Electrical Wires Dealers in Bbd Bag, Kolkata

L.D. BHATTAR & CO SOURCE TO ALL CABLE REQUIREMENTS Home About Us Products Enquiry Contact Us   Products|PTFE Insulated Heat Proof Cables PTFE INSULATED HEAT PROOF CABLESPTFE (Poly Tetra Fluoro Ethylene) is a polymer material, well-known these days. It has outstanding electrical, thermal and chemical properties.The operating temperature of PTFE is from - 65°C to 200°C for silver plated and - 65°C to 60°C for Nickel plated wires. Type ET (250V AC RMS), Type E (600V AC, RMS)and Type EE (1000V AC RMS) are manufactured strictly as per the specification of JSS 51004.ADVANTAGES: 1. Excellent thermal stability - suitable for use for- 65"C to 260"C. (2) Suitable for very wide frequency range (D.C. to above 10,000MHz) over wide temperature range. (3) Fire (flame) proof. (4) Inert to practically all chemicals even at elevated temperatures. (5) Smaller size, lighter weight and much higher reliability. (6) Lowest dielectric constant (2.1) dissipation factor (below .003) and highest volume and surface resistivities (in Teraohms). (7) Flex life - Excellent. (8) Non-contaminating. Non-toxic and bio-compatible. (9) Corona Resistance-Fair. (10) Cold-flow and cut through resistance - Fair, (good mechanical strength). (11) Resistance to ultra violet radiation and stress cracking-Excellent. (12) Soldering iron resistant and suitable for high density wiring. (13) Resistant to fungus and mould growth.APPLICATIONS: (1) Computers. (2) Refrigeration equipment. (3) Electronic test equipment (mobile and man pack wireless sets). (5) Electronic equipment for aircraft, Radar, navigation (6) Flight simulators. (7) Electronic control equipment for atomic energy satellite launching, ground control, reactor and process control, telephone exchange, lifts. (8) High performance motors, transformers and rectifiers (9) Temperature control valves; Furnace and oven wiring. (10) Load Cells and pressure transducers. (11) lnfra Red sensing equipments. (12) Air field lighting equipment. (13) Thermocouple and heat sensing leads. (14) Control panel wiring.

• Features:: Flexible , High tensile strength and Fine finish

Assisted by our technically advanced facilities, we are capable to present a wide collection of Submersible Cable to the customers. Our Submersible Cable is highly accredited for its high strength, safe usage and optimum quality. Moreover, these cables are manufactured by using finest grade and pure virgin PVC.

In our online hot dip galvanising plant, we also producing Galvanised Steel Formed Wire also known as Galvanised Steel Flat Cable Armour Wire, which is primarily used by the Power Cable manufacturers and Telephone Cable manufacturers for armouring of cables. Manufacturing is under the license of Bureau of Indian Standards (BIS) All physical, mechanical and chemical tests are carried out by expert quality control work force ensuring superior quality of the products. Packing is done with utmost care to ensure no damages to the surfaces or the edges of the strips. Packing is mainly done by plastic wraps or else specifically specified by our customers. Size :: 4.0 X 0.80 mm Size :: 6.1 X 1.40 mm

Product area application transformers, dry type transformer, stabilizers, welding transformers product range paper covered conductor : cross section area 10 mm to 75 mm nomex covered conductor : cross section area 10 mm to 75 mm packing : 50 kgs to 200 kgs.

• Flange Dia (mm) +/- 5mm: 350,400,500

Paper Insulated Copper Wires are the most commonly used wires for winding coils of transformers and other electrical equipment. We manufacture various types of (single double triple multiple) paper insulated copper wires, paper insulated copper strips, rectangular paper covered conductors, round paper covered conductor, multipapre covered copepr conductor in accordance with international standards as well as per customer's design requirements.

• Features: High tensile strength.

PVC coated wire mesh manufacturer, supplier & exporter from India. It is offering its products in a comprehensive range of designs & specifications. We are committed to offer the highest degree of quality in our products. That’s why we use superb quality raw materials while manufacturing our products. Our experienced team uses advanced machinery & cutting edge technology in order to maintain international quality standards in our products. In addition to this, we have also used PVC coating on our products so as to provide resistance against rust & corrosion.

Elastomeric Cables are used in various sectors due to their excellent properties with standing harsh operating environments. These cables find applications in almost every sector of the economy like railways, wind farms, industrial infrastructure, petrochemical, Etc. Nishant has the capability to manufacture cables of varied elastomeric compounds like VIRTRS, EPDM, Silicone, CSP, PCP, NBR, EVA, Fluoroelastomers, Etc.

