Pin Bush Couplings Dealers in Kolkata

• Material: Cast Iron
• Surface Treatment: Polished
• Weight: Approx 8 Kg
• Temperature: -40 to 100 Degree C
• Torque: 4-980 N.m

• Material: Metal
• Industry Application: Pump , Compressor , Fan , Conveyors , Crusher , Mill etc.
• Use: Used to connect the gear shaft to the driven machine
• Operation Type: Vertical or horizontal
• Torque range: Between 200 Nm and 1,300,000 Nm.
• Bore options: Parallel or Taper

Introduction This is modified form of the protected type flange coupling. This type of coupling has pins and it works with coupling bolts. The rubber bushes are used over the pins. The coupling has two halves dissimilar in construction. The pins are rigidly fastened by nuts to one of the flange and kept loose on the other flange. This coupling is used to connect shafts which having a small parallel misalignment, angular misalignment or axial misalignment. In this coupling the rubber bushing absorbs shocks and vibration during its operations. This type of coupling is mostly used to couple electric motors and machines. Salient Features Frequently, the coupling is used to connect the gear shaft to the driven machine. Up to 96 KNm; 548 in.lbs. 80 or 90 shore hardness close fitting flexible elements. Steel or cast iron hubs. Brake drum or disc available as well as special designs. Simple Assembly. Advantage : Flexible fail-safe pin and bush coupling for medium up to high torques. Low weights and mass moments of inertia. Independent of direction of rotation (suitable for reversing operation). Suitable for plug-in assembly (blind assembly, bell housing installation). Can be used in potentially explosive atmospheres.

Unique PB Pin Bush Coupling is used in general engineering applications for reliable power transmission under normal shaft misalignments. Couplings dampen shocks and vibrations. Progressively increasing stiffness characteristics of special shaped buffers ensure control of vibration amplitude for protection of equipment. Couplings can take considerable overloads.Standard range has hubs of Cast Iron. For special applications couplings with forged steel hubs available. Also available couplings with Brake Drum Couplings with spacer. Pin Bush coupling is a modified form of the protected type flange coupling. A Pin Bush coupling has pins and it works with coupling bolts. The rubber or leather bushes are used over the pins. The coupling has two halves dissimilar in construction. The pins are rigidly fastened by nuts to one of the flange and kept loose on the other flange. This coupling is used to connect of shafts which having a small parallel misalignment, angular misalignment or axial misalignment. In this coupling the rubber bushing absorbs shocks and vibration during its operations. This type of coupling is mostly used to couple electric motors and machines.  

• Size: Available In Different Sizes
• Material: Metal
• Shape: Round
• Color: Grey
• Thickness: 10-20mm
• Fetatures: Crack Proof, Excellent Quality

Flexocon Pin bush type flexible Couplings are of the cushioned drive type, transmitting the torque, through high Tensile bolts to the machine input shafts. Special Rubber Compounds are used in bushes so that it can absorb slight misalignments, tensional vibration and shock loads. The flanges are made of high grade cast iron. For special applications cast steel flanges are also manufactured. Flexocon offer 20 standard models of Pin bush coupling with rating range from 0.81 KW to 249 KW at 100 rpm. Flexocon also manufacture Pin bush type Brake Dum cum flexible couplings of different diameter to suit standard as well as non standard brakes.   Features No lubrication required. Accommodates misalignments. Damps out vibration. Reversing resiliency against shocks. Easy installation and removal. Inexpensive.

We offer pin bush coupling, pin bush coupling, pin bush coupling, pin bush coupling, pin bush coupling, pin bush coupling, pin bush coupling, pin bush coupling.

• Pin Bush: coupling

We are offering pin bush coupling pin bush flexible bush type couplings are designed for lower stresses on the rubber bushes and pins. Greater flexibility and life compared to other types of pin bush couplings is assured. The standard range covers torque rating upto 15000 kg. M.

Pin Bush Flexible Bush Type Couplings are designed for lower stresses on the rubber bushes and pins. Greater flexibility and life compared to other types of pin bush couplings is assured. The Standard range covers torque rating upto 15000 Kg. M.  

Pin Bush Couplings are generally used in such industrial applications where limited misalignment of shafts is compulsory. Pin Bush Couplings have two Hubs made of cast iron and variable number of flexible elements, depending on the power to be transmitted. The flexible elements of rubber bushes are capable of damping vibration and shock loads as well as accepting misalignment that inevitably occurs between rotating shafts which are independently supported. Our Pin Bush Couplings are suitable for rotation in either direction and do not require lubrication. The provided rubber ensures safety of Pin Bush Couplings against bad effect of water, dust and atmospheric conditions. Highlights Durable Smooth finish Efficient performance No lubrication is needed

We are a well-reckoned Pin Bush Couplings Manufacturer and Supplier, based in India. These Pin Bush Couplings are made from the finest Cast Iron, Stainless Steel, Steel Alloys, etc. as per the set industrial quality standards. Our Pin Bush Couplings are resistant against corrosion and abrasion and can bear adverse conditions.

The construction of Techstar Pin Bush type flexible coupling is simple and compact. The flanges are made of C.I. confirming to FG 200 I.S : 210-1978 and pins which transmit torque, are made of high tensile steel. Highly developed rubber compound is used in bushes to capable to work in all most all the environments normally found in Indian industries. Where oil, grease, acid, heat etc. are present,  

HIGHSPEED brand Pin Bush (with reinforced elements) flexible coupling consists of a pair of coupling hub and a number of steel bolts (pins) fitted with synthetic reinforced rubber bushes. It is designed to absorb shock load, torsional vibration and slight misalignments.

Flexocon Pin bush type flexible Couplings are of the cushioned drive type, transmitting the torque, through high Tensile bolts to the machine input shafts. Special Rubber Compounds are used in bushes so that it can absorb slight misalignments, tensional vibration and shock loads. The flanges are made of high grade cast iron. For special applications cast steel flanges are also manufactured. Flexocon offer 20 standard models of Pin bush coupling with rating range from0.81 KW to 249 KW at 100 rpm. Flexocon also manufacture Pin bush type Brake Dum cum flexible couplings of different diameter to suit standard as well as non standard brakes.   Features   No lubrication required.  Accommodates misalignments.  Damps out vibration.  Reversing resiliency against shocks.  Easy installation and removal.  Inexpensive.

PIN BUSH COUPLINGS : Simplicity in Construction. Accommodates angular , parallel and axial misalignment. Low operational cost. Easy assembly and maintenance. No lubration is required. V arying stiffness characteristics.

PU Coupling, Rubber Bushings, Rubber bush vt pump

With the aim of delivering qualitative products, we are engaged in offering our clients with an excellent quality Pin Bush Coupling. Ideal for various applications, this coupling is provided in different technical specifications as per the different needs of the various clients.

Pin Bush Coupling, Gear Coupling, Grid Coupling, Tyre Coupling

Pin Bush Couplings, grooved hearth furnace, pit type gas carburizing furnaces

Pin Bush Couplings, Nut Bolts, Cutting Tools, mechanical power transmission

Pin Bush Coupling, POWER TRANSMISSION COUPLINGS, Resilient Coupling