Industrial Heaters Dealers in Kolkata

• Brand Name: CNC Machine
• Condition: New, Good
• Place Of Origin: Delhi
• Product Type: Oil Heaters
• Itme Name: Oil Heaters

As we give utmost importance to the quality of the products, we produce them in accordance to the quality standards. We are hailing from kolkata(india) and make sure to reach buyer's specific destination within the promised time frame.

• Features: Fine quality , Weather resistant , Compact size

• Color: Silver
• Condition: New

Ceramic and mica band heater 

We are offering tubular heater. Single ph-ac , 150w to 450w, heater body 12mm brass pipe, dimension as per motor frame size.

Strip Heaters consists of high resistance Nichrome wire insulated in MicaMicanite. Sheathed in Stainless SteelBrassTin. Terminal at one end or both ends. Available in sizes wide 1" to 4". Length 4" to 40".

INTRODUCTION:Quality is our cup of Tea. Tea producing Machinery bears the unmistakable stamp of quality assured by Garg Group of Companies.APT COAL FIRED HEATER is a proud addition to our excellent range of product .The result of most modern technological innovation, this . APT COAL FIRED HEATER is ideal for heating to suite the style of your Team Manufacturer.The latest APT COAL FIRED HEATER is manufactured with four generation technological sophistication , in 4 different Models Viz.: APT 625 & APT 621 & APT 618 & APT 418 to suit different type & capacities of Dryer .As the time is a changing factor, accordingly planters are switching over to Coal Fired Heater.If, you are looking for a Coal Fired Heater, do not look further ;Just go for APT, the unbeatable one .Technical Details:APT COAL FIRED HEATER coupled with mild steel Fabricated Side frame .APT COAL FIRED HEATER manufactured by Graded Cast Iron plate Fitted with High Heat Resistant Cast Iron Long and Short Tubes and arranged in staggered way to utilize the optimum heat and to pass the flue gas uniformly .APT COAL FIRED HEATER fitted with sufficient Insulated Mild steel Doors fitted on rails for sliding movement and also to clean the carbon soot and ash powder .APT COAL FIRED HEATER will be supplied with complete set of Fire Bricks, Fire clay, Asbestos Rope, Lagging compound and other joining materials as required .APT COAL FIRED HEATER can be connected with standard Chimney or Under Ground Flue Connection through Induced Draught Fan and outside Chimney. The necessary component will be supplied along with the Heater. APT COAL FIRED HEATER can also be tailor made according to customer's requirements.

Tubular heaters are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Tubular heaters are mounted through tank walls using standard pipe couplings and are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions.

• Thickness: 5-20 mm
• Length: 8-12 Inch
• Heater Material: Nickel
• Temperature: 500-600 Deg C
• Current: 20A

Electric Terminal Connections for Band Heaters will be Provided with Chrome Nickel Steel protection caps at center of width either at 1800 opposite the Clamping or 900 from Clamping, unless specified. All Band Heaters above Dia 60mm will be provided with Screw Stud Electric terminal connections covered with Chrome Nickel Steel Protection Caps. All Mica Band Heaters Below 60mm Dia will not have Screw Post Terminals.

Designed to perform well under critical conditions with great versatility. Inspected and tested under rigid quality controlled standards. Assures top performance and durability.

• Voltage: 220 V
• Size: 2X10 Inch
• Is It Portable: Portable
• Usage: Industrial
• Resistance: 200 Ohm

Using ZKL’s Induction Heater , you can install bearings with high precision into shafts without any risk of damage. Heating of the bearing prior to installation to a particular temperature is necessary in order to retain the micro structure essential for getting the maximum efficiency from the bearing, without which bearings are at risk of damage. ZKL ensures that you don’t face this problem with the specially designed Induction Heater. Digital read – out panel Automatic de-magnetization 80 % savings in power Induction Coil and electronics protected from thermal overheating Contemporary, Sleek , compact and rugged design Light weight for easy carriage of operation Standard Yoke sizes Auto timer Auto temperature alert

Scarlet mica band heaters consist of Nickel chrome ribbon wire that is wound evenly on special mica insulators to create a uniform emission of heat. The next step is to manually assemble the connection depending on the terminals required. The whole is then placed in sheath casing ensuring a perfect enclosure and placed on a rolling machine to get the precise inner diameter required. Tabs are also welded at both extremities in order to be able to adjust pressure where the mica band heater is placed.

