Instrumentation Equipment Dealers in Beniapukur, Kolkata

Solid stranded annealed copper conductor & tinned bare General purpose HR PVC insulation Cores laid up (filled if needed) FRLS General Purpose PVC inner sheath Armouring round galvanized steel wires strips FRLS General purpose PVC outer sheath

Main LT Panel, PCC With single, Multiple incomer, bus couplers with proper interlocking, Required protection, fault indications, interlocking is provided. Various designs are offered in PCC like top, Middle, Bottom Horizontal bus chamber, panel with aluminum/copper bus bars, top / bottom / front / rear cable termination, combinations of APFC Part with PCC. Required facilities like DG Incomer with AMF Functions, Cut-off of non-essential feeders at the event of failure of mains power. Panel with provision to connect bus duct at main incomer side.

The Power Distribution Board offered by us is required wherever distribution of power is to be done. Our Power Distribution Boards are designed for catering to the power needs of different equipment and have Aluminium or Copper bus bar of adequate sizes to suit total Amperage of the Device. Construction One incomer with metering provisionsVarious outgoing feeders through Fuse Switch Unit/MCCB/ACB etc. Power Specifications 3 phase, 4W, 50 HzAC supply system Attributes Indoor installation typeOptimum power distributionLong functional lifeTough constructionEasy to maintain Used by InstitutionsHospitalsIndustriesMultistoried buildingsShopping malls etc.

We manufacture and export a qualitative range of thyristorised APFC panels, which are manufactured using best quality material. These panels are high speed power factor correcting system used for P.F. correction of loads with in short time. Easy to install, our range is available in both manual as well automatic functions. Further, we make sure that these are in strict adherence with set international standards. We offer thyristorised APFC panels, which are designed using cutting edge technology. Our range is known for power quality improvement, safe usage and less maintenance cost. Quality tested on various measures, our panels are standard compliant and available at highly competitive prices. Following are the prominent characteristics of the thyristor PFC modules offered by us: Suitable for real time power factor correction. Reaction time 5 mili seconds. Easy installation like contactor. Manual operation possible. Automatic Switch-off in case of over current & over temperature.     We manufacture and export Thyristorised APFC Panels for power factor correction and power filtration. The transmission effect created by electro-mechanical switched system is avoided by smooth connection and dis-connection of capacitors to and fro the network. The switches are resistant to wear and tear during the continuous process and thus capacitors remain safe. By taking into consideration advanced closed loop and measuring unit, the power factor is controlled very precisely. Reduction of over current protects the capacitors from exploding and thus resulting in longer life.

• Diameter: 2 inch
• Material: Iron
• Length: 6 m
• Thickness: 5 mm
• Usage/Application: Earthing
• Surface Finish: Galvanized

In the furnace when different types of fuel burns then a high volume of combustible gases produces which after heat transfer releases to the chimney. During the travelling this gases carries lot of particulates which are very harmful as well as hazardous though it is greatly depends on the type of fuel. To arrest the maximum particulates from the emissive gases different types of control devices are suggested. Among them Pulse jet type Bag filter system is better one for the small and medium size or capacity Heaters / Boilers / Furnaces. We are specialised in Pulse Jet type bag filter system as Pollution control equipment on various solid fuels. This type of system satisfy the Pollution control board norm easily. Even we have manufactured no. of S.S. made system specially for high moist fuel such as green wood and other high moist biomass fuels.

• Material: Gun Metal, Metal, Stainless Steel
• Application: Power Factor Improvements
• Thickness: 0-10mm, 10-20mm
• Color: Black, Grey, Smoke-Grey, White
• Feature: Easy Function, Good Quality, Low Power Consumption, Quality Tasted, High strength
• Condition: New, Used
• Phase: Three Phase
• Warranty: 1 Year, 2 Year
• Loading Capacity: 20-25kg, 25-30kg, 30-35kg, 35-40kg, 40-45kg, 45-50kg

Fire Fighting Panel, Electrical Panel, Fire Alarm System, fire proof doors

Electric Control Panel, Low Tension Control Panel

vacuum circuit breaker panel, Current Transformers Metering Unit

This system is specially required where the plant has a number of sub-unitsmachines and these are to be co-ordinated for safety, trouble shooting and economic production.

Resistance Temperature Detector, Oil & Winding Temperature Indicator

APE is manufacturing all types of customised electrical control panel which are duly type tested by CPRI. All the panels are fabricated through latest CNC machine and undergo ten tank process for painting.

lt control cable, LT Power Cable, Pvc Cable, pijf telephone cable

hydraulic control panel, Servo Control Panel, Chiller Control Panel

Control Panel Boards, panel board, high frequency induction welder

LT Panel Board, Steel Junction Box, DC Distribution Board

Process Control Systems

measuring equipment, Fire Protection Equipment

automatic control systems, riser

low tensions cables, Distribution Transformers, low tension cables

Electric Control Panel, genset, Diesel Genset, Silent Genset, Gas Genset

Electric Control Panel, Hard Coke, Met Coke, Ferro Alloy, ferro manganeses

Access Control System, Identity Cards, CCTV Cameras, Access Control Systems

Access Control System, cctv, biometric attendance recording system

Transformers

Electrical Cables, Cfl Lights, electrical bulb, Electrical Items

Electrical Panel, atm distribution boards, power panels, atm power panel

Pressure Transmitter, Pressure Instrument, pressure transmitter clamp