Testing Machines Dealers in Kabnur, Kolhapur

We are Manufacturer, Supplier, Exporter of all our product range and our setup is situated in Kolhapur ( Maharashtra, India )   General Description The pendulum Impact Tester, Model IT-30 is designed for conducting Izod, Charpy test. The test methods confirm to BS : 131 : Part 4-1972 (Amended 15 Aug. 1993) BSEN : 10045-2 : 1993 The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for Izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture of the test specimen and is read from the maximum pointer position on the dial scale.(It is read on digital readout in case of electronic machines.)There are two strikers and one combined support available for fitting in to the pendulum and on to the base of the machine for the Izod, Charpy test respectively, Changing from one striker to another is achieved simply by fixing the new striker into its position.

• Type: Computerized
• Weight: 500-1000 Kg
• Material: Stainless steel
• Torsional Speed: 0.1/0.2 RPM
• Ranges: 0.5 Kgm to 1000 Kgm
• Torque Ranges: 100,50,20 (NM)

Torsion Testing Machine Suppliers Torsion Testing Machine is designed for conducting torsion and twist on various metal wires, tubes, sheet and other such materials. Torque measurement is done by pendulum dynamometer system. Torque range can be adjusted by auto torque selector. Torque applied to specimen by geared motor through gear box. Autographic recorder gives the relation between torque and angle of twist. Our Torsion Testing Machine is easy to operate and quite durable. We are engaged in manufacturing and supplying of Torsion Testing Machine in India. Being one of the prominent Torsion Testing Machine Suppliers, we have established an extensive network across the country to ensure that orders are delivered on a timely basis.

• Overall dimensions: 486*337*657 mm
• Depth of Throat: 130mm
• Power consumption: 100W
• Measuring range: 5-3000HV
• Weight: 68 kg
• Brightness of the light source: PWM

We manufacture and supply Vickers Hardness Testing Machine in India. Our Vickers Hardness Testing Machine is simple & accurate in design. Vickers Hardness Testing Machine is suitable for measuring the hardness of precision metallic parts with wide testing range – from soft to hard & accurate results are widely acclaimed. Our Vickers Hardness Testing Machine strictly conforms to IS:1754: 2002 & ISO 6507 – 2: 1997.Features : Wide testing range, from soft metal such as lead, up to the hardest, like hardened steel Tiny indentation allows testing of precision finished parts. Thin sheet metal is perfectly tested because applied load is very small. Same hardness number is obtained on the same specimen, regardless of the load applied Motorized loading and unloading cycle Built – in projection screen to get accurate result.Construction : To accommodate the high precision loading system & an optical projection screen the machine frame is designed sturdy. Specimen is to be placed on testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetration by means of a lever & weights. The load is removed automatically after a specific lapse of time. The objective is indexed with the test piece & the diamond indentation is projected on the measuring screen. The diagonals of the indentation can be measuring by means of the micrometer screw of the projection screen.

• Brand Name: ARUN MAKE
• Model Number: AI-UTN

ARUN Universal Testing Machines comply with Grade "A" of BS : 1610 : Part 1:1992 and class 1 of IS 1828 : (Part1) : 1991 An accuracy of + 1.0% is guaranteed from 20% from 20% of the load range selected to full load.

• Parameter: HB
• Display Type: LCD
• Brand Name: RATNAKAR
• Automation Grade: Automatic
• Model Name/Number: RB 3000 O PC TS
• Weight: 1500 KGS 

• Driven Type: Electric
• Power: 1-3 Kw
• Voltage: 220V
• Max. Test Height: 410 mm
• Dept of throat: 200 mm
• Machine height: 995 mm
• Net Weight: 450 Kg
• Optical Device: Direct reading optical device with 14 x magnification

• Material: Metal
• Load Capacity: 500/750/1000/1500/2000/2500/3000 Kgf
• Usage/Application: Industrial
• Type Of Testing Machines: Optical Brinell Hardness Tester
• Max. Test Height: 254/380/410 mm
• Depth Of Throat: 150/200 mm

