Instrumentation Equipment Dealers in Bbd Bag, Kolkata

L.D. BHATTAR & CO SOURCE TO ALL CABLE REQUIREMENTS Home About Us Products Enquiry Contact Us     As the generated voltage in the thermocouple circuit depends upon the difference of temperature between the hot and cold junction of the thermocouple, the accuracy of the measured temperature of junction depends on keeping the other junction at a known constant temperature. The temperature in the connection cap isn’t constant. For this reason the legs of the thermocouple are extended by means of COMPENSATING CABLE LEADS made of material which will not produce, in junction with the thermocouple metal, any additional voltage. Thus the COMPENSATING CABLE LEADS effectively extends the junctions of the thermocouple to a convenient point of constant temperature ensuring the accuracy of the measured temperature for which the thermocouple is used.

Siemens Ultrasonic Flow meter is used in wide range of application Like Water Industry, Chemical Industry, Power Industry. Clamp-on & Portable both flow Meter has single & dual channel feature. SITRANS FST 020 is a Standard Model with flow rate accuracy is +/- 1.0 % to 2.0 %. But high precision model SITRANS FUE 1010 are also available with accuracy 0.5 % ­- 1.0 % of flow.  FUG1010 is for Gas application & FUH1010 is for oil application. SITRANS FUS1010 IS 4 Channel Ultrasonic flow meter.

Electrically insulating Mechanically strong Integrated moulded in design >> no leakage Inserts moulded in >> very little post forming assembly No limitation in size or shape Quick, inexpensive prototyping No bio-degradation No rodent/termite damage Design changes easy to accommodate Corrosion resistant Rust proof Light weight Thermally insulating Flame retardant Easy to install Lasting finish Dimensionally consistent Aesthetically appealing.

• Features: High accuracy, repeatability. High insulation resistance (>100 M ohm @500 VDC at 250C) Fast response Mineral insulated construction enables the sheath to be bent / routed to suit installation without affecting performance.

Resistance Temperature Detector(RTD) used for temperature measurement -50 to 400 Deg.C. The system accuracy begins with proper primary sensor selection. Various considerations apply to the design of RTD assemblies. The element should be protected from shock and vibration, yet free of expansion stresses that may shift the reading. The element assembly needs to be isolated without obstructing heat flow. The outer sheath has to withstand pressure, erosion and vibration, yet it should be small enough for easy installation and rapid response to temperature changes.

• Power Supply: 10-33V DC
• Country of Origin: Made in India
• Frequency: 50Hz
• Accuracy: 0.5% & 0.25% FSD
• Usage/Application: Industrial
• Model Name/Number: PT-ASCORP
• Brand: ASCORP
• Voltage: 9-24V DC
• Accuracy: 0.5% | 0.25%
• Operating Range: upto 250 Deg.C.
• Output Type: 4-20mA | 0-5V | 0-10V | 0.5-4.5V Ratiomatric | RS485

• Material: Copper
• Thickness: 3 to 10mm
• Usage/Application: Construction
• Length: 4-5 meter

These cables are used in conveyor machinery such as transfer cars, boom-stackers, side arm chargers, bulk material conveyors etc. They find application in almost every industry segment like Steel Mills, Cement Plants, Docks, Power Plants, Automobile Industries & Refineries and Petrochemicals.

1KV cables are designed and manufactured based on the national (IS) & international (IEC, BS) standards and project based customer specifications. Following are the standard stages of cable design & manufacturing.

• Feature: Anti explosion design, High temperature resistance, Stable performance
• Item Code: PIT

We understand your needs, from power supply to process Supplying the technical solution is one thing, making sure it works according to your requirements is another. That requires personal commitment and a true understanding of your process. Adding our engineering competence will help you improve efficiency. We can design complete drive solutions or deliver turn-key projects, including everything from engineering to commissioning. Drive solution optimized for your process: Knowing your process and understanding your needs means we can offer a fit-for-purpose drive solution, tailored to your requirements. Based on our in-depth knowledge and long experience, we will combine the different components into an optimized drive solution that will give you the best total performance. Our engineering services can include, for example, electro mechanical engineering, software development, communication solutions, remote access, PLC programming, motor dimensioning or configuration. Turn-key projects for maximum security: You can let us take responsibility for the complete delivery, including engineering, cabinet construction, installation of motors and transformers, and commissioning. We take responsibility for the system`s performance with regards to operational and environmental conditions, specific requirements for EMC performance, IP classification or cooling, etc. Or we can simply assist you in sizing the components. Whichever you choose, you will benefit from us knowing what will work in your application.

• Material: Copper
• Application: Power Distribution
• Brand Name: NBI
• Length: 10 to 12 m
• Purity: 99.99%

Shree Narayan Sales & Services has gained prominence as the Supplier of LT Panel from Kolkata, West Bengal. The LT Panel offered by us is designed to meet the client’s requirement of operating different industrial applications.

