Process Control Equipment Dealers in Bbd Bag, Kolkata

all types of pressure & temperature process contol instruments.

• Features: High accuracy, repeatability. High insulation resistance (>100 M ohm @500 VDC at 250C) Fast response Mineral insulated construction enables the sheath to be bent / routed to suit installation without affecting performance.

Resistance Temperature Detector(RTD) used for temperature measurement -50 to 400 Deg.C. The system accuracy begins with proper primary sensor selection. Various considerations apply to the design of RTD assemblies. The element should be protected from shock and vibration, yet free of expansion stresses that may shift the reading. The element assembly needs to be isolated without obstructing heat flow. The outer sheath has to withstand pressure, erosion and vibration, yet it should be small enough for easy installation and rapid response to temperature changes.

• Brand Name: Optibelt

Optibelt allows you to accurately measure the tension of belts in Hz, using its proprietary Belt Tensioning Instrument known as the Tension Tester Line!

Siemens Water Level Controller Relay and Sensors used for controlling the water level in a single/ dual tank operating on 110-240V AC/DC Current.

• Condition: New, Used
• Display Type: Analog, Digital
• Theory: Bimetal Thermometer, Temperature Controller, Temperature Recorder
• Brand Name: Mistura technologies
• Power: 100 to 240 VAC
• Type: Digital
• Size: 48*96 mm
• Current: 5 A
• Warranty: One year

• Size: 48 x 48 mm
• Temperature Range: 100 Degree Celsius
• Accuracy: 0.25%
• Display Type: 3 Digit/7 Segment
• Voltage: 24 VAC/DC
• Frequency: 50 Hz
• Brand: Selec
• Control Type: PID
• Input Type: Thermocouple
• Control output Type: SSR
• Resolution: 0.1/1 Degree for TC/RTD
• Mounting Type: Panel
• Model: TC 303

• Feature: Non-contact Infra-Red thermometer with laser pointer measures to 900oC / 1652oF

This is a brand new CEM IR-91 CE certified digital non-contact infrared thermometer with built-in laser pointers and back-light LCD display. This top-of-the-line device has a super narrow 50:1 distance to spot ratio and a wide range of -31 oF to 1652 oF (-35 oC to 900 oC). Forget the old analog devices, this newly designed digital light weight device gives you accurate measurement from safe distance. The build-in laser pointer help you aim better at the object for an accurate result. The back light LCD screen allows you to read easily in the dark. The industrial panel design allows easy integration of the meter with the existing work bench. It keeps your work environment neat and clean.

• Voltage: 230V

We are manufacturer of Boolians, Digital fully Automatic Pump Controller or water level controller for your home and Industry. It continuously monitors the liquid level of the overhead tank and reservoir. The Automatic pump controller controls the water pumps and turns it ON and OFF with respect to the level in the water tank. This auto-switching feature saves manpower. Hence no need to operate manually. Our system switches the pump when the level of water in the tank goes below LOW level and OFF when the water exceeds the HIGH level. Thus no wastage of water, stop tank overflow, save water, electricity bill, time and water charges. Fully automatic electronic device using sensor for controlling water levels of overhead tank and reservoir to pump operation. (Includes Bore well tubewell indara).ensors automatically stop the pump when water reaches a particular level and start the pump when water goes down at a particular level in the overhead tank provided the water is available in the reservoir at a particular level.

• Brand Name: Selec
• Size: 48 x 48 mm
• Control Type: PID/On-Off
• Display Type: 3 Digit/7 Segment
• Mounting Type: Panel
• Voltage: 90-270 VAC/DC
• Frequency: 50/60 Hz
• Model No.: TC513AX
• Input Type: Thermocouple, RTD
• Control output Type: Relay/SSR
• Resolution: 1 Degree C

• Model No.: 48VFL11

48VFL11 Temperature PID controller offers Fuzzy Logic enhanced PID and a Soft-Start feature that protects heaters from cold-starts. PID plus Fuzzy Logic tackles even the most demanding applications, eliminating over-shoot, unwanted process fluctuations, and drift. The Soft Start feature is ideally suited for processes, such as those employed in the Thermo-Plastics industry, where careful, exact, and slow heating of product is required. Accepts thermocouple and RTD inputs. Single stage Ramp and Soak program with Ramp-to-Set point Limit that can be combined with the Soft Start feature for critical process demands. Complete with mounting bracket hardware and screw terminals for easy wiring. Also available with 4-20mA output (48VFL13).     Features:   One relay outputDual 4-digit LED displays of process and setpoint valuesUser friendly menus and tactile keypad for easy programmingOne-touch autotuning for quick setup & precise controlFuzzy Logic PID offers intuitive control simulating human control logicTwo "Latching" alarm relays standard with 8 Alarm modesAccepts thermocouple and RTD inputsThis product is also available with 4-20mA output - 48VFL13

We are offering water level controller. wl21p a low cost, reliable, ic based water level controllers. It keep constant watch on the water level and switch on or off the pump motors subject to availability of water at the reservoir and requirement level set at the upper tank. working principle: series pwl21p is designed to operate with electrode type to sense the water level. Stainless steel sensors with connector box are installed both at over head tank and reservoir. no dry run of motor and no over flow of water: sensors installed in the reservoir senses the availability of water in it. The sensors at the overhead tank is preset with a level at which the pump is to operate and switch off on reaching upper level. The pump is switched on only if the water is available at the reservoir. The system ensures no over flow from the overhead tank and no motor burn out due to dry running . auto/manual/off selection: the controller has auto/ manual/ off selection switch on the front panel. Under manual mode pump can be switch on manually, if the switch is in center- off position, motor remains off. This option may be required in emergencies and for cleaning up the electrodes or water tanks. protections: the controllers has built in protections for a) over/ under voltage protection the controller protects the motor from running at low/ high voltage thus saves the motor burnout. b) over load protection: electronics based over load circuit switches off the motor if load drawn exceeds the pre-set value and thus protects the pump motor from damages. indications: the controller is provided with following led indications: a) undervoltage b) overvoltage c) overload d) pumpon e) lowtank f) fulltank g) mainson housing: the controllers are housed in sheet steel enclosures finished with power coating paints. They are suitable for wall mounting. direct operation: up to 2 h.p. 1 ph. Phase on demand, higher rating can be supplied.

Digital Temperature Scanner, Blind Temperature Controller

process control equipment, control instrument, Process Control Instruments

process control equipment, Engineering Products, Measuring Tools

Maximum Demand Controller, Energy Meters, Electrical Testing Equipment

Tamper Proof Speed Controller, magnetic tracking level switch

process control instrument, Mill Scale, instrument, earthmoving machine

RTD Sensors, Gas Analyzer, Digital Electromagnetic Field Tester

Temperature Controller, Damper, pnumatic position control power cylinder

Process Control Instruments, Control Panels, flow sensors, Level Gauges

Digital Temperature Controllers, moulded cable assemblies

controllers, control panel accessories, electric counter, Timers, COUNTER

Temperature Controller, Compensating Cables, Solid State Relays

process control equipment, Electronic Component, Integrated Circuit

pid controllers, Linear Guide

solid state temperature controller, Line Voltage & Frequency Monitor

Digital Controller, Generator Rotating Rectifier, Rotary Switches