Electrical Insulator Dealers in Bow Barracks, Kolkata

Avail from us high quality Solid Core Line Post Insulator at competitive price range to suit the pockets of all our customers. Our range of Solid Core Line Post Insulator is well acclaimed by the clients owing to its high efficiency. Its high performance has led to its increase demand in the market. Attributes : Highly durable and reliableLong service lifeIt meets different specifications like ANSI: C 29.8 & C 29.1

• Color: White
• Application: Electrical Installation
• Material: Ceramic
• Tensile Strength: 10 KN
• Dry Arch Distance: 165mm

• Features: Sturdiness, Rust resistant, Accurate dimensions

We are offering insulator pin. Insulator pins are used along with cross arms and stay wires in the transformers and electricity lines. Ranging from 11kv, 22kv and 33kv, the insulator pins come in different weights from 950 gms to 2.7 kgs.

high tension ceramic insulators

• Color: customised
• Material: HIgh Alumina
• Condition: new
• Work Load Limit: Brown or Grey
• Bolt Type: RP
• Voltage Raging: 90 to 120kV

We are the leading supplier of this products. .

• Material: Ceramic
• Voltage: 220 V
• Phase: Three Phase
• Ambient Temperature: 0 to 50 C
• Humidity: 95%

• Color: Red
• Diameter: 35 mm - 60 mm
• Packaging Type: Box
• Targue Strength: 12ft Lbs
• Screw Material: Copper
• Height: 20 mm - 600 mm

the heating elements provided at hopper and support and shaft insulator play an important role. The heater in ESP hopper are provided to avoid clinker formation of the ash being collected at the bottom of ESP. Whereas the heaters provided at the shaft and support insulators are required to maintain the temperature above dew point which lies between 80-115 deg C. If temperature falls below the range as mentioned there will be a continuous tracking of electrical field over the surface of insulator which will result into damage of insulator and non availability of field for collecting the fly ash. We in Heatco after continuous R & D detected the importance of the Heating Elements for ESP and as per the requirement developed the Heaters for its smooth functioning. We are providing some of the types of heating elements provided at hopper and support and shaft insulator. There are others which can be made as per customers design to suit its application.

I am a supplier of electrical insulation material, refratories brick, rubber, Teflon, dmc molding item, glass Fibre item, lrb mat, ms item, sand, stone chips, gi net, chemical item, syndanio, Mika base item as per customer drawing & specification.

silicon rubber insulators, api intermediate, Poly Aluminium Chloride

Casing Insulator is a patented series of polyethylene insulators that are universally applicable in the installation of pipelines when the carrier pipe runs inside a casing. They are used to support the coated pipe within a tubular casing, to electrically insulate the pipe from the tubular casing and to prevent damage to the coated surface of the pipe when the pipe is installed within the casing.   SCOPE OF APPLICATION When the pipeline is buried in the ground, for instance, at underground road, river, railway and highway crossings, the pipeline is generally further protected by being enclosed within a tubular casing. The pipeline is supported within the casing by a Casing Insulator. The Casing Insulator, in addition to its supportive function, electrically insulates the pipeline from the casing. This insulative function is necessary for the cathodic protection of the pipeline, and also, for preventing electric current loss when the pipeline is used as a conduit for electrical cables. Furthermore, the Casing Insulator prevents damage to the outer coated surface of the pipeline when the pipeline is drawn through the casing during installation.   GENERAL FEATURES Casing Insulator is a high-density, polyethylene product, injection molded to provide low cost insulator of highest quality. It offers the following general features:   (i)       Easy Installation: Minimal coefficient of friction of the polyethylene material allows the carrier pipe to be more easily pulled through the casing thus helping in easy installation of the carrier pipe within the casing. (ii)      Cathodic Protection: Insulating properties like excellent dielectric resistance and low moisture absorption of the polyethylene material used ensures of meting with all the requirements of cathodic protection and yielding minimal electric current loss. (iii)    Coating Protection: High impact strength and excellent abrasion resistance of the polyethylene material prevents damage to the coated surface of the pipe when the pipe is installed within the casing and ensures long time resistance from chemical corrode minimizing cold flow of the coating on the carrier pipe. (iv)     Concentricity: Wide range of skid heights ensures the concentricity of the carrier pipe in the casing.   SPECIAL FEATURES Our Casing Insulator offers some specific features over traditional casing insulators.   (i)       Excellent Design: Designed and manufactured under the guidance of experts and engineers from Tsinghua University, Beijing University of Chemical Technology and China Petroleum Pipeline Bureau, Our Pipeline Casing Insulator are ensured of having highest quality, best design and excellent performance level meeting or exceeding industry standards. (ii)      Excellent Fastness: Reinforcement measures such as steel straps are used to fasten insulators firmly on the carrier pipe preventing slippage or looseness of the insulators and avoiding them from sliding along the carrier pipe. (iii)    Enhanced Coating Protection: On the inner wall of the Insulator, a rubber plate is affixed to enhance the coating protection of the pipeline and insuring the quality of the product as well as speeding up the construction process. (iv)     Quick Installation: Electric Wrench is supplied for quick installation, speeding up the construction process further and saving costs.    RECOMMENDED SPACING The general “rule of thumb” of the pipeline industry is to space Casing Insulators 8 to 15 ft apart. The recommended spacing for our Casing Insulator is to position two of the insulators at each end of the casing and then space the insulators 6 to 8 ft apart. Actual spacing may vary depending on local regulations and design specifications.   DIMENSIONS AND SPECIFICATIONS Casing Insulator is designed for use in most carrier pipes within casings and suitable for all pipe diameters from 38mm upwards. Wide range of skid heights is available to suit specific requirements. We also design and manufactureInsulators as per customer’s specific requirements.

esp s insulator, photocell sensors, cleaner nozzles, Photocell

Ceramic Insulators, thermocouple bare wires, Silicon Carbide Heating Elements

Solid Core Insulators, pin insurator, ct bushing, Ht Insulators

ESP Insulators, Mechanical Spares, electrical spare parts

hardwares;composite insulator; v cross arms;a b cable & access

dmc insulator, CARBON BRUSH HOLDER FOR CABLE REELING DRUM, smc busbar support

Electric Insulator, iron bolt, Steel Binding Wire, Cast Iron Bend Pipes

switch insulators

Electric Insulators, Electric Control Panel, Electric Connectors

cylindrical insulator, Wall through Bushings

Conical Insulator, Pull Cord Switch, mcc panel spares, guide support roller

Transformers

Polymer Products, Pipes, steel tubes fittings, polygonal poles

Earthing Pipe, hg fuse, Ab Switch, gi pin, Stay Set, gi flat

High Quality Transistor Mica Insulators, natural fabricated mica, mica paper

Polymer Products, moulded hoses, Nylon Products, mining machineries

Disposable Product, insulators fittings, Latex Examination Gloves