• Shape: Flat
• Material: Aluminium
• Country of Origin: Made in India
• Thickness: 15 to 20 mm
• Finishing: Polished
• Usage/Application: Residential And Commercial

• Feature: Rust Proof
• Material: Metal
• Color: Grey
• Shape: Rectangle
• Surface: Polished
• Thickness: 1-3 mm

• Country of Origin: India
• Size: Multisizes
• Type: Control Panel Boards
• Application: Boiler Control, Electrical
• Color: Grey, White
• Voltage: 220V, 440V
• Body Material: Mild Steel
• Power: 3-6kw, 6-9kw, 9-12kw
• Power Source: Electric
• Phase: Single Phase, Three Phase
• Warrenty: 1 Year
• Autoamatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Brand Name: Manish Enterprises
• Material: MS Sheet
• Protection Level: IP-65
• Surface Treatment: Red Oxide
• Base Material: CRCA Sheet
• Board Thickness: 1.2mm

• Thickness: 3-25 Mm
• Length: 6-14 Ft
• Application: Automotive Industries
• Feature: Excellent Quality, Fine Finishing, Perfect Shape
• Technics: Forged
• Width: As Per Requirement
• Dimension: 1000-1500mm
• Edge Type: Square Edge, Full Radius Edge

• Material: Plastic
• Condition: New
• Display Type: Digital
• Power Source: Electric
• Feature: Accuracy, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet
• Warranty: 2Years
• Accuracy: +-0.5C, 0.5C
• Automation Grade: Automatic

We are reckoned as a prominent Digital Temperature Data Logger Supplier, Exporter from India. The Digital Temperature Data Logger offered by us is obtained from reliable manufacturers and vendors. Our Digital Temperature Data Logger is compact equipment used for calculating temperature and humidity level. Besides, we offer Digital Temperature Data Logger at industry leading rates. Features Memory for 32,700 readings LCD to show logging information easily Free selectable measurement cycle from 1sec to 24hrs Battery life : more than 3 years (Under Ideal condition at 22oC) Display all status for Alarm and Record through 2 LED�s Alarm display if user-defined max/min values are exceeded Analysis software used to view graphically or Text mode for logging data USB Computer Interface (Advanced Software Program for all windows) Standard Accessory Battery Holding Case Safety Lock USB Cable with Software Dimensions 94 x 48 x 33mm

• Country of Origin: India
• Type: Lt Control Cables, Power Control Cable
• Certification: ISI
• Color: Black, Green, Red, White, Yellow
• Feature: Quality Assured
• Voltage: 1100 V
• Jacket: Pvc
• Outer Material: Pvc
• Internal Material: Copper
• Thcikness: 0.5-1mm, 9.5-10mm
• Application: Equipment connection
• Conductor Material: Copper
• Insulation Material: XLPe
• Certification: ISI

• Country of Origin: India
• Material: Metal
• Thickness: 0-5mm
• Application: Fittings
• Color: Silver
• Brand Name: BS, Krishna

Brad nails and finish nails are both used in carpentry, driven into the surface of wood materials using air compressor-powered nail guns. Most of the time, brad nails are often called finish nails or finishing nails because their sizes do not really differ that much from actual finishing nails. Brad nails are generally used in trim carpentry, where the carpenter works on doors, casings, or moldings; finish nails are used in finish or detail carpentry, such as on cabinets and storage wood containers. This is because most brad nails have Read More  Features :    Material: High quality low carbon steel Q195 / Q215 / Q235    Finished: BRIGHT FINISH / ELECTRO GALVANISED / HOT DIPPED GALVANIZED / STAINLESS STEEL 304 & 316 / BRASS FINISH / COPPER    SHANK : NAIL HEAD / SHANK / POINT ( please refer to another word attachment for details )

A comprehensive kit for arduino based robotics application. It may be further expanded for various application with robot, robotics parts and components, arduino, raspberry pi, beaglebone, gps, gsm, rfid, motor, geared motor, high torque motor, robowar motor, planetary motor, stepper, hitec servo, robot wheel, robot chassis, quadcopter, esc, brushless motor, sensor, autopilot, flight controller, radio controller, wireless module, bluetooth, wifi, xbee, zigbee

• Material: Aluminium
• Surface Finishing: Polished
• Color: Black
• Automation Grade: Automatic
• Application: Automobiles

• Conductor Material: Copper
• Insulation Material: PVC
• Cable Length: 90 Meter
• Working Voltage: 250 V
• Working Temperature: 450 deg.C
• Number of Core: 4 Core
• Packaging Type: Box

• Application: Clinical, Veterinary Purpose, Home Purpose, Hospital
• Weight: 0.15kg

We are listed among the leading Genset Control Panel Manufacturers, Suppliers and Exporters from Kolkata, West Bengal. We offer technologically advanced Genset Control Panels that are fabricated in our own in house manufacturing facility, and is equipped with wear resistant spares and advanced technology. The Genset Control Panels offered by are perfect example of modern engineering and are therefore termed as the best available in the market. Why our Genset Control Panels?Modern engineering and designEquipped with two tier configurationFully or partially drawn out patternsDifferent variantsEnergy efficient VariantsStandard Genset control panelAMF Genset control panel Used inProcess industriesPower Control CentersMotor Control Centers

• Outer Material: Rubber
• Frequency (Megahertz): 50-60
• Wattage: 5-Watt
• Inner Material: Copper
• Voltage Grade: up to 1.1 kv grade

We offer the latest range of metering cum syn panels, which are treated for various procedures by using modern chemical treatment technology. Our products are made from fine quality raw materials which are further scrutinized on standard specifications.

• Brand Name: TIGER
• Place of Origin: West Bengal, India
• Supply Ability: 2400 Piece/Pieces per Day
• Port: Kolkata
• Packaging Details: 25 pcs.duplex box with 12 box master carton

• Features: High strength, Heat resistant, Smooth finish