Thruster Operated Rail Clamp
10 Piece (MOQ)
Material : Mild Steel
Finishing : Coated
Color : Yellow
Automatic Grade : Semi-Automatic
Application : Industrial Use
Packaging Type : Carton Box
Warranty : 1 Year
Country of Origin : India
...moreResistance Box
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make resistance was stainless steel grid and wire grid types. These have been developed to comply with IPSS dimensions and ratings , when called for and the capability of replacing resistors of foreign manufacturers without the need for extra space and fall in line with almost all national and international standards. Resistor elements are corossion resiatant and non breakable. These can be installed indoor and also outdorr with appropriate enclosures. These are designed to withstand shock and vibrations of Cranes and similar material handling equipments. While in use carrying currents, the grids expand due to heat developed and proper allowance for the expansion of these grids have been given, otherwise the grids would break. This allowance for expansion is given unquiely slottimng the end frame or the grids or both.
Material : Stainless Steel & Available In Others
Shape : Rectangle
Color : Silver
Condition : New
Application : Industrial Use
Country of Origin : India
...moreSolenoid Operated Brake
10 Piece (MOQ)
INDUSTRIES SYNDICATE ‘ make solenoid brakes are 2 phase and 3 phase completel steel fabricated with cast iron shoe brakes.
Material : Mild Steel
Color : Grey
Application : Industrial Use
Voltage : 210-415V
Phase : 2 Phase And 3 Phase
Warranty : 1 Years
Country of Origin : India
Brand Name : Industries Syndicate
...moreRadio Remote Control For EOT Crane
10 Piece (MOQ)
ELCA radio remote controls are full range of On/Off and Proportional Radio remotes with 5 On/Off and 1 proportional transmitter models available in various formations or layouts. 4 different receivers with various options.Use of Rechargeable batteries on all of our systems. Batteries are NiMh with up to 20 h autonomy for On/Off and 10 hours for Proportional ( under normal working conditions).Radios produced with the use of componential system for easy access and removal or repair in case of faults. Automatic Frequency change built into all electronics. Based on model available as manual change or automatic change.Same Electronic modules used on all systems UNIQUE ( unequivocal) code keys programmed in Elca All systems available in 433 – 434 Mhz frequency band or alternatively in 870 Mhz band ( MITO model ).Working range 150 meters ( more if in open range)
Application : Industrial Use
Feature : Easy To Install, Relayed Outputs
Warranty : 1 Year
Country of Origin : India
...moreNFLP DC Electromagnetic Disc Brake
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make Spring applied Fail Safe Electromagnetic DC brake is designed to perform holding as well as emergency stopping functions (Normally On), making it particularly well- suited for brake motor applications. These brakes are electromagnetically actuated with two friction surfaces on a single disc. The braking power is applied by means of compression springs. The braking torque is generated in the no power or in event of power failure condition. These brakes are having torque up to 1600 Nm. Brake are available in various version as per application. When electric current passes through the stator( brake coil), the armature plate is attractedto the statoragainst the spring force, thus releasing the rotor. When current is cut OFF,strong compression springs pushes the armature plate to its original postion, which clamps the rotor providing the braking torque.
Driven Type : Electric
Current Type : DC
Color : Black
Power : 1-3kw
Application : Industrial Use
Voltage : 110-220V
Country of Origin : India
...moreDC Electromagnetic Disc Brake
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make Spring applied Fail Safe Electromagnetic DC brake is designed to perform holding as well as emergency stopping functions (Normally On), making it particularly well- suited for brake motor applications. These brakes are electromagnetically actuated with two friction surfaces on a single disc. The braking power is applied by means of compression springs. The braking torque is generated in the no power or in event of power failure condition. These brakes are having torque up to 1600 Nm. Brake are available in various version as per application. When electric current passes through the stator( brake coil), the armature plate is attractedto the statoragainst the spring force, thus releasing the rotor. When current is cut OFF,strong compression springs pushes the armature plate to its original postion, which clamps the rotor providing the braking torque.
Material : Cast Iron
Current Type : DC
Color : Black
Power : 1-3kw
Application : Industrial Use
Voltage : 110-220V
Country of Origin : India
...moreNeutral Grounding Resistor
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make NGRs are rated upto 33KV.Single line to ground faults are tripped off immediately.This is one of the widely used form of system grounding. Usually neutral of substation transformer upto 33kv is grounded through a resistor called neutral gounding reistor. Ohmic values are so selected as to relieve the system of destructive transient voltages.
