Electrical Wires Dealers in Salt Lake, Kolkata

We are offering elevator flat cable. 1. 0.5 sq mm1core, round 2. 4 sq mm 1core round 3. Digital cable, 0.25, 12c, flat 4. 0.5 sq mm 4core, flat, traveling 5. 0.5,sq mm 12c, flat, travelling 6. 0.75,4core, flat, travelling 7.0.75,12c, flat, travelling 8.0.75,16c, flat, travelling.

LT control cables A Steel Major mandated buyjunction for the procurement of 300 types (A, B & C category items) of Low Tension (LT) power and control (PVC, XLPE and EPR insulated) cables. The quantity requirement was 600 km per annum.

L.D. BHATTAR & CO SOURCE TO ALL CABLE REQUIREMENTS Home About Us Products Enquiry Contact Us   Products|PTFE Insulated Heat Proof Cables PTFE INSULATED HEAT PROOF CABLESPTFE (Poly Tetra Fluoro Ethylene) is a polymer material, well-known these days. It has outstanding electrical, thermal and chemical properties.The operating temperature of PTFE is from - 65°C to 200°C for silver plated and - 65°C to 60°C for Nickel plated wires. Type ET (250V AC RMS), Type E (600V AC, RMS)and Type EE (1000V AC RMS) are manufactured strictly as per the specification of JSS 51004.ADVANTAGES: 1. Excellent thermal stability - suitable for use for- 65"C to 260"C. (2) Suitable for very wide frequency range (D.C. to above 10,000MHz) over wide temperature range. (3) Fire (flame) proof. (4) Inert to practically all chemicals even at elevated temperatures. (5) Smaller size, lighter weight and much higher reliability. (6) Lowest dielectric constant (2.1) dissipation factor (below .003) and highest volume and surface resistivities (in Teraohms). (7) Flex life - Excellent. (8) Non-contaminating. Non-toxic and bio-compatible. (9) Corona Resistance-Fair. (10) Cold-flow and cut through resistance - Fair, (good mechanical strength). (11) Resistance to ultra violet radiation and stress cracking-Excellent. (12) Soldering iron resistant and suitable for high density wiring. (13) Resistant to fungus and mould growth.APPLICATIONS: (1) Computers. (2) Refrigeration equipment. (3) Electronic test equipment (mobile and man pack wireless sets). (5) Electronic equipment for aircraft, Radar, navigation (6) Flight simulators. (7) Electronic control equipment for atomic energy satellite launching, ground control, reactor and process control, telephone exchange, lifts. (8) High performance motors, transformers and rectifiers (9) Temperature control valves; Furnace and oven wiring. (10) Load Cells and pressure transducers. (11) lnfra Red sensing equipments. (12) Air field lighting equipment. (13) Thermocouple and heat sensing leads. (14) Control panel wiring.

The Copper Cables offered by us are suitable for every high current application. Our line of water-cooled Copper Cables range from a standard resistance welding wj to the most advance high frequency coaxial design on the market. Although we have standard products available, most Copper Cables are custom designed and sized to meet the exacting customer requirements. Clients can avail durable, flexible and high strength Copper Cables from us at best prices.

• Voltage: 1100 V
• Temperature range: -55 degree centigrade to 90 degree centigrade Continuous
• Rated voltage: Upto 1100 volts
• Insulation Resistance: 20 Megohms / Km at 20 deg C

Trend is moving towards using ABC cables in place of underground cable in power distribution network. ABC are much lighter, economically feasible and higher current rating of at least 10 % more than underground armoured cables. ABC are either Low Tension or High Tension Grade.ABC aluminium conductors are mainly XLPE insulated and each core are twisted round a aluminium alloy bare stranded conductors called MESSENGER. The Messenger conductor facilitates suspension of the cable on hooks and clamps in street lighting poles.   Hooking and pilferage of power is prevented. There is also vast advantage of continuous power supply in the event of storms and blizzards.Installation of AB Cable is simpler and much cheaper than the underground cables. Cable accessories are also cheap.The installation time is much less. ABC Cables are manufactured as per Indian Standards and Overseas Specification.    

• Features:: Flexible , High tensile strength and Fine finish

Assisted by our technically advanced facilities, we are capable to present a wide collection of Submersible Cable to the customers. Our Submersible Cable is highly accredited for its high strength, safe usage and optimum quality. Moreover, these cables are manufactured by using finest grade and pure virgin PVC.

1KV cables are designed and manufactured based on the national (IS) & international (IEC, BS) standards and project based customer specifications. Following are the standard stages of cable design & manufacturing.

We are offering electrical cables. Frc connectors euro connectors card edge connectors rack & panel connectors pbt connectors powermate connectors `d’ type connectors bnc, tnc, sma, smb, uhf & coaxial connectors powerlock hcl connectors mini round shell mil grade ms3100 series coaxial cables - rg 585962213

• Features: High tensile strength.

PVC coated wire mesh manufacturer, supplier & exporter from India. It is offering its products in a comprehensive range of designs & specifications. We are committed to offer the highest degree of quality in our products. That’s why we use superb quality raw materials while manufacturing our products. Our experienced team uses advanced machinery & cutting edge technology in order to maintain international quality standards in our products. In addition to this, we have also used PVC coating on our products so as to provide resistance against rust & corrosion.

