Electric Cables Dealers in Esplanade, Kolkata

We are offering electrical cables. Frc connectors euro connectors card edge connectors rack & panel connectors pbt connectors powermate connectors `d’ type connectors bnc, tnc, sma, smb, uhf & coaxial connectors powerlock hcl connectors mini round shell mil grade ms3100 series coaxial cables - rg 585962213

L.D. BHATTAR & CO SOURCE TO ALL CABLE REQUIREMENTS Home About Us Products Enquiry Contact Us   Products|PTFE Insulated Heat Proof Cables PTFE INSULATED HEAT PROOF CABLESPTFE (Poly Tetra Fluoro Ethylene) is a polymer material, well-known these days. It has outstanding electrical, thermal and chemical properties.The operating temperature of PTFE is from - 65°C to 200°C for silver plated and - 65°C to 60°C for Nickel plated wires. Type ET (250V AC RMS), Type E (600V AC, RMS)and Type EE (1000V AC RMS) are manufactured strictly as per the specification of JSS 51004.ADVANTAGES: 1. Excellent thermal stability - suitable for use for- 65"C to 260"C. (2) Suitable for very wide frequency range (D.C. to above 10,000MHz) over wide temperature range. (3) Fire (flame) proof. (4) Inert to practically all chemicals even at elevated temperatures. (5) Smaller size, lighter weight and much higher reliability. (6) Lowest dielectric constant (2.1) dissipation factor (below .003) and highest volume and surface resistivities (in Teraohms). (7) Flex life - Excellent. (8) Non-contaminating. Non-toxic and bio-compatible. (9) Corona Resistance-Fair. (10) Cold-flow and cut through resistance - Fair, (good mechanical strength). (11) Resistance to ultra violet radiation and stress cracking-Excellent. (12) Soldering iron resistant and suitable for high density wiring. (13) Resistant to fungus and mould growth.APPLICATIONS: (1) Computers. (2) Refrigeration equipment. (3) Electronic test equipment (mobile and man pack wireless sets). (5) Electronic equipment for aircraft, Radar, navigation (6) Flight simulators. (7) Electronic control equipment for atomic energy satellite launching, ground control, reactor and process control, telephone exchange, lifts. (8) High performance motors, transformers and rectifiers (9) Temperature control valves; Furnace and oven wiring. (10) Load Cells and pressure transducers. (11) lnfra Red sensing equipments. (12) Air field lighting equipment. (13) Thermocouple and heat sensing leads. (14) Control panel wiring.

• Type: PVC Wires & Cables - Copper And Aluminium
• Brand Name: HARSH
• Application: Houses, Offices, Factory, Hospitals, Industry Etc.
• Conductor Material: Copper/Aluminium
• Insulation Material: PVC/FR/FRLSH
• Conductor Type: Copper/Aluminium
• Place of Origin: Kolkata (India)

We are offering pvc wires sizes available : 0.50 sqmm to 185 sqmm type : frfrlsh conductor : copperaluminium colour : redblackyellowbluegreen.

1KV cables are designed and manufactured based on the national (IS) & international (IEC, BS) standards and project based customer specifications. Following are the standard stages of cable design & manufacturing.

Elastomeric Cables are used in various sectors due to their excellent properties with standing harsh operating environments. These cables find applications in almost every sector of the economy like railways, wind farms, industrial infrastructure, petrochemical, Etc. Nishant has the capability to manufacture cables of varied elastomeric compounds like VIRTRS, EPDM, Silicone, CSP, PCP, NBR, EVA, Fluoroelastomers, Etc.

Aerial Bunched Cables are used for distributing to individual consumers by utility service providers like Electricity Boards, electricity distributing authorities. The cable is kept supported on poles.

Trend is moving towards using ABC cables in place of underground cable in power distribution network. ABC are much lighter, economically feasible and higher current rating of at least 10 % more than underground armoured cables. ABC are either Low Tension or High Tension Grade.ABC aluminium conductors are mainly XLPE insulated and each core are twisted round a aluminium alloy bare stranded conductors called MESSENGER. The Messenger conductor facilitates suspension of the cable on hooks and clamps in street lighting poles.   Hooking and pilferage of power is prevented. There is also vast advantage of continuous power supply in the event of storms and blizzards.Installation of AB Cable is simpler and much cheaper than the underground cables. Cable accessories are also cheap.The installation time is much less. ABC Cables are manufactured as per Indian Standards and Overseas Specification.    

