Process Control Equipment Dealers in Kolkata

Thermocouple assembly with fixed adjustable connection having customized design and length with weatherproof flameproof explosion proof with moc ss 304, 316, 316l, inconel etc.

Fully Automatic Pump ON off controller  1yr manufacturer warranty 

• Power Source: Electric
• Theory: Temperature Sensor
• Accuracy: 0.6°C Or 0.1%
• Condition: New
• Uses: Industrial
• Temperature Range: 0 to 600 Degree C

The company is involved in the business of manufacturing, exporting and supplying durable and efficient Solar Pump Inverter. It is a transformer-less inverter system with 415 Vac, 3-Phase output voltage and V/F control to manage pump starting condition (soft start). Our Solar Pump Inverter is micro controller based and operated using software for digital control of inverter parameters, fault finding, etc.Highlights : Multistage Submersible Pump Uses peak power tracking controller & variable frequency Makes it simple to pump large volume of water from depth maximum up to 450 ft. Converts DC array power directly to 3-phase AC with high efficiency Three level of lightning protection to protect the unit in storm conditions Special Features : Shuts down the pump in dry-run mode Standard commercially available off the self-pump, interchangeability is practical & inexpensive Designed for high-ambient temperature reaching up to 90oC continuous operation Remote alarm circuit on the system fault Equipment complied with EMC regulation (C-Tick Compliance) Operates without battery support

Siemens Water Level Controller Relay and Sensors used for controlling the water level in a single/ dual tank operating on 110-240V AC/DC Current.

• Features: Greater precision,Consistent performance,High functionality

This product is designed to control two Air Conditioners(A.C. or AC) simultaneously. The industry standard AVR Micro-Controller is the heart of this system. Control over the ACs are performed according to some parameters like temperature, phase voltage, phase current, swapping time etc. User can set or view various parameters like current temperature, phase current, phase voltage, temperature set-point, high room temperature, swapping time, AC trip current, A.C. last trip reason etc. through a 16 x 2 character LCD panel and a status indication panel will help user quickly monitor the status of the ACs. An alarm system generates respective alarm for FMC if any error occurs in the operation. This system keeps the information of last AC trip reason and the overload current at which the Air Conditioner (A.C.) was last tripped in a nonvolatile memory for up to 100 years or the next trip occurs. This devise is fully compatible with VOLTAS SENSICOOL Air Conditioners (ACs) used in the shelter of a mobile tower.

• Country of Origin: India
• Type: Semi Automatic/ Automatic Pump Controlle for Domestic and Industrial Pumps
• Material: Metal
• Application: High Rise Building & Industrial Application
• Automation: Automatic
• Brand Name: Keeps ON Devices
• Warranty: 10 Yrs.
• Installation Type: Wall Mounting
• Model No.: KACP-5022

• Power Supply: 230V AC / 24V DC
• Digital Input/Output: DI/DO can be Relay or Transistor type (mostly 24V DC)
• Analog Input/Output: 4-20mA, 0-10V DC
• Communication: TCP, Serial Interface or other Communication Interface
• Programming Language: Ladder Diagram (LD), Function Block Diagram (FBD), Structured Text (ST)
• Model: As per project requirement
• Make: As per project requirement

  We provide Programmable Logic Controller (PLC) Panels depends upon customer requirement. It is well known for its precise dimensions & efficient performance. We have widely used Programmable Logic Controller (PLC) Panels for automation of industrial process control. Which combine control of machinery on factor and also for any process plant we offer the Quality brands from the globe. Most important we provide productive after sales support.

all types of pressure & temperature process contol instruments.

• Brand Name: FaceITSystems
• Warranty: 1year
• Country of Origin: India
• Condition: New
• Automatic Grade: Automatic
• Driven: Electric

P57 : 7” High Speed, AI based Face Recognition Access Control & Attendance System with following features: 7-inch display screen face recognition and access control device 50,000 face Users in 1:N mode 100,000 Attendance Transaction Records Support offline local face recognition and binocular liveness detection Support Face Mask detection, Safety helmet detection, and Live body detection Face recognition Speed ≤0.15 Sec., recognition accuracy rate ≥99%; Support time attendance function Support access control Locks like EM Locks, Drop Bolt, Auto doors etc. Support Wiegand output protocol Size : 231(H)*129(W)*25 mm

• Maintain constant temperature at Dryer Inlet (T1) results in to enhance the tea made quality consistently: Minimize the production cost by optimum use of coal and electrical energy
• Minimize air pollution by ensuring the proper combustion of coal: Reduces the Heater maintenance cost
• Payback period for investment is around 6 months depend on manufacturing practice and coal quality One CARC-04 is suitable: Rugged frequency drives are used with best possible protection to avoid failure due to power fluctuation

