Oriental Compressor Accessories Pvt. Ltd Radha Bazar, Kolkata, West Bengal

ORIENTAL manufactures these rings again in soft metals and at times in polymers also. These avoid oil or oil fumes arising from the crank case through the cross head and connecting rods to enter the gas chamber, thus protecting wastage of expensive oil and saving the gas from contamination.

Valves and Valves Components is considered to be the heart of the equipment, the success of a good designed valve is dependent solely upon the process in which it is being manufactured. ‘ORIENTAL’ ensures that you get the best material which is free from any defect and are leak proof. Our Valves Bodies are made from different materials like Graded Cast iron, Carbon Steel, Stainless Steel, and in some cases non ferrous alloys to suit different work environments and needs of the compressors and its service. All valves are precisely manufactured with inter-stage quality tests during production.

The valve of a Reciprocating Compressor is considered to be the heart of the equipment, the success of a good designed valve is dependent solely upon the process in which it is being manufactured. ‘ORIENTAL’ ensures that you get the best material which is free from any defect and are leak proof. Our Valves Bodies are made from different materials like Graded Cast iron, Carbon Steel, Stainless Steel, and in some cases non ferrous alloys to suit different work environments and needs of the compressors and its service. All valves are precisely manufactured with inter-stage quality tests during production. ORIENTAL has a large inventory of valves of different varieties including ported plate, channel type, concentric ring, poppet type as well as others. Valves manufactured by ‘ORIENTAL’ can sustain different operating pressures in variable circumstances varying from vacuum to 10000 psig. ‘ORIENTAL’ compressor valves perform optimally even at high speeds of 1500 RPM. The valves are manufactured to suit all weather and environment, including applications in bone dry to wet gases as well as corrosive gases. The valves manufactured by ‘ORIENTAL’ are not only compatible with the original equipments, these valves are equivalent or supercede in performance, efficiency and service life with modified designs and materials.

Size : Customized

Material : Cast Iron

Application : Industrial

Valevs And Kits in few words can be beneficial due to its high efficiency, low noise and compact sized features. The efficiency of the compressor rests absolutely on the valves. Prolonged failure of valves can cause inefficiency and leakage from the part of the machine leading to the breaking down of the system. Valve requires a constant requirement of maintenance.

With the 50 years history of manufacturing quality spares for reciprocating air and gas compressors, ‘ORIENTAL’ has diversified its manufacturing endeavor to the field of varied compressors. Already being a trusted name in the field of reciprocating compressors ‘ORIENTAL’ is moving into the field of screw compressors.

Rod Seal Rings, produces high circularity Packing rings or seal rings with accurate thickness so that there is no passage between the piston rod and the packing cups, ensuring accurate sealing and lowest losses of expensive gases. The seal rings with accuracy also protect the piston rod from any sagging or scoring while containing the gases from leaking through the chamber into the crank case. Here again we offer variety of materials including high end durable polymers to run smoothly for longer life in different gas applications. Packing rings are lapped in very high pressure applications to get even better sealings with the cups.

Rider Rings, similar to the piston rings are chosen in accordance to the piston rings and give optimal support to the expensive piston and protect the even more expensive liner. Materials normally softer than the liners are chosen for such protection.

Pistons high quality cast iron and aluminum alloy pistons. ‘ORIENTAL’ also produces non Ferrous pistons required for compressing oxygen to avoid oxidization and reduce wear.

Piston Rod is taken to check on run outs and exceptional dimensional tolerances are adhered to. Furthermore, different surface coatings are used for hard facing the Packing area, including Chrome, Tungsten, Cerami-C and other form of case hardening where coatings are not required. ORIENTAL produces piston rods in AISI4140, AISI420 and AISI304 materials as per compressor requirements. Special care is taken to check on run outs and exceptional dimensional tolerances are adhered to. Furthermore, different surface coatings are used for hard facing the Packing area, including Chrome, Tungsten, Cerami-C and other form of case hardening where coatings are not required.

ORIENTAL piston rings are made as per piston and cylinder dimensions and specifications to suit various gas services. Accurate diameters with appropriate gaps help users to achieve best possible results while in operation under tough conditions. Various designs and suitable materials are chosen for service in different compressors to get optimal results.

ORIENTAL manufactures these rings again in soft metals and at times in polymers also. These avoid oil or oil fumes arising from the crank case through the cross head and connecting rods to enter the gas chamber, thus protecting wastage of expensive oil and saving the gas from contamination.

Oil Wiper Rings, These avoid oil or oil fumes arising from the crank case through the cross head and connecting rods to enter the gas chamber, thus protecting wastage of expensive oil and saving the gas from contamination.

Oil Separators maintain the quality of the discharge of the air and helps in preventing oil loss. The separator is utilized for visual monitoring as well. The residual oil which is being utilized by the compressor is channeled through the air oil separator unit.

Lubricants Full Synthetic PAGPOE blends giving life in excess of 8000 hrs.Partial Synthetic Blends of Base III hydro treated oils giving life in excess of 4000 hrs. Base II Mineral Oils for basic service and faster change intervals.

‘ORIENTAL’ offers a variety of Hose assemblies which can with stand the maximum operating temperature of 135 deg centigrade with specially blended temperature resistant polymers sourced from the best in the world. Sensors are sourced from world class manufacturers to match the reading capabilities of different compressor manuafcturer’s controllers, so that the correct readings and indications are received to the users to trouble shoot and carry out predictive and preventive maintainence. ‘ORIENTAL’ offers Sensors which are compatible to screw compressors such as Ingersoll Rand, Atlas Copco, ELGI and several other brands of screw compressors.

Hoses and Sensors a variety of Hose assemblies which can with stand the maximum operating temperature of 135 deg centigrade with specially blended temperature resistant polymers sourced from the best in the world. Sensors are sourced from world class manufacturers to match the reading capabilities of different compressor manuafcturer’s controllers, so that the correct readings and indications are received to the users to trouble shoot and carry out predictive and preventive maintainence.

ORIENTAL rider rings, similar to the piston rings are chosen in accordance to the piston rings and give optimal support to the expensive piston and protect the even more expensive liner. Materials normally softer than the liners are chosen for such protection.

Oil filters of a particular screw compressor prevent solid particles from damaging the rotors and bearings. The filter specifically prevents the compressor being damaged by an insufficient supply of oil. ‘ORIENTAL’ has achieved the niche in developing oil filter with drain and pressure relief valves. The oil filters are interchangeable and provides shield for the variable equipments of the compressor.

Full Synthetic PAG/POE blends giving life in excess of 8000 hrs. Full Synthetic PAO fluid giving life in excess of 8000 hrs. Partial Synthetic Blends of Base III hydro treated oils giving life in excess of 4000 hrs. Base II Mineral Oils for basic service and faster change intervals.

Material : Cast Iron

Size : Customized

Centrifugal compressors compared to other compressors are expensive piece of equipments. These are fluid flow dynamic machines which are required for compression of gasses. Centrifugal compressors are constructed according to 2 configurations. These are either horizontally split construction or barrel type construction. Integrally geared centrifugal can operate at speeds much more than any other compressors. These are more reliable compressors which are targeted toward large scale factory level enterprises. Air Oil Filters Coolers Lubricants Rotors, etc.

‘ORIENTAL’ separators are manufactured using the best quality glass fiber media as per or superior to the specification of the OEMs. ‘ORIENTAL’ separators are constructed with the amalgamation of multilayered extremely efficient glass fiber, filter paper, glass woven sheet and filter media. It minimizes the oil flow and oil losses in the compression system and makes the compressor run smoothly.