• Conductor: Bare/tinned annealed copper
• Insulation: PVC/ PE
• Shielding: Individual /Overall Shielded with aluminium tape (Polyster backed) or Bare/Tinned copper wire braiding
• Outersheath: PVC
• Sizes: 0.4/0.5/0.6/0.7/0.8/0.9 mm dia conductors available in 1 pair to 50 pair
• Standard: TEC Specification G/WIR 06/02

To cater the growing need of telecommunication, Tamra presents Tamra Telephone Cables as a fulfillment of our commitment to quality and performance Tamra Telephone cables are among the best in industry and meet various national and international standard requirements.   Applications For telecom data transmission in telephones, Intercoms, EPBAX, FAX, Close circuit security system, Residential / Industrial telephone line. Salient Features Specially formulated hard grade PVC, is used for insulation. This PVC not only gives long life and better stability to cable but also has high electric properties to minimize losses and disturbances. Distinct Colour Coding System as per TEC. Pairs having staggered lay especially the adjacent one to minimize the cross talk. Precise and controlled sizing and process is done for conductor and insulated cores with all automatically controlled machines to attain the perfect and optimum value of capacitance, attenuation and impedance. Shielding is provided as optional feature, to avoid external as well as inter pair interferences, when the cables are used for specific needs.  

1KV cables are designed and manufactured based on the national (IS) & international (IEC, BS) standards and project based customer specifications. Following are the standard stages of cable design & manufacturing.

We engineer high performance glass braided copper cables available in different range to meet the client's specifications. Our vast stock capacity ensures cost effective solution while maintaining the quality. Our range of glass braided copper cables are also available with BDV of 6 KV are used in coil winding of transformers & motors. Design features: Dielectric Strength Moisture absorption and dimensional stability Ease of fabrication and maintaining tolerances

• Brand Name: KEI 
• Number Of Cores: 3, 3.5
• Usage/Application: Industrial
• I Deal In: New Only
• Flame Retardant: Yes
• Heat Resistance: Yes

• Type: Multicore Cables
• Application: Home, Industrial
• Color: black
• Feature: Crack Free, High Ductility, High Tensile Strength, Quality Assured
• Outer Material: Nitrile Rubber
• Internal Material: Copper

    Our company is reputed as trader in the industry and situated in the well-connected area of Kolkata (India). To provide our buyers with premium products, we make sure only superior grade materials are used for manufacturing them. We use PVC and rubber as the insulating material within our aluminium cables.  

• Type: Armoured Cables
• Certification: CE Certified
• Color: Black, Green, Red, White, Yellow
• Voltage: 110V, 220V
• Application: Home, Industrial
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Feature: Crack Free, Durable, Heat Resistant, High Tensile Strength, Quality Assured
• Outer Material: Neoprene Rubber, Silicone Rubber
• Internal Material: Aluminium
• Thcikness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 3.5-4mm, 4.5-5mm, 5.5-6mm, 6.5-7mm, 7.5-8mm, 8.5-9mm, 9.5-10mm

The Copper Cables offered by us are suitable for every high current application. Our line of water-cooled Copper Cables range from a standard resistance welding wj to the most advance high frequency coaxial design on the market. Although we have standard products available, most Copper Cables are custom designed and sized to meet the exacting customer requirements. Clients can avail durable, flexible and high strength Copper Cables from us at best prices.

• Temperature Range: -50 deg C to +180 deg C
• Temperature Range: -30 deg C to +250 deg C
• Rated voltage: Up to 1100 volts
• Test voltage: 3000 volts for 5 minutes
• Insulation Resistance: 20 M ohm / kilometre at 20 degree centigrade
• Applications: EOT Cranes, Ship wiring, Airport lighting and Aircraft wiring

Copper / Aluminium conductor XLPE Insulated, unarmoured / Armoured, HR- PVC, FRLS sheathed cables IS : 7098/P-1 1c × 1000 SQ.MM 4c × 400 SQ.MM 61C × 2.5 SQ.MM   Copper / Aluminium conductor Type-A PVC insulated (General purpose - 70C unarmored /armored, ST-1 PVC sheathed cables IS : 1554/P-1 1c × 1000 SQ.MM4c × 400SQ.MM 61c × 2.5SQ.MM   Copper / Aluminium conductor HR-PVC insulated, unarmoured/armored, ST-1/ST-2 FRLS PVC sheathed cables IS : 1554/P-1 4c × 400 SQ.MM61c × 25SQ.MM   Copper / Aluminum conductor Type A/HR-PVC insulated, unarmored/armored, ST-1/ST-2, FRLS PVC Sheathed Cables IS : 1554/P-1 1c × 1000 SQ.MM4c × 400 SQ.MM61c × 2.5 SQ.MM

The Silicon Rubber Cables are used in the generation & Transmission of electricity. When exposed to fire, the silicon offers circuit integrity, low smoke evolution and freedom halogen acids. They are commonly used in steel mills, petrochemical industries, paper and pulp industries and Nuclear and Thermal stations and also in airport lighting.

