Metal Testing Equipment Dealers in Kabnur, Kolhapur

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )   Features Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system. Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque angle of twist. The accuracy of torque indication is ± 1% of the true torque. Machines up to 25000 Nm. Capacity will be available on special enquiry. ARUN reserves the right of change in above specification due to constant improvements in design.

Features :• Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials torque measurement is by pendulum dyanometer system.• Torque ranges can be adjusted by auto torque selector.• Torque can be applied to specimen by geared motor through gear box.• Autographic recorder gives the relation between torque and angle of twist.• The accuracy of torque indication is ±1of the true torque.

• Advantage: Factory directly sale
• Biggest test torque: 500 nm
• Torsion Speed: 1.5
• Max Angle Range: 999.9 degrees
• Power supply: 230V ± 10% 50 Hz
• Dimensions: 600x450x1800mm (WxDxH)

We are the prominent Manufacturer & Supplier of high performance Digital Torsion Testing Machine. Fabricated using high-grade parts and components, our Digital Torsion Testing Machine is acknowledged for excellent performance, high strength, accurate results and longer service life. Our machine is thoroughly inspected by our quality analysts and complies with the set standards. We make available our Digital Torsion Testing Machine at market leading rates.   Features : 5 Digit 7 Segment ½ inch Red LED Display for LOAD Indication 4 Digit 7 Segment ½ inch Red LED Display for Angle of Rotation 2 Digit 7 Segment ½ inch Red LED Display for Number of Rotation Selection of Units Kgm or Nm for load Selection of Units Deg or Rad for Angle of Rotation Real Time Clock for report generation Password to safeguard unauthorized access for calibration and other important settings Multifunction Keyboard to select the parameters Data storage of last 25 Test Reports. The data of all the settings and reports is in memory even if power is absent. Report Printing facility on DOT MATRIX 80 column printer Rs232 communication facility(optional) Potential free NO contact(rated 2A @ 230Vac) to START/STOP TEST cycle. Safety Fuse Link(20mm) rated 230V,1A provided inside the controller

• Application: Industrial
• Brand Name: Ratnakar
• Power Consumption: AC
• Display Type: Analog
• Feature: conducting Torsion and Twist on various metal wires, tubes

we manufacture and supply torsion testing machine in the market. These torsion testing machines are engineered by adopting advanced technology that provides accurate testing results. To cater to the assorted requirements of the clients, we provide torsion testing machine in various types like hdm. Known for offering great accuracy and reliable results, the torsion testing machines is suitable for varied industries. specifications suitable for conduction torsion and twist on metal wires, tubes, sheet materials etc.torque applied to specimen by geared motor through gear box.autographic recorder as standard supply.various models : max capacity ranging from 6 to 600 kgfm.

Leveraging on our industrial experience and industrious professionals we are able to manufacture and provide torsion testing machines. Our wide assortment of testing machines is at par with industrial standard and offers accurate measurement of torsion and fatigue tests. Torsion testing machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by pendulum dynamometer system Torque ranges can be adjusted by auto torque selector Torque can be applied to specimen be geared motor through gear box Autographic recorder gives the relation between torque and angle of twist. the accuracy of troque indication is +/-

• Type: Computerized
• Weight: 500-1000 Kg
• Material: Stainless steel
• Torsional Speed: 0.1/0.2 RPM
• Ranges: 0.5 Kgm to 1000 Kgm
• Torque Ranges: 100,50,20 (NM)

Torsion Testing Machine Suppliers Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet and other such materials. Torque measurement is done by pendulum dynamometer system. Torque range can be adjusted by auto torque selector. Torque applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist. Our Torsion Testing Machine is easy to operate and quite durable. We are engaged in manufacturing and supplying of Torsion Testing Machine in India. Being one of the prominent Torsion Testing Machine Suppliers, we have established an extensive network across the country to ensure that orders are delivered on a timely basis.

• Material: Metal
• Model Name/Number: TTV-6, 10, 20, 50
• Usage/Application: Industrial
• Max. Torque Capacity (Nm): 100/200/500
• Torque Range (Nm): 20/50/100/200/250/500
• Nos. of Division on dial: 200
• Clearance between grips (mm): 0-400/450/500

• MODEL NO: ET-20

  Suitable for cupping tests on sheet metals having thickness from 0.1 to 2 mm. Least count of measuring - 0.01 mm. Table mounting model. Net weight approx - 20 kg.