We stand tall as a highly efficient Manufacturer, Exporter & Supplier of Electronic Rockwell Hardness Testing Machines. The Model ‘T RAS' Electronic Rockwell Hardness Testing Machines provide optimum accuracy and can be customized as per the specifications of our clients. These Electronic Rockwell Hardness Testing Machines are competitively priced as well as timely delivered. Specifications Automatic zero setting dial gaugeCapacity : Throat 133 mm Test loads 60, 100 & 150 kg for tests on Rockwell A, B, C scaleConfirm to IS: 3804, BS: 891 & ASTM: E -18External load selection just by dialingMaximum Text Height : 230 mm

Our company offers compression testing machines (concrete), which is hand operated and has a capacity of 250 kn (25 tonne). This is designed so that it efficiently meets the need to test concrete cube for its compressive strength. This equipment is the most simple, economical and reliable means of testing. • specifications: compression testing machines is:516, bs 1881-115 • rsi-091 compression testing machine, hand operated, 250 kn (25 tonne), channel model : double plunger pump with hydraulic load gauge. • rsi-092 compression testing machine, hand operated, 500 kn (50 tonne), channel model : double plunger with hydraulic pressure gauge of0-500 kn capacity. • rsi-093compression testing machine, hand operated 1000 kn( 100 tonne), channel model: fitted with double plunger pump with hydraulic load gauge 0-1000 kn capacity. • rsi-094 compression testing machine, hand operated, 1000 kn (100 tonne), 4- pillar model, fitted with double plunger pump and hydraulic load gauge 0-1000 kn of 200 mm dia. Portable model. Top and bottom fiber cover.

We make sure that the payment transaction of our customers, whether online or offline, is secured with us. We accept payment through all major payment modes. Buyers will not regret purchasing our products, as they conform to industrial quality management standards.

As we are counted among the reliable names in the industry, we are involved in carrying out a secured payment processing method. We undertake both online and offline methods for the convenience of the clients. Owing to our association with the reliable vendors, we are able to obtain quality-approved and certified inputs. Thus, we ensure that our products are of unmatched quality. Our avant-grade J Brinell hardness testing machine is available with a quality warranty of 12 months. 

• Weight: 100-1000kg
• Warranty: 1 Year
• Material: Metal
• Application: Industrial
• Durability: Long Life
• Surface Finishing: Polished
• Resistivity: Rust Resistant

We bring forth our top-notch Universal Testing Machine (UTK 100 MPC) for our customers across the country. We check the Testing Machine on stringent quality parameters to ensure customers obtain a dependable and reliable product.   Features : Specially designed for high tensile TMT bars. Supports Tensile, Compression, Transverse, Shear and other similar tests. Load capacity 100 Ton (1000kN). Testing of round bars from 10 to 40 mm. Stroke length of 250mm. Available in Mechanical and Computerized control Panel. PC based software for capturing load Vs extension data. Extensive analysis with Yield, Proof and report.

• Tensile Test on Metal, Synthetic Materials etc. • Compression Tests on Springs, Rubber etc. • Bending Transverse Test on Beams, Synthetic Materials etc. • Shear Test on Metals, Polymers etc.