Present heating practice of tea 1. The present heating practice in tea industry is to maintain pre-determined temperature of inlet and exhaust air, based on experience. But due to manual control over the three major components of the heater, e.g., id fan, fd fan & chain grate stoker according to the need, the temperature keeps on fluctuating, causing inconsistency & quality deterioration in tea made. 2. As per prevalent and commonly used practice of manual control over the heaters, more fuel as well as more electrical power than actually required is consumed for drying of tea. Consequently, the factory suffers from the detrimental effect of rise in cost of the end product. To overcome from above explained problems stesalit has introduced carc–04 to maintain the constant inlet temperature in dryer. System overview coal air ratio controller (carc-04) is a time tested and proven product at tea factories. Carc-04 offers to overcome the existing problem of inlet temperature variation due to manual operation in dryer through a close loop control system. Carc-04 maintains the combustion chamber temperature constantly by varying the speed of chain grate, fd fan and id fan precisely within the permissible level which in turn maintains the preset and preferred inlet air temperature to dryer. salient features advantage • rugged frequency drives are used with best possible protection to avoid failure due to power fluctuation • maintain constant temperature at dryer inlet (t1) results in to enhance the tea made quality consistently • minimize the production cost by optimum use of coal and electrical energy • minimize air pollution by ensuring the proper combustion of coal • reduces the heater maintenance cost • payback period for investment is around 6 months depend on manufacturing practice and coal quality one carc-04 is suitable

• Brand Name: Optibelt

Optibelt allows you to accurately measure the tension of belts in Hz, using its proprietary Belt Tensioning Instrument known as the Tension Tester Line!

L.D. BHATTAR & CO SOURCE TO ALL CABLE REQUIREMENTS Home About Us Products Enquiry Contact Us     As the generated voltage in the thermocouple circuit depends upon the difference of temperature between the hot and cold junction of the thermocouple, the accuracy of the measured temperature of junction depends on keeping the other junction at a known constant temperature. The temperature in the connection cap isn’t constant. For this reason the legs of the thermocouple are extended by means of COMPENSATING CABLE LEADS made of material which will not produce, in junction with the thermocouple metal, any additional voltage. Thus the COMPENSATING CABLE LEADS effectively extends the junctions of the thermocouple to a convenient point of constant temperature ensuring the accuracy of the measured temperature for which the thermocouple is used.

This product is basically used in industry or domestic purpose. Specification basically depends upon the building floor and rate will also depend upon this.

This product is designed to control two Air Conditioners(A.C. or A/C) simultaneously. The industry standard AVR Micro-Controller is the heart of this system. Control over the A/Cs are performed according to some parameters like temperature, phase voltage, phase current, swapping time etc. User can set or view various parameters like current temperature, phase current, phase voltage, temperature set-point, high room temperature, swapping time, A/C trip current, A.C. last trip reason etc. through a 16 x 2 character LCD panel and a status indication panel will help user quickly monitor the status of the A/Cs. An alarm system generates respective alarm for FMC if any error occurs in the operation. This system keeps the information of last AC trip reason and the overload current at which the Air Conditioner (A.C.) was last tripped in a nonvolatile memory for up to 100 years or the next trip occurs. This devise is fully compatible with VOLTAS SENSICOOL Air Conditioners (A/Cs) used in the shelter of a mobile tower.  Where to buy  

DC controller is a machine that supply the accurate voltage & ampere to the laptop in the repairing process so that we can understand any type of power related problem to the laptop.

• Application: Industries

Packing machines Thermocouple 

1.rtd sensor, make - tempix, length -12"below head , od - 8mm , 12 "bsp connection, temperature range 400 deg. and 2.thermocouple , type - k , length 12" below head , od - 8 mm , connection - 12 bsp , temperature range - 800 deg.

We are a noted Manufacturer, Exporter & Supplier of Programmable Logic Controller. Our organization is widely acknowledged for offering an exceptional range of Programmable Logic Controllers that are precision engineered and offers excellent performance. This Programmable Logic Controller finds wide applications in textile, paper and food industries. We provide user friendly, easy to install & operate and efficient Programmable Logic Controller to the clients at competitive prices. Used In : Textile industryPaper industry Food industry

• Application: INDUSTRIAL
• Type: Automatic
• Model Name/Number: PC 07
• Operating Range: 0 Degree to 150 Degree C
• Resolution: 1 degree
• Make: APU ENTERPRISES
• Input supply: 150-270 VAC
• Rate of heating: 0.5 deg. To 9.5 deg Celsius per min. (adjustable )

• Feature: Microcontroller based Digital Temperature Indicator, Seven Segment Brighter LED Display, Compact size available, Easy to use

• Brand Name: Siemens/Rockwell/Mitsubishi/Fuji
• Model Number: Siemens-LOGO/200 Smart/1200/300/400

Micro, Modular or Large Automation System involving PLC, HMI/Scada, Servo, etc. Specialist in SIemens and Fuji

Range :10 m mho to 999 m mho in 5 ranges.Display : 3 ½ digit LED .Input Frequency:1000 Hz.Accessories :Conductivity cel , Temperature Probe, Manual, Dust Cover.Dimension :215x190x25 mm.

• Color: Black
• Features: Easy to use, High efficiency, Precise sensitive controls .
• Brand: Siemens
• Usage/Application: Industrial