Industrial Battery Chargers Dealers in Kolkata

• Type: Turbo Charger
• Application: Charging
• Weight: 0-500gm, 500-1000gm
• Color: Metallic
• Frequency: 0-500Mhz
• Warranty: 1year

We have advanced packaging systems available to make sure that the products are packed using the experts approved packaging stuff. We source the material from the leading vendors in the industry. With our brilliant logistics network, we are capable to deliver the orders within the postulated time frame. Features: •  Compact design •  Longer working life

With the assistance of our team of professionals, we are engaged in providing an excellent quality AC DC Battery Charger. Our offered battery charger is manufactured utilizing high grade components and innovative technology in line with industry norms. So as to maintain the quality, this charger is strictly tested on different parameters by our quality examiners. Apart from this, provided battery charger can be availed at budget friendly prices by our clients.   Features : Optimum performance High strength Low power consumption   Other Details : Soft Start Output No-delay change-over from mains to battery and battery to mains Automatic Boost/Trickle mode change-over Reverse Polarity Protection Built in EMI/RFI filter for noise suppression Suitable for EPBAX systems based on C-DOT, OKI, JEUMONT SCHNEIDER, GTE and all International Technologies   Input : Mains 230V (1PH) / 415V (3PH) ±15%  AC 50 Hz Ibattery 45 to 53.75 Volts. DC   Output : Load Selectable between 48 to 56 Volts DC - Typical Charger Boost Mode : 57.6 Volts Float Mode 51.6 Volts Regulation ± 1.5 Volts Ripple < 100 mV (peak-to-peak) with battery Psophometric Noise : < 2 mV with battery, on speech load (800 Hz) Over-all Efficiency : > 70% under all conditions Visual Indications : Mains ON, High / Low input voltage cutout High / Low charger voltage cutout, batter Boost / Float mode, Battery Low Audio Alarm: Battery Low and System Failure   Specifications : Input Voltage : 12V Output Power : 401 - 500W Output Current : 2.3A

Being a blue-chip firm in this arena, we have set strong tie-ups with the leading e-commerce merchants who work for us and guarantee safe and secure transactions. Hailing from Barasat(India), our company is engaged for years in providing the best grade products in the industry.

• Brand: TATA
• Type: 7 KW
• Color: BLACK

WE OFFER TATA MAKE EV CHARGER 

We offer transformer(dry type)-from 50va to 200kva,3ph & 1ph.(as per is2026) electronic battery charger(float cim boost)-upto150a suitable for telecommunication,power sector & industrial sector. Solar inverter-upto 25kva, 3ph & 1ph distribution panel board-as per customer's spec.

• Weight: 10-20kg
• Voltage: 110V
• Power: 1-3kw
• Type: Normal Automatic Battery Charger
• Warranty: 1Year
• Battery Capacity (Ampere Hours): 24V - 20 AMPERE DC

Two wheeler battery charger The defective battery arising out of the free replacement or pro-rata settlement under this warranty will become the property of the Company and no scrap rebate will be given for it.

• Mains Supply: 230 V AC +/- 10 % 50 Hz.
• Battery Volts: 6-72 volts

AC supply is stepped downed using heavy duty copper double wound transformer and rectified with full wave bridge rectifier. Out put volts and current are selectable by respective selector switches. Amp and Volt meters are provided for instant monitoring. Input AC and out put DC fuses are provided.These chargers are most suitable for battery charging shops, maintenance shops, repair shops etc. where number and size of batteries may regularly vary.

• Brand Name: Big Bull
• Warranty: 1 Years
• Vehicle Type: E Rickshaw
• Current: 20 - 25 Amp
• Size: 350 x 275 x 210 mm
• Material: Mild Steel
• Feature: Portable
• Phase: Single Phase
• Frequency: 50 Hz

We are offering battery charger. function: digital universal automatic battery charger are designed to charge almost all type of batteries. Be it lead acid,sealed maintenance free, nickad it can charge. It can charge from single cell to 36 v battery bank. charging rate can be set from 2 amps to 25 amps. These chargers are suitable for defense stations,transport depot etc. volt selector switch facilitates selection of battery volt from 2 volt to 36 volt. The charger has auto/manual selector switch. In auto mode, charger selects boost / trickle mode as per condition of battery. Manual mode can charge battery by set amps. This is useful features to boost charge deeply discharged battery. Timer is provided to set charging time in manual mode. Mcb for input and output are provided on front panel. The system has heavy duty double wound transformer, full wave bridge rectifier, over load control, protection against battery reverse connection.temperature protection for over heating of rectifier is provided. these chargers are housed in 19" rack mountable cabinets. These can be stacked to form any number of charger racks. technical specifications: type of equipment : battery charger- automatic input voltage range : 170 - 270 v. supply : single phase, 50 hz. +/- 2 hz. output volts : 2-36 volts. ( 2-6-12-24-30-36 v : fine voltage setting by knob output current : 25 amps max : fine current setting by knob. auto / manual : selection by rotary switch. timer : for manual mode. 1 to 12 hours. regulation : +/- 2.5 % instrumentation : digital volt meter for output volts. : digital amps meter for output current. switches : system on/ off : volt selector switch 6 way rotary type indications : mains on : boost : trickle : battery reverse : over load : over temp. mcbs : dp 10 amps for mains : dp 32 amps for output output terminals : red & black on front panel.

