Industrial Strainers Dealers in Kolkata

• Specialities: Non Breakable, Rust Proof
• Operating Type: Manual
• Thickness: 15-700 mm
• Brand Name: Flowtech
• Shape: T Shape
• Surface Treatment: Polished

• Thickness: 5-10mm
• Mesh Size: 200-400cm, 400-800cm
• Size: 75-90Inch, 90-105Inch
• Material: Aluminium, Brass, Bronze, Stainless Steel, Etc
• Application: Chemical Use, Liquid Use
• Feature: Corrosion Resistance, Hardend & Temper, High Quality

New Ghosh Industries is reckoned as one of the Stainless Steel Testing Sieves exporters, based in India. Our stainless steel testing sieves are manufactured from the purest quality steel. All our stainless steel testing sieves are highly reliable and thus offer high resistance to rusting. Our stainless steel test sieves are very light in weight, which makes them user-friendly. Our stainless steel test sieves comes in various sizes and thus you can easily choose the one that suits your need. We provide stainless steel test sieves at the most competitive prices.

JMT Make Duplex (or double basket) strainer can operate continuously and never has to be shut down for cleaning. This type of basket strainer has two separate strainer basket chambers that operate independently. When one basket chamber becomes full, the flow is switched to the other allowing the first basket to be pulled out and cleaned.

We take the credit of introducing high quality Duplex Strainer which is highly in demand in the industry. This Duplex Strainer is brought to you in an array of dimensions befitting the variety of industrial applications where it will be extensively used. Advantages Continuous operation Consists of two filtration chambers Higher flow rates handled by Disc Type Change-overRedirection of fluid flow without interruption of flow with manual change-over valve.

The “Tee” strainers are suitable for either horizontal or vertical (downward flow) piping. Free straining area is minimum 6 times pipe CS area. Standard elements are 40 mesh stainless steel welded. Stiffeners made of rods form the skeleton of the filter elements. The mesh is spot welded with the stiffeners for maximum strength. Different size perforations and meshes are available in Stainless steel, , and brass to meet specific media requirements. Other materials of construction for filters can be provided on request. This pressure drop chart is based on the flow of clean water through 6 mesh (approx 1/8” hole size) perforations

We manufacture a wide variety of oil filters, strainers, filter bags exclusively for oil line and hydraulic line. The strainers are manufactured from GI sheets and wire netting that has suitable media, as per the designed specifications.

• Packaging Type: Box,Box
• Flow Rate: 40 lpm
• Brand Name: Hydroline
• Shape: Round
• Power Source: Hydraulic
• Weight: 0.20 Kg
• Usage/Application: Construction
• Max Working Temperature: 80 Deg C
• Flow: 20 LPM
• Overall Length: 79 mm
• Dia Nut Cap: 68 mm
• Screen Area: 400 cms

Reusable SS 100 mesh / 149 micron std Aluminium die cast nut Steel cap / support tube Continuous epoxy bond Suitable for hydraulic/mineral oil Max. Working temp. 80oC     Amco Filter Suction Strainer Elements are designed for installation into suction lines of pumps. Extra caution should be taken to ensure that the suction elements are always mounted below the minimum oil level of the reservoir. Standard models have nominal filtration ratings of 74 or 125 microns. The suction strainer elements can also be supplied with a bypass valve to reduce high pressure drops caused by contaminated elements or high viscosity fluids during cold starting. The bypass valve opens at 3 psi. For best results, suction strainer elements should be sized for clean element pressure drops off no higher than 0.5-.07 psi.Amco Filter suction Strainer Elements are manufactured using stainless steel wire screen media. Suction strainer elements are only intended to protect hydraulic pumps against catastrophic failure caused by coarse contaminants. Suction strainer elements should be inspected and cleaned regularly. Suction strainer elements should not be used as the only filtration elements in a hydraulic system. Pressure filters and return line filters, with reasonable dirt holding capacity, must be installed to provide protection against component damage caused by fine contaminants.

MATERIAL OF CONSTRUCTIONBody : Cast Iron to IS 210 FG 200Cast Carbon Steel to ASTM A 216 GR WCBMS Fabricated to IS 2062Stainless Steel to ASTM A 351 GR CF8 or CF8MScreen : Brass or SS 304 or SS 316 END CONNECTIONSFlanges may be laced and Drilled to IS or BS or ANSI or DIN Standard •  Screens of Brass or SS perforated sheet with a mesh of ranges between 30 to 200 microns as Desired by the customers •  Surface area of straining element la 2.5 times of flow area minimum •  Valves can be supplied higher sizes 40 to 1200 mm, If required

Special Features :- It is specially designed where uninterruption flow is required. It is made of two parts with 2 nos. 3 way valves or 4 nos. Butterfly valve for maximum utility.Optional feature like pr. drop indicator (audio & visual)can be provided for change over. Complete automation also can be supplied for change over.   Connection Size :- 25 NB to 600 NB flanged end.   Filtration :- Range – 10 micron to 500 micron.

• Color: Silver
• Material: Stainless Steel and Wood
• Size: 28-30cm
• Ss Grade: SS304
• Weight: 100-200 Gram

flanged pipe fittings

butterfly valves strainers, Check Valves, Bellows

Suction Strainers, Flexible Drive Couplings, Filler Breather

steam jet ejectors, stainless steel spray nozzle, Industrial Spray Nozzle

hydraulic suction strainers, Absolute HEPA Filters, return line filters

Suction Strainer, hydraulic filter assembly, Hydraulic Filter Elements

tractor oil filters, coolant filters

Three Piece Design Ball Valve, Pneumatic Cylinder Operated Globe Valve

Automatic Back Wash Strainer

Industrial Pipes, industrial control pulp valve, Strainer, Pipes

Bronze Strainers

Y Strainer Valve, Blank Flanges, Redial Tee, Gunmetal Ball Valve

Bronze Strainer, accessible feed check valve, blow off valve

Paint Strainers, Tack Cloth, Acrylic Solvent, Automotive Masking Paper