Trend is moving towards using ABC cables in place of underground cable in power distribution network. ABC are much lighter, economically feasible and higher current rating of at least 10 % more than underground armoured cables. ABC are either Low Tension or High Tension Grade.ABC aluminium conductors are mainly XLPE insulated and each core are twisted round a aluminium alloy bare stranded conductors called MESSENGER. The Messenger conductor facilitates suspension of the cable on hooks and clamps in street lighting poles.   Hooking and pilferage of power is prevented. There is also vast advantage of continuous power supply in the event of storms and blizzards.Installation of AB Cable is simpler and much cheaper than the underground cables. Cable accessories are also cheap.The installation time is much less. ABC Cables are manufactured as per Indian Standards and Overseas Specification.    

• Type: Armoured Cables
• Certification: ISO 9001:2008
• Color: Black, Green, Red, Yellow
• Voltage: 110V, 220V
• Application: Industrial
• Power: 1-3kw, 3-6kw, 6-9kw
• Feature: Durable, Heat Resistant, High Ductility, High Tensile Strength, Quality Assured
• Internal Material: Aluminium
• Thcikness: 1.5-2mm, 2.5-3mm

Backed by a long and rich industrial experience, we have been able to trade a qualitative range of Aluminium Unarmoured Cables. Our principle company use high-grade raw material and implicate most advanced technologies to manufacture our range of Aluminium Unarmoured Cables… These are made available to our clients in variegated technical specifications within a stipulated time frame. These cables are used for indoor movable installation in dry locations. Table I: 1.5 sq mm, Solid Copper Conductor, PVC Sheathed, Unarmoured / Armoured, Multicore Control Cables – 650/1100 Volts

These are made from high strength Aluminium Magnisium Silicon Alloy . The All Aluminium Alloy Conductor are having lighter weight, high strength and high current carry capacity, lower electrical losses and superior corrosion resistance.

PVC Coated GI Wire offered by us, is known for its qualitative features such as durability and high strength among the clients. This PVC Coated GI Wire has the coating that resists the heat from sunlight and helps the creepers like vanilla to grow better. We are the trusted Manufacturer and Supplier of PVC Coated GI Wire.

Construction: * solid stranded annealed copper conductor & tinned bare * general purpose hr pvc insulation * cores laid up (filled if needed) * frls general purpose pvc inner sheath.

We supply low tension cables according to national and international standards and to individual specifications for our customers. In the 0.65 kv - 1.1 kv range, the most commonly required cables are always in stock or production, guaranteeing availability. Cables with aluminium or copper conductors

• Color: Black
• Voltage: 1100 V
• Conductor Material: Aluminum
• Jacket: Rubber 
• Temperature Range: -40 to +105 C

Sinha Electric have vast experience and a largest stockiest of Armoured Cable in Kolkata

PVC Insulated & Sheathed Three Core Flat Cables as per IS 694/2010 are used to connect submersible pump motor with supply lines, these cables are made keeping in mind the severe operating conditions. The slot available in the tube well being narrow the shape of the cables has to be suited for such an application. Application Area 1) PVC insulated & sheathed flexible Three Core Flat cables are used to connect underwater Submersible Pumpsets with supply line.2) Agriculture, Irrigation, Domestic Installation, Outdoor application & Power Supply.3) The outer sheath of the cable being made of special grade Abrasion resistant PVC makes it impervious to water, grease, oil, etc making cables highly durable. Cable Structure1) Plain Copper conductor extra fine stranded & bunched in accordance to IS 8130/1984 for higher flexibility2) Each of the cores are insulated with PVC Compound for better insulation resistance against water and moisture.3) Cores are laid in flat parallel manner and sheathed for highest performance in severe & difficult conditions.4) Marking of brand name, cross-section ISI License No. & Logo on each mtr.5) Testing of cable carried out as per IS 694/2010 at our In House facility.

• Type: Ship Wiring Power Cables
• Certification: CE Certified
• Color: Black, Red, White, Yellow
• Outer Material: Neoprene Rubber, Rubber, Silicone Rubber
• Internal Material: Copper
• Minimum Order Quantity: 500 Meter

LT control cables A Steel Major mandated buyjunction for the procurement of 300 types (A, B & C category items) of Low Tension (LT) power and control (PVC, XLPE and EPR insulated) cables. The quantity requirement was 600 km per annum.

• Type: Polycab Cables
• Color: Black, Green, Red, White, Yellow
• Voltage: 110V, 220V, 380V, 440V
• Application: Home, Industrial
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Feature: Crack Free, Durable, Heat Resistant, High Ductility, High Tensile Strength, Quality Assured
• Outer Material: Neoprene Rubber, Rubber, Silicone Rubber
• Internal Material: Aluminium, Copper
• Thcikness: 0.5-1mm, 1.5-2mm, 2.5-3mm, 4.5-5mm, 5.5-6mm, 6.5-7mm, 7.5-8mm, 8.5-9mm, 9.5-10mm