Electro Mechanical Universal Testing Machines UNITEK 9700 Series with Interface & Real Time Graph ( Panel / PC Controlled ) Electro Mechanical Universal Testing Machines UNITEK 9700 Series with Interface & Real Time Graph ( Panel / PC Controlled )   Technical Description : FIE Universal Testing Series Unitek 9700 are microprocessor based Electromechanical machines with Servo drive designed for testing & Studying mechanical behavior of various materials like metals, polymers Etc. These machines offer good built-in features to offer excellent stand alone performance for standard tests & great flexibility for complex analysis. These machines confirm to IS, BS & ASTM standards.   Main Features : • Precision DC Servo motor & drive with ball lead screw gives an advanced drive system with 1 to 1000 standard speed range. • Computerised Microprocessor based instrumentation to measure display & store load & displacement value. • Provision for load cell interchangeability & thereby automatic selection of load full scale. • Speed selection through Data entry or variable speed selector through potentiometer. • Facility for mounting different load cells & clamping devices to suit different tests & materials such as thin wires, metalsheets, fiberglass, leathers,    springs, cardboards etc. • Built-in parallel interface to connect printer for data & curve print-out. • Safety interlock for overload & limit switch sensing to ensure protection during test. • Universal applications in R & D, education, quality control & production for test like tensile, compression, bending etc.   Electronic Control Panel : (Series Universal 2001) • Microprocessor based panel incorporating state of art technology with following features. • Front Panel membrane type key board for machine operation with numeric keys for data entry. • 7segment display. • Auto load cell identification. • Data entry with numeric keyboard of test parameters including speeds, rupture % peak, preload, modulus data , test data & specimen data etc. • 20input data set storage, 50 results storage, maintains data & results during power off. • Batch test facility for generating batch & statistics result using same data set. • optional remote to ease specimen loading/unloading. • RS 232C serial port, Optional windows based software available for..... • On line graph on PC. Data analysis, statistics, point tracing superimposing graphs to compare with standard, zooming graph etc.   Printer port for printer interface with ..... • Graph & result printout. • Test certificate printout.• Batch certificate printout. • Simple statistic printout.   Optional Accessories : FIE offers a wide range of optional accessories along with unitek 9700 Machines to cover almost every material test requirement.   Load Cells : FIE offers Strain gauge type Universal load cells in different capacities in the following nominal ranges :  100N, 250N, 1kN, 2.5kN. Load cells of different capacity can be offered as per customers requirements.   Grip & Clamping Devices : A wide range of grips are available from FIE such as : • Vise type grips.• Single threaded grips. • Compression Plates. • Bending Fixtures. • Shearing Attachments.   Extenso meters : Electronic analog extensometers are offered along with interface card on the control panel to measure with a resolution of 1 micron. • Model : EE2-STRAIN GAUGE   • Serial Communication & Software Package on PC The Universal 2001 series control panel can be hooked to any PC using RS-232 communication port. FIE offers different windows based software packages with real time graph on PC to enable the user to effectively evaluate different parameters. The features include : • Real time graph, User friendly software.• Extensive graphics on screen for curve plotting, magnification and zooming. • Software features includes Graph comparison, point tracing facility. Different units selection for load & displacement. • Statistical evaluation with water fall dig., Mean deviation, frequency distribution, Skew dig., Historigram. Also calculates max. value, min. value, mean value,    Variance, Standard Deviation.(Other statistical parameters on request). Selectable batch & statistical printouts. • Evaluation of wide range of user selectable parameters such as % elongation, % reduction in area, young's modulus, yield stress, proof stress etc. • Software packages for Shear, Bend, Torsion, Rubber, Textile etc. • Custom built application software to suit customer requirements.    

We are listed among the foremost Compression Testing Machines Suppliers based in Maharashtra. We offer superior quality Compression Testing Machines that are equipped with wear resistant spares and latest technology which makes them the best available option in the market. Complies To Indian Standards Specification 516-1959 Test Cube Size 5cm x 5cm x 5cm7.06cm x 7.06cm x 7.06cm10cm x 10cm x 10cm15cm x 15cm Test Concrete Cylinders 10 x 20cm15 x 30 cm

Known for saving time as well as labor, Electronic Universal Testing Machine, we offer, is greatly demanded in the global market. The Electronic Universal Testing Machine manufactured by us efficiently tests both test pieces as well as final products. The Electronic Universal Testing Machine offered by us delivers accurate results, due to which it is suitable for varied testing requirements of different industries. Our Electronic Universal Testing Machine Is Used For Testing BendingShear testsCompressionTensile strength Our Electronic Universal Testing Machine Is Demanded By Engineering industryAutomobile industryPharmaceutical industryLaboratory and foundries

