Cement Grout Dealers in Kolkata

• Aspect: Grey Powder
• Density: 2200 TO 2300 Kg/m3
• Expansion: 0.1 to 0.5%
• Compressive Strength at 27° C (Approx After 3 days): 30N/mm2 (Min)
• After 28 Days: 60N/mm2 (Min)

Grout HS — is a Ultra High Strength, Free Flowing Non-Shrink, and Chloride Free Grout Conforming to BS-1881, Part 116-1983. Uses :  Grout- HS is used for grouting of Bolt pockets and base plates grouting of foundation Bolt for all types of machinery in cement, textile, paper & steel industries, bridges bearing pads, columns in pre-cast construction.Advantage : Grout HS is an economical and easy to use material, requiring only addition of water. It is very easy to mix and Placement can be done with high flow characteristics, rapid strength development, adjustable consistency and compressive strength up to 7ON/mm2 (28 days) is achieved it does not segregate and bleed. It is impact and vibration resistant, non-corrosive to steel and iron, non-toxic and safe to handle.Application : All grouting areas must be free from the loose concrete, oil, grease, and dust where Grout HS will be placed. The grouting areas to be saturated with water and it are to been sured that no stagnant water is present before application. Add Grout HS Powder to clean water as per the recommended dosages. Keep on mixing with a grout or Concrete mixer till a smooth and even consistency is achieved. Mixed grout should be used within 15 minutes of preparation. After initial hardening of the grout, it should be kept damp either by wet Hessian Cloth or with pounding for a minimum of seven days. Water and Powder ratio varies from 0.12 to 0.13 depending on the consistency requirement of the site 25Kg of the material will yield approximately 12.0 Litre of Fluid Grout and 11 .0 Litre of plastic Grout mix respectively. Placing conditions including temperature may have to be assessed before pouring the grout at site. Small trials batches may be tried to ascertain best working consistency.Shelf Life : 6 months from the date of manufacture in unopened condition. To be stored in a cool and dry covered space should be protected from direct sunlight.Handlinkg Precaution : Grout HS is non-Toxic and Ingestion is to be avoided. If contact with eyes occurs, wash well immediately with water and seek medical advice.

• Type: Epoxy Grout
• Material: Epoxy
• Application: Home, Industry, Industrial
• Color: Brown, Grey, White
• Feature: Anti-Wrinkle, Easily Washable, Eco-Friendly, Good Look, Good Quality, Impeccable Finish, Quick-Dry, Safe Use
• Technics: Machine Made
• Country of Origin: India
• Brand Name: Chemfix India

   Three component epoxy grout mortor system for eqipment base, pump, compressor. Free flowing, high strenth excellent bonding with foundation and base plates. Good chemicals resistance. Epoxy grout won't crack, shrink, or discolour, making it ideal for applying in wet areas, such as showers. It's also highly resistant to the harsh chemicals found in cleaning products. As an added bonus, unlike traditional cement grout, epoxy grout does not need to be sealed, due to its non-porous nature.

• Country of Origin: India
• Type: Cold Mix Bitumen Compound
• Application: Construction
• Color: White
• Feature: Supreme Quality
• Grade Standard: Construction Grade
• Form: Liquid
• Manufactured By: Bharat Bitumen Technologies

• Brand Name: Myk laticrete
• Application: Construction
• Packaging Size: 5 kg 
• Type: A Grade
• Joint width: 1 mm to 10 mm
• Color: All color
• Packaging Type: Bucket
• Country of Origin: Made in India

• Grey: Grey

Non shrink Grouting cement 25kg bag bag fosroc gp2

• Brand Name: Ardex Endura
• Application: For Tiles Joint Grout
• Packaging Size: 1 kg
• Joint width: Upto 12 mm
• Packaging Type: Plastic Container
• Pot Life Of Mix: 45 minutes
• Mixed Density: 1.70 kg/m3
• Foot Traffic: 24 hours
• Full Cure: 7 days
• Temperature: Prolonged -30 Degree Celsius to 50 Degree Celsius
• Resistance: Intermittent upto 70 Degree Celsius
• Shore D Hardness: > 70
• VOC Content: 113.78 g/l
• Global Migration Test: Passes

• Form: Powder
• Density: 1650 kg/m3
• Packaging Type: Bag
• Usage: Construction
• Shelf Life: 12 months
• Tile Grout Type: Ceramic
• Moq: As per Customer

Although both are applied as a thick emulsion and harden over time, grout is distinguished from its close relative mortar by its viscosity; grout is thin so it flows readily into gaps, while mortar is thick enough to support not only its own weight, but also that of masonry placed on top of it.Structural grout is often used in reinforced masonry to fill voids in masonry housing reinforcing steel, securing the steel in place and bonding it to the masonry. Non-shrink grout is used beneath metal bearing plates to ensure a consistent bearing surface between the plate and its substrate.

Powdered Tile Grout, Tigonis Water Proof Wall Putty, Block joining Mortar

The compound is laid hot by Trowel over the primed surface to any desired thickness and the surface gets hardened as it cools.This surface is now ready for use. Acid Remarks Sulphuric Acid(to 30%)  Resistant  Hydrochloric Acid(to 20%)  Resistant  Nitric Acid(to 5%) Resistant  Phosphoric Acid(to 15%)  Resistant  Acetic Acid(any concentration) Not Resistant  Chromic Acid(any concentration)  Not Resistant  Hydrofluoric Acid(to 5%)  Limited

We are manufacturing products like as slate tile grout.

Epoxy Grout, Sodium Silicates, cement additives, Waterproof Coatings

Engineering Grouts, Waterproof System, admixtures, surface treatment

mastic based mastichem compound

Cement Compound, Acid Proof Tank Lining, processed minerals

Vista Superplast HS Cement Grout, Vista Combustion Catalyst

Tile grouts, Wall Putty, Tile Adhesives, Mortar

Engineering Grouts, Concrete Admixture, Industrial Flooring System