Instrumentation Equipment Dealers in Picnic Garden, Kolkata

We make puf panels, cold room, cold storage insulation, preinsulated pipes, prefab shelters. We also puf spray jobs

Ø  What is power Factor? Power Factor (PF) is the ratio of Power Utilized (KW) and Power Drawn (KVA). Generally, when the applied to the electrical motors, the entire power is not converted as useful Work Done (KW). Depending on inductance of the motor a reactive power (KVAR) is generated which results in drawing of excess KVA. PF = KWH / KVAH To reduce the KVA drawn, the inductive KVAR is to be nullified by introducing an equal and opposite Capacitive KVAR according to the load pattern, thus OPTIMUM PF is maintained. Ø  Why Power Factor must be maintained?   By maintaining an optimum PF the Power drawn (KVA) can be reduced, thus reducing the current passing through the electrical circuits to the maximum extent possible (event up to 50%) thereby reducing the machine down time. reduction in heat losses in turn increases the life of the electrical circuits. The State Electricity Boards (SEB’s) has installed Digital Electronic Energy (Tri-Vector) Meters for consumers, which has the provision of showing the PF and insisting to maintain the average Power Factor above a Specified limit (0.85 – 0.90 PF) Otherwise, for every reduction of 0.01 from the specified PF, PENALTY is levied on the Energy Consumption Charges (KWh) on the Electricity Bill. SEB’s are also offering PF incentives if the PF is maintained above the specified PF. In few states, where the metering unit is KVAh and if the PF is maintained at its optimum of 0.99, the electricity bill amount itself is reduced considerably. The optimum Power Factor can be maintained by installing Galaxy Electro Tech’s AUTOMATIC POWER FACTOR CONTROL PANEL Ø  Salient Features of Galaxy Electro Tech’s APFC Panel: Adjustment to any step of capacitor value Micro controller based technology. Digital computation of various parameters Continuous monitoring of parameters like Line Voltage, Current, Active, reactive and Apparent Powers and energies Scrolling Display on a Dot Matrix LCD Protection of Capacitors against damage due to High Voltage, Low Voltage Tends to maintain 0.99 lag Plug-in terminal connection No-Volt release features to disconnect all capacitors in the event of power failure Dynamic control of Reactive Power and Power Factor RS 232 / RS 485 Standard output port (optional) Fine & Coarse correction Controller Ø  Benefits of Galaxy Electro Tech’s APFC Panel: Power Factor penalty is avoided Avail incentives by maintaining optimum Power Factor Optimize the capacity by reducing the maximum demand KVA Avoids excess demand charges Improvement in line voltage Reduced line current losses and cable overheat Enhanced life of electrical circuits Avail Depreciation Reduced consumption (KWH) charges Avoids overloading of Distribution Transformers Additional Service connections in existing generation of power by reducing Energy Losses Reduced line losses Benefits SEB’s and Nation Galaxy Electro Tech’s APFC Panels are available from 25KVAR – 2500KVAR  Model onwards

We specialize in providing different types of Motor Control Center (MCC) Panels that are highly appreciated in the electrical industry. These panels are manufactured using high grade raw material and therefore.

   The Thyristor controlled panel supply the fully controlled Voltage and current to the Primary of the Transformer-Rectifier Set of ESP. It is a 2mm thick sheet steel powder coated encloser consisting of Switch fuse Unit, Contactor, Relays Control Transformers, Thyristors, Protection Circuits and a Micro-processor based controller. It supplies required voltage to the TR Sets from single phase 415 volts input by controlling the firing angle of two Thyristors connected back to back. Four nos of analouge meters mounted on the panel door indicate Primary voltage, Current and Secondary Voltage (kV) & Current (mA). Four nos of 22.5 mm LED lamps indicate Supply on, TR on, system Warning & System Trips respectively. It also gives the audiable sound during warning and trip. All types of safety & security interlocking facilities are provided. The thyristor control panel can also be designed and manufacture as per the customer requirement.

Ultrasonic Level Transmitter, Level Gauges, Tubular Level Gauges

Temperature Probe, Ecg Cable, Nibp Cuff, medical xenon lamp, Lead Wires

This system is specially required where the plant has a number of sub-unitsmachines and these are to be co-ordinated for safety, trouble shooting and economic production.

Resistance Temperature Detector, Oil & Winding Temperature Indicator

Electrical Control System, electronic control system, Switch Gears

control panel accessories, electric connector, Electric Insulator

field transmitter, vibration monitoring system, Dc Servo Motor

Electrical Control Desk Panel, Local Control Station Panel

Control Panel Boards, panel board, high frequency induction welder

Bus Ducts, HT Switchgears, lt switchgears, Panels, Feeder Pillars

Access Control System, Cctv Surveillance System, computer security device

ACB Distribution Panel, LT Panel Board, Steel Junction Box

industrial automation equipment

Solar Batteries

Control Panel Boards, electronic panel board

Transformers, Welding Equipment, welding systems, Welding Machine

Transformers, Electrical Products, Inverters, Substation, UPS

Iron Removal Filters, dm plant service, Installation, Ro Plant Services

Electrical Cables, Cfl Lights, electrical bulb, Electrical Items

Servo Control Panel, hydraulic control panel, Chiller Control Panel

Electrical Panels, Electrical Cables, Electrical Products, Electrical Wire

switch panel, Generator, Generator Sets

Electric Control Panels, Fire Alarm System, Fire Suppression System

Control Panel Boards, Low Voltage Switchgear, Transformer

Access Control System, GPS Vehicle Tracking System, Global Positioning System