Material : Stainless Steel
Finishing : Polished
Color : Grey
Usage : Electrical Industry
Voltage : 240V
Phase : Single Phase
Warranty : 1 Year
Country of Origin : India
...moreMotor Control Panel
10 Piece (MOQ)
INDUSTRIES SYNDICATE ‘ make control panels are for HT & LT applications suitable for both FLP and NFLP atmospheres.
Brand Name : Industries Syndicate
Body Material : Mild Steel
Power : 3-6kw
Power Source : Electric
Application : Industrial Use
Voltage : 110-440V
Autoamatic Grade : Automatic
Country of Origin : India
Warrenty : 1 Year
...moreMaster Controller
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make master controllers can be provided with upto 6 notches in each of forward and reverse directions besides an OFF notch. The contacts have braking capacity of 8 Amps at upto 550 V,50C/s AC and 180 Watts for DC inductive load.. These are used in plain rotor resistance controls, thrustor operated creep speed controls and other specialised controls for AC Cranes or workshop duty or production type with repetitive operations on arduous duty cycles. all parts are easily accesible and replaceable.
Material : Alloy Steel
Finishing : Powder Coated
Color : Grey
Application : Industrial Use
Warranty : 1 Years
Country of Origin : India
...moreLiquid Controller & Starter
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make liquid resiatance starters control rotor circuit only and a separate switch is required for the stator circuit of the motor. Both stator switch and Rotor starters can be engineered together for complete stator rotor starter. The starter comprise of a set of 3 fixed and moving electrodes for 3 phases under a head of electrolyte , which forms the resistance medium. The resistance is increased and decreased as the moving electrodes are made to recede form or approach the fixed electrode.
Driven Type : Electric
Automatic Grade : Automatic
Power : 3-6kw
Weight : 100-1000kg
Warranty : 1year
Country of Origin : India
...moreIndustrial Limit Switch
10 piece (MOQ)
INDUSTRIES SYNDICATE’ make limit switch, lever operated spring return, continuously rated for 40Amps at 440V, 50 cycles, with four pairs of normally closed contacts. Moving crane pushes the lever at the limit of travel and opens two pairs of contacts in two phases thus disconnecting power supply require for motion in the same direction, but at the same time providingconnection for reverse motion. The switch is contained in a sheet metal encloser with cast iron top and bottom cover and suitable for plain cable entry. Over-travel trip is bi-directional with backing out. Travel shunt limit switch, mill duty type, spring reset, rated for 10amps, at 440V, 50 cycles, (or 2.5 amp. D.C. non-inductive at 220-V.) 2pairs of silver-tripped contacts, 1 N.O. & 1 N.C., in dust-tight cast-iron enclosure, insulation level 660V. Various lengths and shapes of lever roller arrangement are also available. Hoist Limit Switch, dead weight operated & counter weight reset, type H-50C, with 2 pairs of contacts rated for upto 50 amps, at 440V, 50 C/s, normally closed under counter-weight predon…over dead-weight but opening in the event of suspended counter-weight being pushed up, snap-action type in M.S. sheet metal enclosure, complete with counter-weight & rope. Insulation level 660-V. Spindle type Hoist/Lower Limit Switch, type LH4S, with 4 pairs of contacts, normally closed, two pairs opening at the limit of travel in one direction, and the other two pairs opening at the limit of travel in the other direction, but providing circuit for reverse motion in each case, in cast iron enclosure, contacts rated for 20 amps, at 415 volts 50 cycles, maximum revolution of the spindle for directional trip from end to end in 40, adjustable to lower value.
Material : Mild Steel
Surface Finishing : Power Coated
Usage : Industrial Use
Rated Voltage : 440 VAC
Packaging Type : Carton Box
Specialities : Rust Proof, High Quality
Mechanical Life : 1 Year
Phase : Double Phase
Country of Origin : India
...moreelectro hydraulic thrustor brake
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make AC Electro-Hvdraulic Thrustor operated brakes are used on 3 phase 50 cycles supplies and voltage upto 550 volts. Electro-Hydraulic Thrustors are totally enclosed and meant for industrial use. These can also be used outdoors and on non flameproof as well as on flamproof minning duty in various gaseous atmospheres.Thrustor Brakes are menat for arresting motions of Cranes, Conveyors, Elevators, rope-ways, industrial equipment like textile Machinery, Rolling Mills, Rubber Processing Plants, machine tools to name a few.