• Warranty: 1 Year
• Battery Type: Lead Acid
• Control: CC/ CV close loop
• Input Protection: MCB for Mains incoming supply
• Brand Name: bps
• Aux: 415V. AC ( 3 Phase)
• Out put: 30 V
• Operation: Auto/Manual
• Rectifier: Full wave half controlled bridge
• Optional: Fuse protection for each rectifier element

Industrial Battery Chargers – KSP Power Controls has been a valued supplier to couple of customers for their customized requirement on Industrial Battery Chargers in India. These Industrial Battery Chargers are being used along with couple of Equipments which require DC voltage to run them and once Batteries get discharged the same needs to be brought back to station for Charging and restage. It has been designed CVCC (Constant Voltage Constant Current Chargers ) for such applications wherein customer can use Sealed Batteries Also and enjoy the luxury of using product with best of the life from Batteries. KSP Power Controls Battery chargers can also be used for UPS applications where in majorly all Multinational UPS manufacturers Have 4 amps chargers for sizing up to 10KVA UPS systems. Customers who look for larger backups need additional Charger to charge batteries which becomes a big issue for End customers. We have ensured that customers can feel Comfortable technically by adding additional charger along with their UPS and procure batteries of higher capacities too now. Technical features: Input: 240 V, 1 phase or 415 V, 3 phase, 50 Hz AC CVCC Charger Available in 12V 5Amps to 20 Amps Available in 24V 5 Amps to 20 amps Available in 36V 5Amps to 20 Amps. For E Rickshaw Available in 48V 5Amps to 20 Amps. For E Rickshaw Available in 24V to 408 V from 5Amps to 20 Amps. For UPS systems Air Cooled Construction Suitable for indoor / outdoor applications Fully tropicalised Liberally designed components and adequately dreaded diodes.

• Voltage: 220 V
• Frequency: 50 Hz
• Vehicle Type: Car
• Material: Stainless Steel
• Surface Finishing: Polished
• Power Consumption: 1 Hp

Charger Model : MC-4-VRLA suitable for 4 batteries and MC-10-VRLA for 10 batteries Advanced PWM switch mode (SMPS) technology to provide constant current charging over wide mains voltage variation of 170-270v Current control to set constant charging current from 200ml Amp to 2 Amp 14.4 volt charging cut off per battery Automatic Voltage selection depending on the number of batteries connected in series Short circuit and reverse protection Anti Fume resistance

• Application: Charging, Power Converting
• Certification: CE Certified, ISO 9001:2008
• Weight: 100-200gm, 300-500gm
• Color: Black, Brown, Grey
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years, 6months
• Driven: Electric

• Output Voltage: 240 V
• Input Voltage: 220V
• Operating Temperature: 30 degree Celsius
• Output Current: 10Amp
• Application: Voltage Controlling
• Material: Iron

Solar Batteries are an excellent power solution for uninterrupted power supply, operated through a system. High grade components which match international industrial standards are assembled for making these reliable Solar Batteries. The size and power specifications of Solar Batteries, offered by us, can be customized according to the client’s requirement. These Solar Batteries are a reliable power solution for places which experience frequent power-cuts.Attributes Long service life Highly reliable Maintain uninterrupted power supply through the system or machine. Range : 6 v, 4.5 ah & 12 v (7.2 ah, 20 ah, 40 ah, 50 ah, 65 ah, 75 ah, 100 ah, 120 ah, 150 ah, 180 ah, 200 ah)

A battery charger, or recharger,[1][2] is a device used to put energy into a secondary cell or rechargeable battery by forcing an electric current through it. The charging protocol (how much voltage or current for how long, and what to do when charging is complete, for instance) depends on the size and type of the battery being charged. Some battery types have high tolerance for overcharging (i.e., continued charging after the battery has been fully charged) and can be recharged by connection to a constant voltage source or a constant current source, depending on battery type.