Injection Pump Dealers in Kolkata

• Model #: RMT 545 RNS
• Total weight: 22 kg
• Total height: 1115 mm
• Width & length: 610 x 200 mm
• Air pressure required: 42-47 l/s at 4.8-5.5 bar pressure
• Total head capacity: 3 - 20 Meter

RMT 545 RNS pump is an Air Operated Pump, suitable for cement injection. As it is a pneumatically operated unit, it can be installed at any place without any trouble and it is absolutely safe to use. It is basically designed for cement grouts & water based binder where low volume but high pressure is needed. It produces high pressure for spraying. The major attraction of RMT 545 RNS Pump is its portability. Due to its light weight, it can be moved or relocated very easily. Yet it is rugged to withstand the normal mines handling. It is very easy to maintain because of very few screws.

Roof Bolting & Cable Grouting Fully Grouted Bolts & anchors installed by pregrouting or post injection.Long hole grouting from 3m to 20m, can be injected with cementitious or other mixer (Water based resins etc.) in ratio from 1 : 0.00 up to 1 : 2. Ventilation control by spraying on to walls and prefabricated meshes.

ZKL– Committed to Trouble – free Handling & Maintenance of Bearings ZKL has always exhibited its care and concern for customers by developing a range of value-added products, accessories/tools and instruments that ensure higher efficiency and longer life for its bearings. One of such developments has been the use of Oil Injection methods for Mounting and dismounting of bearings, especially large – sized ones. How Oil Injection Works Oil is injected under pressure (by a reciprocating hand pump)between the shaft and the inner ring of a bearing. The oil exerts pressure and expands the inner ring at the same time forming a lubricating film. This helps bearings, couplings , fans etc , to slide out easily resulting in scratch – free dismounting.

• Weight: 60 KG,25 KG
• DIMENSIONS: 20" X 17" X 34",17" X 12" X 24"
• SUCTION SIZE: 3"(75 MM),2"(50 MM)

KDP - 250 & 170,For Shaft sinking, Drives, Decline, Ramps, Tunnels & Dams etc. KDP - 250,Head - 50 - 70 Mtrs.Working Pressure - 70 - 80 psi and 100 cfm Consumption,Discharge - 250 Lpm KDP - 170,Head - 40 Mtrs.Working Pressure - 60 - 70 psi and 70 cfm Consumption,Discharge - 150 Lpm.

We are one of the trusted companies in this business and are involved in presenting an extensive quality range of Fuel Injector Assembly to our precious customers. This Fuel Injector Assembly is manufactured utilizing advanced machinery and latest technology. These products are available with us at market leading prices. Features: Easy to install Long service life Easy maintenance

fuel injection internal gear pump, Kirloskar Pump

Rotodyne Fuel Injection Internal Gear Pumps

fuel injection pumps, injectors, turbo chargers, power steerings, Radiators