Drilling Rig Dealers in Kolkata

Integral Drill Steels are normally produced from 19mm (3/4" ), 22mm ( 7/8") or 25mm (1") Hexagon Drill Steel, where the dimensions given are measured across the flat of the hexagon.Integral Drill Steels are a fixed length with a shank at one end and a bit at the other, and are able to drill to a depth equivalent to their effective length. The bit may consist of a single chisel shaped tungsten carbide insert or three such inserts.To drill deep holes, the rods are designed to be used in a series where the length of any rod used is longer than the one used just before it. To do this, a series of rods must be produced so that the bit diameter is reduced for each increase in length of rod to prevent jamming of the bit in the hole.

• Length: 400Mm To 1200
• Model Number: ME45
• Size: 150MM TO 600MM
• Diameter: 150Mm To 600Mm
• Usage/Application: Cutter/Bore Piling Equipments

We are offering Drill Rods

We are the leading manufacturer, trader and supplier of a wide and exclusive range of SPM Machine. Our offered range of this SPM Machine is suitably required for all types of applications. Our offered SPM Machine is strictly tested by our industry approved parameters in order to ensure the flawlessness of the product.

• Material: SAE1541
• Brand Name: Wesbendia-Drill
• Country of Origin: Made in India
• Usage/Application: Mining

• Material: Carbide Tipped
• Type: Brad Point, Reduced Shank, Straight Shank, Hex Shank, Taper Point
• Color: Black
• Length: 1600 mm
• Usage/Application: Mining, Drilling
• bit diameter: 34 mm

Radiant Hydraulic Face Drilling Machines (with Dust Suppression System) have been developed with an idea to achieve Wet Drilling on Coal Faces to avoid fatigue from coal dust to the operators. It is faster than any other conventional Drilling Machines & is also suitable for Drifting application in Sand Stone with compressive strength up to 600 kg/cm2 & Bolting purposes as well where angular/horizontal Drilling is required. Features Low noise silent operation Easy maintenance & lowest service cost Portable, light in weight, very easy to handle No electric connection required to be taken up to the face Water injection system helps in flushing cuttings, dust suppression & faster drilling Unique drive head design eliminates thrust load being transferred directly to the motor Can be used in various applications like Face Drilling Drifting, Angular Drilling etc

• Type: Straight Shank, Hex Shank
• Size: 0-2 mm
• Length (mm): 0-30 mm, 30-60 mm
• Thickness: 2-5 mm

We offer a wide range of Wagon Drill Machine which includes Pneumatic Wagon Drill, Slim Drill Machine and Wagon Drill Rig. By using high grade raw material, the Wagon Drill Machine is offered with the robust locking arrangement. The Wagon Drill Machine is fixed on wheels that help it to shift properly and able to drill holes from horizontal to vertical. Available in the diameter of 102-114 mm, Wagon Drill Machine is offered at affordable rates. The Wagon Drill Machine is suitable for blasting and drilling in cast mines. Highly rigid and stable, the Wagon Drill Machine can handle 76 mm diameter x 2 meters & 3 meter pipes. Features Stable drilling capabilitiesStructural designing for extra rigidityBase frame in box-constructionAnchoring arrangement to ensure perfect stability during drillingRear wheel swivel able by 90o to prevent movement during toe hole drillingEffectively braked wheels with hydraulic stabilizer in the front, holding the unit firmlyLocking arrangement between mast and boom provides extra rigidityEasy maneuverability - both in manual and self propulsion modesCentralized sensitive controls with auto feed arrangement ensure easy operation

• Hole ⌀: ⌀ 90 mm to ⌀ 150 mm
• Depth of hole - Vertical: 30 mtrs.
• Length of hole - Horizontal: 20 mtrs.
• Drill pipe size: ⌀ 76 mm
• Drill pipe length: 1.5 mtrs.
• Minimum centre length of hole from ground: 125 mm
• Weight (Appx.): 700 kg
• Height of rig: 3250 mm
• Width of rig: 600 mm
• Rotation unit: 4.5 HP
• RPM: 0 to 50

• Features: Corrosion resistant, Low maintenance, Optimum quality

  Atlas Copco's range of surface crawlers raises the quality of rock drilling to a new level. The lowest cost per tonne of rock produced comes from the higher productivity; straighter holes and better overall economy are designed into the range.

The semet pr30 piling rig is one of the most versatile soil engineering equipment manufactured by metco for driving of precast piles by hammering, in-situ casting of concrete piles using casing pipe & subsequent withdrawl of casing pipes. Metco industries however can offer piling rigs to suit any requirement of the customer to their need for existingnew site.

• Application: Mining
• Length: 60-100 mm
• Material: Stainless Steel

• Length: Customized
• Use: Drilling
• Features: Sturdy design, Anti-corrosion, Seamless finish

We are a leading Manufacturer and Supplier of Drill Rods. Our Drill Rods are manufactured using the best industrial grade material. The Drill Rods are majorly used in Construction companies and Mining companies that are involved in breaking different types of stones and rocks. Our Drill Rods are highly durable and possess high levels of strength. We supply the Drill Rods all across the country at competitive prices. Application Areas Construction industryMining industryQuarry industry Minimum Order Quantity : 3 pieces

JR offers to take away most of these discomforts by way of offering rental solution. With on site Concrete Mixing, Conveying & Transit solutions, JR offers a one stop solution to meet your project needs over its entire cycle.

• Brands: Asko
• Shank: 7/8"
• MOC: Shock resistant Steel
• Lenght: 4' to 12'
• Usage Application: Drilling

As New technology is rapidly percolating into the Construction Industry, URMILLA Enterprises Pvt. Ltd., has acquired the youngest fleet of the Hydraulic Rotary Piling Rigs to cater to the changing Piling and Foundation technology requirements in India. With Infrastructure Projects to be completed in the shortest possible time frame, we at URMILLA are confident that we can accommodate your Piling and Foundation needs and deliver the most cost-effective, value engineered solution. We are in the process of acquiring the best talent in the Piling and Foundation Industry, so as to take up Piling and Foundation Contract Works in the year 2011.

• Country of Origin: India
• Type: Drilled Screws

Products are manufactured to API Spec. 77-1 and API RP7G

Quick Overview:     Adjustable Steel Props : Steel tubes are used for inner & outer of props. Adjustment vs safe axial load given below for standard type Props.   Adjustable Floor Centres/Span : These Spans are suitable for providing supports for Shuttering and can be used to economise on the requirement of individual Props. These Spans are of telescopic construction and consist of an outer and inner member.   Floor Forms/Slab Shuttering : Floor Forms/Slab Shuttering are manufactured from 14/12 Gauge M.S. Sheets with pressed flanges and stiffeners with proper slots at the edges. Odd dimentions are filled up with the adjuster floor forms/slab shuttering.   Cup Lock System   Kwikstage System   U-Frame/H-Frame Scaffolding

• Features: Immaculate finish, Nominal price

hydraulic rotary drilling rig

pilling rig, Tower Cranes, vibro hammer

pilling rig, earth moving machinery parts, dozer dumper, Excavator

Drill Rods, Trimming Press, cold rolling mills, levelers, slitting lines

Wagon Drill, Pneumatic Tools, Hand Tool, Bosch hot air gun