Whether it is testing of hardness of alloys or metals of any kind (soft or hard) and shape (irregular, round or flat), this Rockwell Hardness Testing Machine is suited for testing different types of material. Features such as ease-of-operation and simple design make this Rockwell Hardness Testing Machine a great buy. Best suited for different laboratories, inspection department, tool-rooms, factories, etc., this Rockwell Hardness Testing Machine allows accurate results. Conform To IS : 1586 - 2000, BS : 891 parts 1 & 2, ASTM : E 18 for Rockwell Test, IS : 2281 -1983, BS : 240, ASTM : E10 for Brinell Test & IS " 1586-2000, ASTM : E18 for Rockwell Superficial Test Principle : Rockwell & Rockwell superficial tests consist of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force, and then, measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.

Mechatronic Control System is one of the leading companies, which is involved in the manufacturing and supplying of Torsion Testing Machines. These Torsion Testing Machines are designed with precision under the supervision of experts. Model : Mech.CS.TT Features : Auto torque selector to adjust torque rangesGeared motor to apply torque to specimen through gearboxAutographic recorder for relation between torque and angle of twistAccuracy + 1 % of the true torqueSuitable for Torsion and Twist test on various metal rods and flatsTorque Measurement by pendulum dynamometer system Attributes : Offer reliable resultsAnti-corrosiveHassle free operationsLess time consuming

Computerized universal testing machine, SALIENT FEATURES Windows Based Click and Go Software Package. Supports Tensile, Compression, Bending and many more Tests. Confirms BIS 1825 - 1991 and ISO - 7500 - 1986 Standard Customer defined reports Compensated for main screw clearances and frame stiffness. Extensive Database support.

The pendulum is mounted on antifriction bearing. It has two starting positions, for Charpy test pendulum swings down to breack the specimen and the enery absorbed in the specimen is between height of drop before rupture and the height of rise after rupture of test specimen. The reading is shown on dial scale from maximum pointer positon. MCS has developed electronic model MIT - 30 (E) microprocessor based panel with digital display. The reading is directly available on digital display. It aslo provided printer interface.

krystal manufactures the sophisticated and highly precise servo drive controlled universal testing machines. Features - rigid design with ball screw and columns, - tests facility for - tensile, compression, transverse, shear etc. Available in tbale top or floor mounted design. - capacity range from 500n to 10000n. - precise data acquisition using the krystalmet software.

• Country of Origin: Made in India
• Material: Mild Steel
• Voltage: 220 V
• Phase: Single Phase
• Frequency: 50/60 Hz
• Weight: 380 Kg
• Power Source: Electricity
• Brand: Aitawade Industries
• Supply: AC
• Warranty: 1 Year
• Automation Grade: Semi-Automatic
• Capacity: 300 KN
• Display Type: Analog

We are one of the major Manufacturers, Exporters and Suppliers of Spring Testing Machines in Ichalkaranji (India). The Spring Testing Machines are used for quick and accurate testing of the various types of tension and compression springs. The Spring Testing Machines consist of two hard core plated columns that have a tine cut single screw. The Spring Testing Machines also have a hand wheel that is used for the manual loading and unloading of the components. The Spring Testing Machines make use of a high precision load. Apart from that, the mechanical linear scales, digital vernier calipers or rotary encoders are used in the Spring Testing Machines for the measurement of displacement. The Spring Testing Machines have a measuring system that is modeled on the modern microprocessor based electronics and comes with all kinds of facilities. Features Of Spring Testing Machines : Optional RS-232 Computer interface with window based softwareMicroprocessor based unitOptional dot matrix printer interfaceModulus data for load & displacementForce measurement accuracy W-1% of indicated load or 0.5% of full load value whichever is higherQuick and accurate measurementInterchangeable load cells Options For Spring Testing Machines : Motorized loading operationSerial interface hardware with data transfer software to computerRotary encoder with separate digital unit 0.1 or 0.01 mm resolution9/24 pin Dot-Matrix printer interfaceDigital vernier scale with 0.01 mm resolution for displacement Indication (6" or 12")