EOT Crane Dealers in Kolkata

• Application: Industrial
• Color: Yellow
• Feature: Capable For Load, Heavy Weight Lifting
• Capacity: 5-10 ton
• Max Height: 20-40 feet
• Finish: Painted

We are offering single girder eot crane, m.n. Cranesis manufacturer, supplier & exporters of extensive range of material handling cranes & equipments since 1988. We do production quality, cheap price cranes like e.o.t. Crane, single girder eot crane, double girder eot cranes, hot cranes, jib cranes, gantry cranes, single beam eot cranes, double beam eot cranes, overhead crane, overhead bridge cranes, we do quality production customized cranes according to clients requirements. technical specification 1.the control box surface has been treated with preservatives. 2.ambient temperature:.

We are a giant Manufacturer and Supplier of Double Girder EOT Crane in West Bengal, India. Double Girder Crane is used in the application of lifting the heavy loads, which may weigh up to 20 T and also for transporting such heavyweights including the span of 30m and more than that. This Overhead EOT Double Girder Crane is compatible with wide pans and heavy weights. These double EOT Cranes are useful in lifting heavy loads that cannot be done by normal cranes. These Overhead EOT Double Girder Cranes come with the following abilities: o 0.5 Ton to 20 Ton Capacity of 3 m to 15m Span and of 0.5 m to 35m Lift Different raw materials like I-beam, MS Sheets, brakes and more are used in making Overhead EOT Double Girder Crane .

We are offering eot cranes double girder single girder up to 100t electric hoists- 1t -20t electric winches- 1t-20t gantry jib goliath cranes shrouded bus bar.

Goliath cranes are used in places where fabricating overhead runways would be a costly affair, lengthy and difficult to maintain the alignment. It runs on rails mounted on ground and can be moved to new locations relatively easier than overhead cranes. However, Goliath cranes are expensive due to more usage of steel but they save on the cost of overhead runway. Applications: Ports Stockyards and scrapyards Construction sites Railway yards

We are offering used eot crane. We are one of the leading service providers for selling idle plants & used machineries. we want to sell one 15 mt used eot crane. capacity – 15 ton, span – 56’/17 mtr load – 19ton, deflection – 5/16” and ¼” p.panel – toshiba – 600a hoist panel – 57.5 hp, 400a, type mdr 34c bridge panel – 57.5 hp, 400a, type idr 31c trolley panel – 12 hp, 100a, type mdr 31c master controller – type dm22 tykyo lifting magnet – type dma limit switch – youngstown l/sw resistance – 215a, 1.05ohm, 57.5 hp brakes – hoist, square – d, 16”series motors: hoist ds 610, 57.5hp, 230v, 219a, 470 rpm bridge – ds 610, 57.5hp, 230v, 219a, 470 rpm trolley – ds 603, 12hp, 230v, 515a, 670 rpm rope dia – 7/8”(22mm) machine is in good working condition located in a plant in jamshedpur.

STRUCTURE The bridge will consist of two main girders of plate/box type welded and bolted construction. Suitable rail will be provided. A chequered plate will be provided full length of one side of the bridge. The platforms will have hand railling of approximately a meter high with a top rail, intermediate rail and toe guard. Substantial steel and stop will be provided at each end of the crane bridge securely attached the main girder. END CARRIAGES The end carriage will be bolted and welded type of fabricated steel construction using rolled section and or plates. Rubber buffer will be provided at the four corners. CRAB The crab frame will be of fabricated steel construction, welded and bolted with hoisting and cross travel motor, brakes, Gearbox, drums, electricals etc. Mounted on it. The rope drum will be machine cut Grooves and mounted on antifriction bearings. Rubber buffers will be provided at the four corners. WELDING Welding will be in accordances with IS:816-1956 and would eminently suitable for the duty required. Welding would be by hand electric arc. Our design would ensure avoidance of welding at critical points and all welds would be under low stress. WHEELS The wheels for end carriage and crab Wheels will be of carbon steel En 9 hardened and tempered double flanged running on antifriction bearings. GEARING The gears and pinion shall be made of carbon/alloy steel. They are mounted on steel shafts,  running on ball bearings. The gear box will be of cast iron/fabricated steel construction with oil bath lubrication. Input pinion shall be EN 24, hardened & tempered and other gears and pinions shall be of EN9. BRAKES Unless otherwise described specially E.H.T or Electro magnet brakes of the solenoid release type will be provided for the controlling of different motors. When the current will bring the motions safety and the brake will bring the motions safety and autometically to a rest. RESISTANCE BOXES Punched grid stainless steel resistance boxes shall be of 10 minutes rating as per IS:3177. HOOK BLOCK MAIN HOIST & AUXILIARY HOIST Hook for the main hoist shall be of c-type of shape and section as indicated in relevant BS/IS Standered. The hook shall be steel forget. The hook shall be of swivelling type with thrust bearings. The block shall be of fabricated construction. Rope pulley will be of fabricated steel works of carbon steel, with rope grooves accurately machined. The pulley will be providded  with the plain bearings and have suitable rope guards. PULLEY FITTED ON CRAB In case of the number of falls of rope being more than two, pulley shall be fitted on crab frame also. The pulley will be fabricated steel work of carbon steel. It will have rope grooves accrately machined.

Our clients can avail an extensive range of Single Grider EOT Cranes, which is fabricated in strict compliance with international quality standards. Acknowledged for their robust construction, reliability and efficiency, these cranes find extensive usage in automobiles and engineering industries. Available in various capacities, heights and sizes, our custom designed cranes are offered at competitive prices.

used eot cranes, Hand Winch, used shaper machine, used slotting machine

EOT Cranes, Electric Winches, Sinking Winches, grab buckets

EOT Cranes, Conveyor, Electric Winch, Engineering Equipment, Goliath Cranes

EOT Cranes, electric rope winch, Gantry Crane, Electric Hoists

EOT Cranes, magnetic head products

EOT Cranes, Winches, Chain Pulley Block, Material Handling Equipment

Jib Crane, Hoist, Overhead Crane, HOT Crane

mechanical machine spare, Fabrication Equipment, Pressure Vessels

mechanical instrument, Diesel Generating Sets, Transformer