As a function ,the main heat exchanger is placed over the refractory lined furnace and treated water is circulated through the coil heat exchanger . Fuel is burnt in the furnace and releases the heat which is absorbed by the water which is being circulated through the coil and transfer the heat to the connected process. In this process the water temp. may be raised over 200 deg. C moderately. Even at this high temp. the water remains at liquid state by applying the external pressure through nitrogen over the system. There are lot of processes require heating as well as cooling system to produce the right products (e.g. Laminate, film face ply, high density ply, etc.) where heating through hot water is very effective technically. A high amount of heat can be accumulated in a vessel (pressure vessel filled with hot water) from where the additional heat can be supplied during surge/peak load in the process. This system got an advantage over steam heating because no condensation takes place during heat transfer nor any flash steam discharges to the atmosphere. Same water circulates hence no water loss, no regular treated water requirements thus keeps the heat exchanger healthy. The best advantage of this system is that it does not fall under Boiler regulation act hence easy to install, maintain and no statutory requirements.

• Voltage: 220V AC
• Country of Origin: Made in India
• Power: 450W
• Brand: Temp-up
• Size: 400x400 mm
• Temperature: 100 Degree Celsius

  Welcome to the new age immersion rod from Gloster. Now heat water quickly and safely for all your household needs. Stay safe from burn accidents and be assured of superlative performance every single time. Available in 1000 W and 1500 W. Anti-corrosive material. Water level indicator. Safe and shockproof elegant design. Strong, steady handle for extra-long life. Powerful heating element.

• Type: Induction Hardening Machine
• Weight: 100-1000kg, 1000-2000kg, 2000-3000kg, 3000-4000kg, 4000-5000kg
• Color: Blue, Green, Grey, Orange, Sky Blue, White
• Voltage: 110V, 220V, 380V, 440V, 500V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 12-15kw, 15-18kw, 18-21kw, 21-25kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1year, 2years

We are offering mica heating elements, mica heating elements high resistance nichrome or electrical wire is winded around natural mica providing quality insulation for use as heating elements in irons, toasters, kettles, rice cookers and other electric heating appliances. It is available in all usual sizespatterns in different voltage and wattage as per specifications.

Hopper Heater: The suspended particulate matter (SPM) from the Flue Gas Strem passing through the ESP's are collected in the hoppers below. These are then removed from the ESP and carried by Conveyors of various designs. However, choking and accumulation of this dust sometimes happens in the hoppers due to the presence of moisture and low temperature in the hoppers. This adversely affects the performance of an ESP. As such, hopper heaters are installed in the hopper walls which helps in maintaining the temperature in the hoppers, thereby avoiding any choking or acumulation. Insulator Heaters: The successful performance of an ESP is depending on many factory including the temperature inside the ESP. Air Ingress takes place in the ESP's through the openings of the Insulators. Heaters are installed here to heat the entering air thereby maintaining the temperature within the ESP.

Electrical resistance wire for heating elements, resistors and heat sealing packaging machines. Also, High Strength Hot Cutting wire for foam cutting, plus ‘Hot and Cold Cutting Wire Assemblies’ for durability and strength at high temperature.

• Material: Mild Steel
• Fuel: Wood /Coal /Agrowest
• Maximum Temperature: Approx up to 300 Degree C
• Design: External Furnace
• Brand Name: Aarkay

The Gravity Co2 Gas Pre-Heater is designed to be connected between the outlet of a cylinder & inlet of a regulator , the powerful heating element heats the gas as it flows thru the body of the heater and thus avoiding regulator freezing .

• Condition: New
• Application: Factories, Industries
• Features: Robust construction, High performance , Corrosion resistant.

• Brand Name: Autokage
• Condition: New
• Place of Origin: India
• After-sales Service Provided: Engineers available to service machinery overseas

• Brand Name: Trans Power
• Material: Mild Steel and also available in Stainless Steel
• Voltage: 220 V and also available in 440 V
• Power Source: Electric
• Frequency: 50 Hz
• Phase: Single and also available in Three
• Current Type: AC

• Diametre: 2" to 12"

Band Heaters made of high resistance Nichrome Wire insulated in MicaMicanite. Sheathed in BrassTine Stainless Steel Diametre from 2" to 12". Connection available in screw type, wire leads or pine type.