Metal Testing Equipment Dealers in Ichalkaranji, Kolhapur

Leveraging on our industrial experience and industrious professionals we are able to manufacture and provide torsion testing machines. Our wide assortment of testing machines is at par with industrial standard and offers accurate measurement of torsion and fatigue tests. Torsion testing machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by pendulum dynamometer system Torque ranges can be adjusted by auto torque selector Torque can be applied to specimen be geared motor through gear box Autographic recorder gives the relation between torque and angle of twist. the accuracy of troque indication is +/-

• Voltage: 230 VAC
• Brand Name: Ratnakar
• Frequency: 50 HZ
• Phase: SINGLE
• Weight: 20 kg
• Dimension: 450x500x500 mm
• Width of Ample: 70-90 mm
• Thickness: 0.1-2 mm
• Least count: 0.01 mm
• Item Code: RET-20

• Dimension: 450 X 500 X 500mm
• Width: 70mm
• Thickness: 0.1 2mm
• Surface treatment: Polished
• Net Weight: 72Kg
• Least Count: 0.01mm

We are counted among the top Manufactures and Suppliers of Erichsen Cupping Testing Machine in India. "SHI" Erichsen Cupping Testing Machine is used to carry out Erichsen Cupping test on metals. The quick clamping and manual facilitates of Erichsen Cupping Testing Machine makes the machine operations faster and trouble free.

• Brand Name: ARUN MAKE
• Model Number: AI-ET 20

"AI" Erichsen tester is designed to carry out Erichsen Cupping test on metals. Quick clamping and manual facilitates faster and trouble free working of the machine.   Technical Data : Width of Sample mm -90, 70,  Thickness of sample mm- 0.1 - 2 Lest Count mm -0.01 Overall dimension (approx) mm -450 x 500 x 500

• Sample Thickness: 0.3mm
• Overall dimension (Approx): 500*525*525mm
• Sample width: 70 to 90 mm
• Net weight (Approx): 20kg
• Type: Testing Machine
• Condition: New

Erichsen Testing Machine, we offer, is fabricated from high-grade materials, in compliance with the standards. The machine is reckoned upon for functioning in a speedy and hassle-free way. Its deep drawing test is well acclaimed in the entire industry. It is specially designed to perform Erichsen Cupping Test on metals. And its convenient clamping makes it stand out. We are counted among the leading Manufacturers and Suppliers of Erichsen Testing Machine in Maharashtra.    Details : Suitable for cupping tests on sheet metals. Having thickness from 0.1 to 2 mm. Least count of measurement - 0.01 mm.   Installation : It is recommended that the machine is mounted on a rigid table. Reserves rights of change in the above specifications due to constant improvement of the design. The dimensions given above are all approximate.

• Material: Metal
• Model Name/Number: TTV-6, 10, 20, 50
• Usage/Application: Industrial
• Max. Torque Capacity (Nm): 100/200/500
• Torque Range (Nm): 20/50/100/200/250/500
• Nos. of Division on dial: 200
• Clearance between grips (mm): 0-400/450/500

we are engaged in providing high quality erichsen testing machine to our esteemed clients. These erichsen testing machines are fabricated from high-grade components and advanced technology, which enhances their performance largely. The clients can avail the erichsen testing machine from us in assorted technical specifications. The erichsen testing machine is available at highly affordable price. specifications suitable for cupping tests on sheet metals having thickness from 0.1 to 2 mmleast count of measuring : 0.01 mmtable mounting modelnet weight approx : 20 kg

MCS range of spring testing machines are used for quick and accurate testing of tension and compression springs. The machine comprises of two hard crome plated columns with fine cut single screw with hand wheel for manual loading and unloading arrangement. The machine uses a high precision load cell for measurement of force. For displacement measurement, mechanical linear scale or digital vernier caliper or rotary encoder is used. Measuring system of machine is based on latest microprocessor based electronics with tare facility.

This Torsion Testing Machine is designed for carrying out twist and torsion on different types of tubes, metals, wires and sheet material. The torque measurement in this type of Torsion Testing Machine is done with the help of pendulum dynamometer system. Also, the torque range of this Torsion Testing Machine can be adjusted with the help of auto torque selector. The torque, which is applied to the specimen by this Torsion Testing Machine, is done by geared motor via a gear box. Further, the autographic recorder gives relation between angel of twist and torque; the torque accuracy indication is done through a +. Machines up to 25000 Nm. Capacity will be available on special enquiry FIE reserves the rights of change in above specification due to constant improvements in design.

Torsion Testing Machine is designed for checking Torsional  porperty of varius metal wires, tubes, bars etc. Torque applied to the specimen is transfered to measuring  dial through lever mechanism. Torque is measured by  Pendulum Dynamometer system. Torque ranges can be adjusted by requred torque at other end of specimen. Autographic recordr gives the relation between Torque and Angle of Twist. These machines are calibrated as per latest relevent standards.

Mechatronic Control System is one of the leading companies, which is involved in the manufacturing and supplying of Torsion Testing Machines. These Torsion Testing Machines are designed with precision under the supervision of experts. Model : Mech.CS.TT Features : Auto torque selector to adjust torque rangesGeared motor to apply torque to specimen through gearboxAutographic recorder for relation between torque and angle of twistAccuracy + 1 % of the true torqueSuitable for Torsion and Twist test on various metal rods and flatsTorque Measurement by pendulum dynamometer system Attributes : Offer reliable resultsAnti-corrosiveHassle free operationsLess time consuming

The company is one of the well-known Manufacturers, Exporters and Suppliers of Torsion Testing Machines in Ichalkaranji (India). The Torsion Testing Machines are widely demanded by the clients owing to their excellent quality. The Torsion Testing Machines are used for checking the torsion on the various metals and metallic products. Why Our Torsion Testing Machines? Fabricated from quality raw materialsHighly reliableGive accurate resultsUsable over a wide testing range of materials

MCS range of spring testing machines are used for quick and accurate testing of tension and compression springs. The machine comprises of two hard crome plated cclomns with fine cut single screw with hand wheel for manual loading and unloading arrangement. The machine uses a high pricision load cell for measurement of force. For displacement measurement, mechanical linear scale or digital vernier caliper or rotary encoder is used. Measuring system of machine is based on latest microprocessor based electronics with tare facility.

• Weight: 100-500kg
• Application: Industrial
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant
• Material: Metal

We are a top-notch Manufacturer & Supplier of Torsion Testing Machine from Maharashtra, India. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and the latest techniques for its production. The Torsion Testing Machine is designed and developed in adherence with the stated international quality standards. Our Torsion Testing Machine can be acquired at the most nominal rates. 

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )   Features Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system. Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque angle of twist. The accuracy of torque indication is ± 1% of the true torque. Machines up to 25000 Nm. Capacity will be available on special enquiry. ARUN reserves the right of change in above specification due to constant improvements in design.

Erichsen Testing Machines   FIE Erichsen tester is designed to carry out Erichsen Cupping Test on metals. Quick clamping and manual operation facilitates faster and trouble free working of the machine.   Installation : It is recommended that the machine is mounted on a rigid table. • FIE reserves rights of change in the above specification due to constant improvement design.• The dimensions given above are all approximate.

hardness testing machines, SAROJ make Rockwell Hardness Testing Machines

Electronic Tensile Testing Machine, Mechanical Tensile Testing Machine

metal testing machines

metal testing equipment, Fettling Machine