Brand Name : Industries Syndicate
Material : Cast Iron
Feature : Corrosion Resistance, Heat Resistant
Voltage : 110-440V
Packaging Type : Carton Box
Frequency : 50Hz
Warranty : 1 Years
Country of Origin : India
...moreDrum Controller
10 Piece (MOQ)
INDUSTRIES SYNDICATE ‘ make CAM operated Contactor Controllers have contacts in the shape of magnetic contactors. These contacts are closed and opend mechanically by operatimg an external mechanically by operating an external handle of crank type.These are used for controls of steel works cranes, furnace charging equipment, colliery haulages, both direct and endless, electric winders and coal grabs etc
Application : Industrial Use
Feature : Rust Resistance, Optimum Performance
Warranty : 1 Year
Country of Origin : India
Brand Name : Industries Syndicate
...moreDC Electromagnetic Shoe Brake
10 piece (MOQ)
INDUSTRIES SYNDICATE’ make DC Electromagnetic Shoe Brakes have been majorly designed confirming to important dimensions of ertswhile USSR – brakes, namely fixing holes and centre heights. The brakes are spring actuated , which can be set at different lengths for obtaining diffrent figure of braking torques. Brakes is released by a DC short – stroke magnet. In the absence of power, brake remains applied- a fail safe feature in the vent of power failure. Braking torque depends upon spring force and remains constant at all speeds of the drum, a linning friction is sensibly constant.
Driven Type : Electric
Current Type : DC
Color : Multicolor
Voltage : 440V
Weight : 20-30kg
Country of Origin : India
Speed : 1000-2000rpm
...morecable reeling drum
10 Piece (MOQ)
INDUSTRIES SYNDICATE ‘ make Cable Reeling Drum is a device , for transmitting power by means of a live insulated cable from supply source to the power consuming device, called consumer where there is a relative motion between the consumer and supply source.
Brand Name : Industries Syndicate
Material : Mild Steel
Shape : Round
Application : Cable Reeling
Country of Origin : India
Barrel diameter : 300-400mm
...moreBrake Drum Coupling
10 Piece (MOQ)
INDUSTRIES SYNDICATE’ make couplings are full geared, half geared,brake drum type gear coupling, resilient couplings. Full Gear coupling is designated as both hubs and sleeves are having outer and inner teeth respectively. Gear coupling Teeth are floating because teeth on outer surface of hub have spherical shape and teeth inside cover have cylindrical shape, have appropriate tangible clearance. Half Gear Coupling comprises one flexible geared half and one rigid half. It does not accommodate parallel displacement of shafts but does accommodate angular misalignment. This type of couplings are primarily used for “floating shaft” applications.The brake drum type gear coupling is used to connect the motor and gearbox shaft or gearbox and machine shaft.The brake is fitted on the brake drum.Thus it serves dual purpose of being a coupling and brake drum.Brake drum type coupling is mainly used to stop the service equipment without switch off the motor.Basically a mechanical force is applied from outside to stop the equipment.
Material : Mild Steel
Finishing : Polished
Shape : Round
Speciality : Excellent Quality
Usage : Industrial Use
Packaging Type : Carton Boxes
Country of Origin : India
...moreBe first to Rate
Rate ThisOpening Hours
We, Industries Syndicate are a leading manufacturer and supplier of premium control systems and components specifically designed for material handling equipment. With a strong commitment to innovation, quality, and customer satisfaction, we offer a comprehensive range of products that cater to various industries, ensuring efficient and safe operations across the board.
Our Mission
Our mission is to empower industries with cutting-edge control solutions that enhance the performance, safety, and reliability of material handling equipment. We strive to be a trusted partner to our clients by delivering high-quality products that meet and exceed industry standards.
Product Range
We offer an extensive range of control items tailored for various types of material handling equipment, including Electromagnetic Brakes, Master Controllers, Radio Remote Controls for EOT Crane etc.
Why Choose Us
Expertise: With years of experience in the industry, we possess deep knowledge and expertise in control systems for material handling equipment.
Innovation: We are committed to continuous innovation, ensuring our products incorporate the latest technology and best practices.
Customer Focus: Our customer-centric approach certifies that we recognize and meet the unique needs of each client.
Global Reach: We serve clients across the globe, providing them with reliable products and exceptional service wherever they are located.
Sustainability: We are dedicated to sustainable practices, designing products that are energy-efficient and environmentally friendly.