Mechatronic Control System is one of the leading companies, which is involved in the manufacturing and supplying of Torsion Testing Machines. These Torsion Testing Machines are designed with precision under the supervision of experts. Model : Mech.CS.TT Features : Auto torque selector to adjust torque rangesGeared motor to apply torque to specimen through gearboxAutographic recorder for relation between torque and angle of twistAccuracy + 1 % of the true torqueSuitable for Torsion and Twist test on various metal rods and flatsTorque Measurement by pendulum dynamometer system Attributes : Offer reliable resultsAnti-corrosiveHassle free operationsLess time consuming

With our domain expertise, we are recognized as a chief Wire Torsion Testing Machine Manufacturer, Exporter and Supplier in Maharashtra. The Wire Torsion Testing Machine, we offer, is made using advance technology and serves the testing requirements of the clients efficiently. The Wire Torsion Testing Machine is extensively used by varied industries for testing both test pieces as well as final products. Known for offering great accuracy and reliable results, the Wire Torsion Testing Machine is suitable for varied industries. Used for Conducting Torsion And Twist Tests On Metal wiresTubesSheet materials Our Wire Torsion Testing Machine Is Demanded Due To Simple in constructionEasy to operate, control and maintainAdvanced functioning Features Various models - Max. Capacity reading from 6 to 600 kgfmTorque measurement accuracy within + 1%Models with electronic display & printer facility available

• Weight: 100-500kg
• Application: Industrial
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant
• Material: Metal

We are a top-notch Manufacturer & Supplier of Torsion Testing Machine from Maharashtra, India. We are backed by a team of skilled and experienced personnel who makes use of sophisticated machines and the latest techniques for its production. The Torsion Testing Machine is designed and developed in adherence with the stated international quality standards. Our Torsion Testing Machine can be acquired at the most nominal rates. 

Torsion Testing Machine is designed for checking Torsional porperty of varius metal wires, tubes, bars etc. Torque applied to the specimen is transfered to measuring dial through lever mechanism. Torque is measured by Pendulum Dynamometer system. Torque ranges can be adjusted by requred torque at other end of specimen. Autographic recordr gives the relation between Torque and Angle of Twist. These machines are calibrated as per latest relevent standards. Calibration is within ±1% within operating range of all models.

Features :   • Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet materials. Torque measurement is by torque transducer system.• Torque can be applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque ang angle of twist.• The accuracy of torque indication is ± 1% of the true torque.   The electronic control panel is built using 8085 microprocessor which incorporates state of the art technology with following features - • Front Panel membrane type kay board for test setup.• 7segment digital display of load displacement/extension.• Printer port interface.• Serial port communication with PC.• Storage of important parameters such as peak load & maximum dispalcement after test.• Preload selection to take care of initial slippage.• Optioanl real time graph & PC software.

This Torsion Testing Machine is designed for carrying out twist and torsion on different types of tubes, metals, wires and sheet material. The torque measurement in this type of Torsion Testing Machine is done with the help of pendulum dynamometer system. Also, the torque range of this Torsion Testing Machine can be adjusted with the help of auto torque selector. The torque, which is applied to the specimen by this Torsion Testing Machine, is done by geared motor via a gear box. Further, the autographic recorder gives relation between angel of twist and torque; the torque accuracy indication is done through a +. Machines up to 25000 Nm. Capacity will be available on special enquiry FIE reserves the rights of change in above specification due to constant improvements in design.

The company is one of the well-known Manufacturers, Exporters and Suppliers of Torsion Testing Machines in Ichalkaranji (India). The Torsion Testing Machines are widely demanded by the clients owing to their excellent quality. The Torsion Testing Machines are used for checking the torsion on the various metals and metallic products. Why Our Torsion Testing Machines? Fabricated from quality raw materialsHighly reliableGive accurate resultsUsable over a wide testing range of materials

MCS range of spring testing machines are used for quick and accurate testing of tension and compression springs. The machine comprises of two hard crome plated cclomns with fine cut single screw with hand wheel for manual loading and unloading arrangement. The machine uses a high pricision load cell for measurement of force. For displacement measurement, mechanical linear scale or digital vernier caliper or rotary encoder is used. Measuring system of machine is based on latest microprocessor based electronics with tare facility.

metal casting equipment, Computer Controlled Shelldrying Conveyors

metal testing equipment, Fettling Machine

metal testing machines

hardness testing machines, SAROJ make Rockwell Hardness Testing Machines

Electronic Tensile Testing Machine, Mechanical Tensile Testing Machine