Peek Sheet Dealers

• Size: Sheets : 1 to 100 mm, 1m x 2m, 1m x 620 mm Rods : 5 to 200 mm Dia L 1m & 3m
• Type: Peek Sheet
• Material: Peek
• Thickness: Sheets : 1 to 100 mm, 1m x 2m, 1m x 620 mm Rods : 5 to 200 mm Dia L 1m & 3m
• Application: Industrial, Medical Engineering , Aviation Industry, Electric Industry
• Color: Natural & Black
• Thickness: Sheets : 1 to 100 mm, 1m x 2m, 1m x 620 mm Rods : 5 to 200 mm Dia L 1m & 3m
• Usage: Medical Engineering - Aviation Industry - Electric Industry
• Name: PEEK Sheets
• Brand Name: SustaPEEK®
• Density: 1.32 g/cm3

Peek is part of a family of polyarylether ketones (PAEK) but the peek acronym is most recognized. Related chemistries based on PEK and Peek offer unique thermal benefits to the traditional PAEK Peek is recognized as having the best balance of chemical resistance, wear resistance and best heat resistance among all thermoplastics. It is melt processible allowing for processing into shapes by extrusion and injectiion molding.   Peek is known for its exceptional chemical inertness including to saturated steam .only a few halogenated acids like HF will affect PEEK. Peek poymers have a softening temperataure of 175 – 200oC and a melting temperataure of 350oC. Peek material complies with FDA regulation 21 CAR 177-2415 for repeated food contact. PEEK also has V- O flammability ratings and exhibit vey low smoke and toxic gas emission when exposed to flame.   Key Features Excellent chemical resistance Very low mositure absorption Inherently good wear  and abrasion resistance Unaffected by continous exposure tohot water or stream Peek Filter Grade : Peek is available in carbon & Glass Filled, Requirement for some extraordinary wear and heat resistant, bearing materials for chemically tough service conditions. PEEK Filled Grades are not  FDA Approved.

• Thickness: 0-1 mm,2-3 mm,1-2 mm
• Color: Brown
• Application: Industrial
• Shape: Rectangular
• Length: 1000 to 3000 mm
• Density: 1.51

Consider our name for acquiring qualitative products in any quantity, safe and time-bound deliveries are what we ensure. Based in Mumbai(India), we are in the business of supplying products that are reckoned for their quality and excellence.

• Type: Solid
• Material: PEEK
• Color: Available In Many Colors
• Finishing: Glossy
• Tensile Strength: 40-80 Mpa
• Elongation: 45%

PEEK sheet Polyetheretherketone (PEEK) offer the highest chemical resistance of any semi-crystalline plastic with excellent retention of mechanical properties up to 570°F (300°C). PEEK offers a combination of superlative properties that allow it to replace metal in some of the most severe end-use environments.Key Features : Exceptional chemical resistance to organics, acids and basesHigh mechanical strength in excess of 250°C (482°F)Very good wear and abrasion resistance Low CLTE and high limiting PV properties Best-in class fatigue resistanceExcellent dimensional stability Excellent resistance to hydrolysis in boiling water and superheated steam Superior dielectric with low loss at high temperatures and frequencies Ease of processingHigh purity Typical Applications : Aircraft Hardware and fasteners Aircraft mechanical components Automotive electrical/electronic Transmissions/powertrainS emiconductor fabrication and testing Medical devices Dental cassettes and devices Oil and gas processing equipment Bearing retainersGears Bushings SealsThrust washers

We are offering peek sheet, plate. Peek sheet - (from 5mm to 50mm thickness) grades : virgin, 30% glass filled, 30% carbon filled, self lubricated standard length is width 500mm x 1000mm long. Cut sizes also can be supplied.

• Country of Origin: India
• Type: Peek Sheet
• Material: Peek
• Shape: Rectangular
• Application: Industrial
• Color: Creamy
• Appearance: Modern
• Finishing: Polished

• Thickness: 3-6 mm
• Finishing: Powder Coated
• Size: 1220mm * 2440mm
• Features: Optimum Strength
• Brand Name: Areca Alupanel
• Production Capacity: 500000/month
• Pattern: Plain

peek (polyetheretherketone) is a high-performance engineering plastic with outstanding resistance to harsh chemicals, and excellent mechanical strength and dimensional stability. It offers hydrolysis resistance to steam, water, and sea water. Peek has the ability to maintain stiffness at high temperatures and is suitable for continuous use at temperatures up to 338ºf (170ºc). This engineering plastic has a proven track record in challenging environments such as aerospace, oil and gas, and semiconductor.