We are offering elevator flat cable. 1. 0.5 sq mm1core, round 2. 4 sq mm 1core round 3. Digital cable, 0.25, 12c, flat 4. 0.5 sq mm 4core, flat, traveling 5. 0.5,sq mm 12c, flat, travelling 6. 0.75,4core, flat, travelling 7.0.75,12c, flat, travelling 8.0.75,16c, flat, travelling.

LT control cables A Steel Major mandated buyjunction for the procurement of 300 types (A, B & C category items) of Low Tension (LT) power and control (PVC, XLPE and EPR insulated) cables. The quantity requirement was 600 km per annum.

Armoured Optic Fiber Cable Standards        ISO : 11801IEC : 60793-1 / 60794 -1-2ITU-T : REC G.652DTelecordia : GR-20 Core        Mechanical & environmental Characteristics          Operating Temperature : -20 deg C   to +60 deg CStorage Temperature : -40 deg C   to +60 deg CJacket Material : LSZH  / HDPE    Outer Diameter : 9mm to 9.5 mm  +/-   0.3 mmJacket Thickness : 1.8  mm   +/-  0.2 mmPulling Tension     Short term : 2000 NLong Term : 1000NCrush Load : 3000 N/100mmBend Radius    Short term : 20DLong Term : 10D  

Highly compacted conductors to reduce AC losses which are due to skin and proximity effect.Purest insulation to bear thermal and thermo-mechanical stresses at continuous normal and short circuit temperature conditions Complete protection against most forms of electrolytic and chemical corrosion.Complete protection against most forms of electrolytic and chemical corrosion.Extruded inner sheath(for XLPE insulated power cable HT).Sequencial length marking on outer sheath of the cables.Over 90% armour coverage of armoured cables.

• Features: High tensile strength.

PVC coated wire mesh manufacturer, supplier & exporter from India. It is offering its products in a comprehensive range of designs & specifications. We are committed to offer the highest degree of quality in our products. That’s why we use superb quality raw materials while manufacturing our products. Our experienced team uses advanced machinery & cutting edge technology in order to maintain international quality standards in our products. In addition to this, we have also used PVC coating on our products so as to provide resistance against rust & corrosion.

• Features:: Flexible , High tensile strength and Fine finish

Assisted by our technically advanced facilities, we are capable to present a wide collection of Submersible Cable to the customers. Our Submersible Cable is highly accredited for its high strength, safe usage and optimum quality. Moreover, these cables are manufactured by using finest grade and pure virgin PVC.

• Flange Dia (mm) +/- 5mm: 350,400,500

Paper Insulated Copper Wires are the most commonly used wires for winding coils of transformers and other electrical equipment. We manufacture various types of (single double triple multiple) paper insulated copper wires, paper insulated copper strips, rectangular paper covered conductors, round paper covered conductor, multipapre covered copepr conductor in accordance with international standards as well as per customer's design requirements.

Product area application transformers, dry type transformer, stabilizers, welding transformers product range paper covered conductor : cross section area 10 mm to 75 mm nomex covered conductor : cross section area 10 mm to 75 mm packing : 50 kgs to 200 kgs.

In our online hot dip galvanising plant, we also producing Galvanised Steel Formed Wire also known as Galvanised Steel Flat Cable Armour Wire, which is primarily used by the Power Cable manufacturers and Telephone Cable manufacturers for armouring of cables. Manufacturing is under the license of Bureau of Indian Standards (BIS) All physical, mechanical and chemical tests are carried out by expert quality control work force ensuring superior quality of the products. Packing is done with utmost care to ensure no damages to the surfaces or the edges of the strips. Packing is mainly done by plastic wraps or else specifically specified by our customers. Size :: 4.0 X 0.80 mm Size :: 6.1 X 1.40 mm

low voltage cable, XLPE Cables, pvc insulated cable, wire roller

silicon rubber insulated cables, Teflon Insulated Heat Proof Cables

Aluminium Cables, Power Cable, Electric Cable

Electrical Cables, Cables, Pipes, Pumps, pumping station control panels