Industrial Lighting Fittings Dealers in Tollygunge, Kolkata

As quality is our topmost concern, we give maximum priority to the stringent checking of the entire range of products. If buyers are interested in attaining LED Lights at the lowest prices, our organization is the products' established supplier. We are Procurement/Out Souring from the very renowned SSI Unit, Certified by MSME Department Government of India.

Soda ash has a tendency to absorb moisture from the atmosphere. The moist soda ash then starts absorbing atmospheric carbon dioxide. This phenomenon of absorption of moisture and carbon dioxide by soda ash is known as weathering. After weathering, soda ash is likely to contain appreciable moisture and sodium bicarbonate, but the total alkali content of the bag does not change. Soda ash has a tendency to cake when it comes in contact with moisture and, consequently, becomes lumpy.

LED High Bay Light is manufactured with the best quality components and is in compliance with international standards. LED High Bay Light offers longer working life, along with being a great energy saver. Our LED High Bay Light is an ideal product for residential and commercial use. These LED High Bay Light provide excellent illumination and can be easily installed. Specifications Life expectancy of the product above 50,000 hrsColour Temperature : Cool WhiteCRI : 80High quality Lamp Housing for better environmental protectionEfficiency of driver 85%Junction temperature less than 65 oCAvailable in 50W / 70W / 100W / 150W / 200WLED industrial light applications in buildings, factory, warehouse, large supermarket, sculpture, stadiums, squares, docks etc.Housing / Trim material : Aluminum Die castInstant Lighting on with no flickeringZero Mercury : Lower CO2 emissionHealth protection : No UV / IR - more comfortable for vision

A Stacker is a large machine used in bulk material handling. Its function is to pile bulk material such as limestone, ores and cereals on to a stockpile. A reclaimer can be used to recover the material.   Stackers are nominally rated for capacity in tonnes per hour (tph). They normally travel on a rail between stockpiles in the stockyard. A stacker can usually move in at least two directions: horizontally along the rail and vertically by luffing (raising and lowering) its boom. Luffing of the boom minimises dust by reducing the distance that material such as coal needs to fall to the top of the stockpile. The boom is luffed upwards as the height of the stockpile increases. Some Stackers can rotate the boom. This allows a single stacker to form two stockpiles, one on either side of the conveyor. Stackers are used to stack in different patterns, such as cone stacking and chevron stacking. Stacking in a single cone tends to cause size segregation, with coarser material moving out towards the base. In raw cone ply stacking, additional cones are added next to the first cone. In chevron stacking, the stacker travels along the length of the stockpile adding layer upon layer of material.   Stackers and reclaimers were originally manually controlled, with no means of remote control. Modern machines are typically semi-automatic or fully automated, with parameters remotely set. The control system used is typically a programmable logic controller, with a human-machine interface for display, connected to a central control system. Other than stacking, a stacker has three basic movements: Luffing: This is vertical movement. Stackers use either a winch mechanism with metal wire, or hydraulic cylinders, generally two. Winch mechanisms are highly reliable compared to hydraulic actuators and remain widely used, particularly in large stackers. Travelling: The stacker moves on a rail track, which may be broad or narrow gauge, enabling it to move around the stockyard as required. For this purpose, traction motors powered by direct current (DC) are connected by bevel gears to between 12 and 22 wheels. For manual control, all the controls are in a controller’s cabin above the boom conveyor or boom. Modern Stackers can be controlled remotely. Slewing: This is rotation of the stacker around its central axis to align or place the stockpile where required. This works mostly by a slew pinion that rotates around a slew base. This type of gear assembly is called a sun and planet gear. The axles may be multiple and are driven by DC-powered axle motors which transmit the torque via bevel orhelical gears.

bulkhead light fittings, Electric Plug, Electrical Power Socket

We are leading supplier of huge range of Lathe Machine.

Led Lights, Led Curtain Light

Solar Water Heaters, SOLAR PANELS