Leveraging on our experience, we are engaged in offering extensive range of PEEK Sheets. These sheets are reckoned for their wear resistance and flame retardant properties. These can be offered in specific sizes and are available in the highly competitive prices. Our range of product is widely used in making gears, seals, valve seats, bushes & bearings, distribution valves, insulation materials, chip carriers, thrust washers where material such as Nylon  cannot be used. Features : Low moisture absorption Good chemical resistance Very high heat distortion temperature Good electrical properties

PEEK (Poly Ether Ether Ketone) is a high performance engineering thermoplastic that offers chemical and water resistance similar to PPS, but can operate at higher temperatures. PEEK can be used continuously to 480°F (250°C) and in hot water or steam without permanent loss in physical properties. For hostile environments, PEEK is a high strength alternative to fluoropolymers. PEEK carries a V-0 flammability rating and exhibits very low smoke and toxic gas emission when exposed to flame.   Standard Sizes: Thk 8 mm to 25 mm; Size: 0.5 mtr x 1 mtr ; etc;  Custom Sizes available on request   PEEK Sheets, Rods & Tubes Offer:   Excellent chemical resistanceVery low moisture absorptionInherently good wear and abrasion resistanceUnaffected by continuous exposure to hot water or steam Other Variants Available: 30% Glass Filled PEEK, 30% Carbon Filled PEEK, 15% PEEK filled PTFE, etc  

Petrorays brings to you POLY ETHER ETHER KETONE engineering plastic extruded stock shapes available in PEEK NAT & PEEK CF grades are part of a range of high performance engineering plastic products offered for machining intoindustrial components. Peek rods are made using best raw material in modern production facility under strict quality confirming to international standards. Poly Ether Ether Ketone known, as PEEK is a semi crystalline thermoplastic with high tensile strength,stiffness, good wear resistance, low coefficient of friction, excellent chemical resistance and very lowmoisture absorption. Peek sheet range of useful properties in addition its ability to retain them over a longperiod under elevated temperature mechanical stresses and demanding environmental condition make it apremium engineering plastics of choice for many applications. Poly Ether Ether Ketone is commonly specified for high temperature applications requiring combination ofthermal, chemical and combustion properties. Electrical Properties of Poly Ether Ether Ketone are not influenced by limited moisture uptake under working conditions. We are manufacturers, suppliers, and exporters of peek rod and sheet in Mumbai, India to all over the world. As a result, Poly Ether Ether Ketone exhibitsexcellent dimensional stability and dielectric properties. Filled grades of Poly Ether Ether Ketone offerenhanced tribiological and other properties for demanding custom application. Poly Ether EtherKeytone is amenable to standard metal working machine tools and can be fabricated with ease to yield smooth surface finish. Information on technical properties for designers is provided below.   Application   Automotive Electronics Chemical Aero - space Medical Food Oil Exploration   Advantage   Very high service temperature Good chemical and hydrolysis resistance Excellent Dimensional stability High life Expectancy High Mechanical properties at elevated temp Good wear and frictional properties Good insulating Properties Excellent Machinability

peek sheet, Bakelite Rods, plastic dishes, vent cap

peek sheet, Wooden Brush, Pin Bar Brush, Tailor Made PTFE Products

PEEK ( Ketone ) Sheets & Rods, Nylon Sheet And Rods

We are leading manufacturer and supplier of huge range of Peek Sheets.

peek sheet, Pu Tubes, Pu Sheets, Pu Rod, Ptfe Tubes, PTFE Sheet

peek sheet, Delrin Rod, GSM Roller, Air Regulators, uhmw polyethylene

peek sheet, Plastic Cover Blocks, plastic chip

Peek Sheets, Plastics Storage Bins, mechanical expanding shafts

PEEK Rods & Sheets, Peek Bush, extruded nylon rods, Sheets And Tubes

peek sheet, Plastic Machine Sprocket, Nylon Machine Parts

Peek Sheets, Non Asbestos Ceramic Millboard Sheet, ptfe thread sealant tape