• Material: PVC
• Shape: Flat(Rectangle)
• Color: Orange
• Brand: Vipassana
• Cable Type: Elevator Cable
• Packing Type: Coil

Elastomeric Cables are used in various sectors due to their excellent properties with standing harsh operating environments. These cables find applications in almost every sector of the economy like railways, wind farms, industrial infrastructure, petrochemical, Etc. Nishant has the capability to manufacture cables of varied elastomeric compounds like VIRTRS, EPDM, Silicone, CSP, PCP, NBR, EVA, Fluoroelastomers, Etc.

• Brand Name: DIGI LINK
• Place of Origin: West Bengal, India

Aerial Bunched Cables are used for distributing to individual consumers by utility service providers like Electricity Boards, electricity distributing authorities. The cable is kept supported on poles.

LT Power and control Cable with XLPE Insulation of Voltage grade upto 1.1 Kv conforming to Indian and various International Standards.XLPE means crosslinked Polyethylene. The compound is based on high molecular weight polymer. High degree of crosslinking is attained in the processed form and thus attains excellent electrical and mechanical properties.

Multicore Industrial Cables, which we offer, are manufactured using the best-grade materials that are sourced from reliable Vendors in the domain. We are among the dependable Manufacturers, Suppliers and Exporters of Multicore Industrial Cables, based in Kolkata- West Bengal. These Multicore Industrial Cables at the market leading rates.   Note : Prices are subject to change due to LME prices and Dollar fluctuations, please inquire the latest prices.

Product area application transformers, dry type transformer, stabilizers, welding transformers product range paper covered conductor : cross section area 10 mm to 75 mm nomex covered conductor : cross section area 10 mm to 75 mm packing : 50 kgs to 200 kgs.

Abc Cable, Power Transmission Equipment

In our online hot dip galvanising plant, we also producing Galvanised Steel Formed Wire also known as Galvanised Steel Flat Cable Armour Wire, which is primarily used by the Power Cable manufacturers and Telephone Cable manufacturers for armouring of cables. Manufacturing is under the license of Bureau of Indian Standards (BIS) All physical, mechanical and chemical tests are carried out by expert quality control work force ensuring superior quality of the products. Packing is done with utmost care to ensure no damages to the surfaces or the edges of the strips. Packing is mainly done by plastic wraps or else specifically specified by our customers. Size :: 4.0 X 0.80 mm Size :: 6.1 X 1.40 mm

• Length: Up to 50 Meter
• Voltage: Up to 220 V
• Number of core: Up to 4
• Frequency Hertz: 50
• Minimum Order Quantity: 305 Meter

• Flange Dia (mm) +/- 5mm: 350,400,500

Paper Insulated Copper Wires are the most commonly used wires for winding coils of transformers and other electrical equipment. We manufacture various types of (single double triple multiple) paper insulated copper wires, paper insulated copper strips, rectangular paper covered conductors, round paper covered conductor, multipapre covered copepr conductor in accordance with international standards as well as per customer's design requirements.

• Conductor: Bare/tinned annealed copper
• Insulation: PVC/ PE
• Shielding: Individual /Overall Shielded with aluminium tape (Polyster backed) or Bare/Tinned copper wire braiding
• Outersheath: PVC
• Sizes: 0.4/0.5/0.6/0.7/0.8/0.9 mm dia conductors available in 1 pair to 50 pair
• Standard: TEC Specification G/WIR 06/02

To cater the growing need of telecommunication, Tamra presents Tamra Telephone Cables as a fulfillment of our commitment to quality and performance Tamra Telephone cables are among the best in industry and meet various national and international standard requirements.   Applications For telecom data transmission in telephones, Intercoms, EPBAX, FAX, Close circuit security system, Residential / Industrial telephone line. Salient Features Specially formulated hard grade PVC, is used for insulation. This PVC not only gives long life and better stability to cable but also has high electric properties to minimize losses and disturbances. Distinct Colour Coding System as per TEC. Pairs having staggered lay especially the adjacent one to minimize the cross talk. Precise and controlled sizing and process is done for conductor and insulated cores with all automatically controlled machines to attain the perfect and optimum value of capacitance, attenuation and impedance. Shielding is provided as optional feature, to avoid external as well as inter pair interferences, when the cables are used for specific needs.  

• Type: Ship Wiring Power Cables
• Certification: CE Certified
• Color: Black, Red, White, Yellow
• Outer Material: Neoprene Rubber, Rubber, Silicone Rubber
• Internal Material: Copper
• Minimum Order Quantity: 500 Meter

Danger plate,Stay set,Hardware fitting,Insulator as per drawing specification or sample up to 400 kV ,Discharge rod, Safety item such as Helmet,safety belt,Hand Gloves etc.

silicon rubber insulated cables, Teflon Insulated Heat Proof Cables

Electrical Control Cables

Electrical Cables, Solar Hybrid Inverter, Solar Photovoltaic Panel

armouring wires, flexible cable armouring wires, umbrella rib wires

LT Cables, Engineering Consultants, Web Designing Services, Ht Cables

underground cables, Electronic Items, Light Fittings, Cable Jointing Kits