hydraulic pump provides continuously non-pulsating oil flow. Hence the load application is very smooth. Hydraulic Controls Hand operates wheels are used to control the flow to and from the hydraulic cylinder. The regulation of oil flow is infinitely variable incorporated in the hydraulic system is a regulating valve which maintains a practically constant rate of piston movement. Control by this valve allows extensometer readings to be taken. Load Indicator System This system consists of a large dial and a pointer. A dummy pointer is provided to register the maximum load reached during the test. Different measuring ranges can be selected by operating the range selection knob. An overload trip switch is incorporated which automatically cuts out the pump motor when the load range in use is exceeded. Pendulum Dynamometer This unit permits selection of favorable hydraulic ratios producing relatively small frictional forces. Pressurised oil in the loading cylinder pushes up the measuring piston proportionately and actuates the special dynamometer system. The piston is constantly rotated to eliminate friction. The dynamometersystem is also provided with an integral damper and ensures high reliability of operation. The load transmitted to the dynamometer is transferred through a pendulum to the load indicator. Autographic Continuous Roll Load-Elongation Recorder This unit is of the pen and drums type and is supplied as standard. The horizontal motion of the pen produces the load ordinate of the diagram and the drum rotation produces the extension ordinates in the ration of either 1:5 or 1:10. Accuracy & Calibration All ARUN Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every machine is then calibrated over each of its measuring ranges in accordance with the procedure laid down in BS : 1610 : Part 1 :1992 and IS 1828 : (Part 1) : 1991.ARUN Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 : (Part1) : 1991 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load. Below 20% of the selected range, the maximum permissible error is 0.2% of the full load reading.

• Color: White
• Weight: 300 KGS 
• Brand: Ratnakar
• Item Code: RFTG8D
• Usage/Application: Industrial
• Packaging Type: Box
• Load Capacity: 200KG-CM
• Type Of Testing Machines: ROTARY
• Diameter: 8 mm

• Material: Mild Steel
• Driven Type: Hydraulic
• Automation Grade: Automatic
• Color: Green
• Voltage: 220V
• Country of Origin: India

We offer universal fatigue testing machine. Shri ram industries (sri ftm 8): this machine is used to test the fatigue strength of materials and to draw s-n diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.

• Brand: ARUN MAKE
• Model Number: AI-FTM

Application : Fatigue Testing Machines are used to test the fatigue strength of materials and to draw S-N diagram by Research Institution Laboratories, Material manufacturers, and various industries. Models : AI-FTM8   Accuracy & Calibration : This machine conforms to requirement of IS : 5075 - 1969 Standards Salient Features : An interlocking system provided puts off the motor at specimen failure Light weight, compact size and very simple design Table model, no need of foundation Simple lever system of changing load Calibration is in Nm

• Power: 380V
• Condition: New
• Type: Testing Machine
• Features: PLC Smart Controlled.
• Frequency: 40 to 300 Hz
• Overall size (mm): 1000L X 500W X 600H

This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution. The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever. Total number of revolution at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirement of IS 5075-1969.Features Table model, no need of foundation. Simple lever system for changing load. Calibration in Nm available on request. Light weight, Simple design, Compact Size.

• Weight: 120 Kg
• Type Of Testing Machines: Fatigue Testing Machines
• Power: 0.5 HP
• Max. bending moment: 200 (Kg. cm)
• Bending moment adjustable: 25-200 (Kg. cm)
• Gripping dia of specimen: 12 mm
• Testing dia of specimen: 8 mm
• Rotating speed : 4200 RPM
• Accuracy of applied bending moment: +-1%
• Main Supply: 3ph 440v 50hz

• Maximum Capacity: 20 / 10 / 5 Kg
• Width between Columns: 160 mm
• Maximum Crosshead Travel: 160 mm

Microprocessor Microcontroller Based Unit Force Measurement Accuracy ± 1% Of Indicated Load Or 0.5% Of Full Load Value Whichever Is Higher Quick And Accurate Measurement Interchangeable Load Cells Modulus Data For Load & Displacement (For Selectable Models With Software) Optional Dot Matrix Printer Interface Optional Windows Xp Based Software With Rs-232 Interface Simple Controls For Ease Of Operation. Safe Operation Ensured By Means Of Safety Devices. Simple Hand Operated Mechanism Optional Automatic Computerized Operation With Drive & Motor Available

This Fatigue Testing Machine is known for carrying out Fatigue Tests on materials by putting it under exponential stress, tension and compression. We are an acclaimed Manufacturer, Supplier and Exporter of Fatigue Testing Machine. This Fatigue Testing Machine is manufactured in confirmation to the set industrial standards. Application : Used to test the fatigue strength of materials and to draw S-N diagram by Research Institution Laboratories, Material manufacturers, and various industriesModels : AI-FTM8 Accuracy & Calibration : This machine conforms to requirement of IS : 5075 - 1969 Standards Highlights : Light weightCompact size Simple designAn interlocking system provided puts off the motor at specimen failurTable model, no need of foundationCalibration is in NmSimple lever system of changing load

MCS is the leading company manufacturing & exporting all types of Material Testing machines and related special purpose machines with 25 years of experience in this field. We have a full fledged set up for manufacturing sophisticated state of the art UTMs, Tensile Testers, Hardness testers and specialized testing machines. We have over 500 diversified customers in the areas like Power, Steel & Roiling Mills, Foundries &, forging units, Automobile, defense, Research & Metallurgical Labs, Eng Colleges.

Operation of the machine is by hydraulic transmission of load from the test specimen through pressure transducer to a separately house load indicator. The system is ideal since it replaces transmission of load through levers and knife edges, which are prone to wear and damage.

The company is one of the major Manufacturers, Exporters and Suppliers of Fatigue Testing Machines in Ichalkaranji (India). The Fatigue Testing Machines prevent one of the major reasons behind the failure of the materials used in engineering sector. The Fatigue Testing Machines provide details about the fatigue properties of the different materials so that they can be used in the proper applications in accordance with the detail provided. The AI-FT series Fatigue Testing Machines are used for various processes like measuring the fatigue strength that provides assistance in the drawing of S-N diagram. The Fatigue Testing Machines are widely used by research institutes, auto industries and various manufacturers. Working Of Fatigue Testing Machines : Rotating beam type machine where load is applied in reverse bending mannerStandard 8 mm diameter specimen held in special holders at the ends and loadedLoading is done in a way that a uniform bending moment is experiencedSpecimen is rotated at 4200 RPM by a motor Highlights Of Fatigue Testing Machine : Light weightCompact sizeSimple designTable model with no need of foundationSimple lever systems for changing loadAccurately calibrated as per IS 5075Can be supplied with Nm calibration on request

Ours is the known organization deeply ingrained in the Ichalkaranji(India) and make sure to reach any destination with ease. Known as the trustworthy suppliers, we are offering only the finest quality Material Testing Machine at reasonable price.

Material Testing Machines, dynamic balancing machines

Material Testing Equipments, Calibration, Universal Testing Machine

Material Testing Machines, ROCKWELL TYPE HARDNESS TESTERS