Coal Fired Thermic Fluid Heater Dealers

• Firing Mode: Semi Automatic
• Maximum Temperature: 300 Deg C
• Capacity: 1lakh kcal/hr to 30 million Kcal/hr
• Design Thermal Efficiency: 90%
• Frequency: 50/60 Hz
• Finish: Painted

• High Efficiency: High Temprature
• Low Fuel Cunsomption: Suits for Refinery, Food Industry

We are offering wood fired thermic fluid heater, coal fired thermic fluid heater etc. Wood coal petcock fired 4 pass semifully automatic vertical double coil unit type thermic fluid heater. Capacity 4 lac kcal & up to 10 lac kcal.hr.

We offer 4 Lakh Kcal capacity wood fired thermic fluid heater, Thermax make, Model VTB - 04, year of manufactured 2008, Complete boiler with internal pipeline, ducting, MS frames, expansion tank support, circulation pump and ID, FD fans with motors. Presently on foundation in excellent condition

ENERGYPACK external furnace horizontal coil type forced circulation with ID & FD fan for solid fuel firing system having higher furnace volume & grate area to burn low calorific fuel with ¾ passes of flue gases for better efficiency of the complete system with air preheater.

We are offering coal fired thermic fluid heaters.Backed by a team of professionals, we are manufacturing of coal wood fired steam boiler that is widely used in various industries for steam boiling purposes. These are fabricated as per international quality parameters to provide clients with best grade product. In our range of steam boilers, the thermic fluid has a provision of being heated up to 320 degree celcius. Features: 1. It is circulated in a close cycle to the point of use where it gives up its heat before returning to the primary source for reheating. 2. The transfer of heat takes place at near atmospheric pressure as compared to a pressure as required by saturated steam at 300 degree celcius. 3. Safety provisions which results in drastic cut down on capital expenditure. 4. Thermic fluid used in the system is non corrosive & completely free from any suspended or dissolved solids, resulting in substantial reduction in repairing and maintenance cost.

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.These models are designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.

• Brand: Burner India
• Material: Mild Steel
• Automatic Grade: Automatic
• Power Source: Coal
• Application: Industrial, Industrial Heating
• Feature: Durable, Easy Installation, Minimal Maintenance, Stable Performance
• Type: Coal Fired Thermic Fluid Heater
• Country of Origin: India
• Temperature: 250-300°C
• Shape: Round

Description we are engaged in manufacturing and supplying Coal Fired Thermic Fluid Heater. Offered range of heater is manufactured under the supervision of experienced professionals, who make use of quality-approved material and follow the established guidelines of the industry. Along with this, to ensure high quality standards, a team of experts monitors every stage of manufacturing. We also offer these heaters in customized range, so as to match the needs of the customers.CAPACITY : - UPTO 25 LAKH KCAL/HRFUEL : - COAL Features:   · Optimum functionality· Heat resistance· Longer service life· Low maintenance

Our oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil fired heaters, thermal oil heater are optimized thermodynamically and have high efficiency along with brilliant heat transfer to the thermic fluid. Their combustion chambers are dimensioned properly and have sufficiently long length. Thus, the flame can burn fullOur oil gas fired thermic fluid heaters operate at an atmospheric pressure of up to 300°C and use a special oils as the heat carrier. As compared to water and steam, oil fired heaters, thermal oil heater requires 85 bar pressure to get the said temperature. Our Alfa oil fired heaters, thermal oil heater are optimized thermodynamically and have high efficiency along with brilliant heat transfer to the thermic fluid. Their combustion chambers are dimensioned properly and have sufficiently long length. Thus, the flame can burn fully, by keeping the emission values very low, for all fuel types. , by keeping the emission values very low, for all fuel types.

• Length(mm): 4600, 6000, 7500, 7800, 10000
• With(mm): 3800, 4000, 4500, 5400, 6200
• Max.Fluid Outlet Temperature: 300oC

this system is forced circulation fully automatic thermic fluid heater where thermic fluid is circulated in a closed loop through heater and user equipment circuit where the heat is dissipated to process. The same thermic fluid is re-circulated through heater for heating. The thermic fluid heater gives high temperature upto 300 oc using thermic fluid oil at near atmospheric pressure as compared to steam heating which requires 85 kgcm2 pressure

• Temperature: Up to 300-350°C

We expertise in manufacture and supply of Wood or Coal Fired Horizontal Thermic Fluid Heater that are known for high performance and durability. These heaters have an external furnace where fuel is burned and the heater assembly consists of a nest of concentric helical tube coils placed within a sturdy MS shell. Due to their excellent features and fuel efficiency these are highly demanded among our clients.External firing arrangement eliminates the possible damage to the thermic fluid heater coil.

• Maximum Temp:: 300° C

Automatic Mechanised screw fuel feeding makes fuel feeding OFF & ON when set temperature is achieved & reduced, respectively.Micro Processor Based VF fuel feed drive is used to adjust the rate of fuel feeding as per Plant load requirement. Most of the Solid Fuels, including Crushed Coal Lignite Agro waste DOC Saw Dust can be used in this system.Large size Air Pre-Heater Water ,Pre-Heater, reduces dry flue gas losses and improves the Waste Heat Recovery and increases combustion Air Temperature.

• Capacity: 50,000 Kcal/Hr. to 15 Lacs Kcal/Hr.
• Fuels: Coal,Wood,Lignite,Pet-Coke, Agro Waste Fired

• Feature: Sturdy design • Trouble-free operation ,Less power consumption,

• Temperature: Up to 300-350 Degree C
• Fuel Type: Bio mass
• Firing Mode: Automatic

• Material: SS
• Brand Name: Shanti
• Height: Upto 25 feet
• Capacity Heat Output: 50,000 Kcal/hr to 40 lakh Kcal/hr
• Surface Treatment: Powder Coated

Energypack external furnace horizontal coil type fored circulation with id & fd fan for solid fuel firing sysytem having higher furnace volume & grate area to burn low calorific fueal.      

• Circulation: 3HP

The high temperature Thermic Fluid Heater is a forced Circulation water tube design in which thermic fluid under pressure circulate though a set of nested coils while draft combustion gases travel across the coils. The hot gases envelop the entire tube surface making maximum use of both Radiant & convective heat to achieve very high heat transfer rates.

Coal Fired Thermic Fluid Heater, Gas Fired Vertical Thermic Fluid Heater

Coal Fired Thermic Fluid Heater, Thermic Fluid Heater, Pulse Jet Bag Filter

Coal Fired Thermic Fluid Heater, Steam Boiler Fabrication Services

Coal Fired Thermic Fluid Heaters, Oil & Gas Fired Steam Boilers

Coal Fired Thermic Fluid Heater, Thermic Fluid Heater, Steam Boiler

Coal Fired Thermic Fluid Heater, Boiler Chimney, Boiler Economizer

Coal Fired Thermic Fluid Heater 300000 kcal / hr Capacity, Gas Fired Boiler

Coal Fired Thermic Fluid Heater, coal handling equipment

Coal Fired Thermic Fluid Heater, Heat Recovery Unit, Electric Water Generator