Salts and Chemicals Private Ltd. Kolkata, West Bengal

ANTISCALANT FOR SUGAR JUICE EVAPORATORS HYDROCHEM 505 : An excellent anti-scaling chemical specially designed for the control of scale formation in sugarcane juice evaporators.

Country of Origin : India

Type : Pure

Form : Liquid

  PASSIVATING CHEMICALS : Zinc is also a sensitive metal which forms white rust on exposure to air and moisture. The corrosion products give an unsightly, mottled surface consisting of the loose powder that makes it unfit for the industrial and domestic uses. White rust damages long-term protection of the base steel. Passivation of the galvanized surface is inevitable for long life of the articles. 1. Alibond 292 – It is a hexavalent chromium based chemical process, which produces a protective colourless chromate conversion coating on galvanized iron. The coating protects the surface from corrosion and finger staining and renders a gloss to the surface. It can be used by dip or spray. 2. Alibond 304 – Due to the hazardous nature of hexavalent chromium industries prefer trivalent chromium based products. It is a trivalent chromium based chemical process, which produces a protective almost colourless to very light bluish chromate passivating film on galvanized iron. It can be used by dip or spray in galvanizing plants and specially recommended for continuous strip lines. 3. Zipac 305 (Non chrome) – It is a unique eco friendly product free from chromium. It is a water soluble conversion cum passivating chemical, ideally suitable for zinc coated metal surfaces. The chemical forms a thin film over the zinc coated steel (G.I.), which forms a protective non-chrome layer to improve the corrosion resistance properties of the treated metal. ZIPAC 305 may also be used effectively for aluminium –zinc coated strips. The toxicity profile of chromium and pollution effect of chromates can be eliminated by using the new generation product in coil lines.  

Packaging Type : HDPR JAR

Brand Name : ALIBOND

Application : Industrial

Purity : 100%

Country of Origin : India

RO TREAT 102 is a polycarboxylate base highly effective liquid antiscalant developed to control scale precipitates within membrane separation systems. It can be used in reverse osmosis (RO), nano-filtration (NF) and ultra-filtration (UF) system.

Packaging Type : HDPE JAR

Brand Name : RO TREAT

Application : reverse osmosis (RO), nano - filtration (NF) and ultra-filtration (UF) system.

Country of Origin : India

Range : SALTBRITE BL 671 : Blue passivation chemical for Zinc / Cadmium surface. SALTBRITE GR 672 : Yellow passivation chemical for Zinc / Cadmium surface.

CORROSION INHIBITORS FOR OIL AND GAS FIELD HYDROCHEM 521 : An excellent corrosion inhibitor cum acid neutralizer in both liquid and vapor phase for oil and gas field and petrochemicals. It also protects corrosion caused by suphides and oxygen.

Country of Origin : India

Type : Pure

Application : Industrial

Range : Hard Temp 660 : A neutral salt normally used with Hard Temp A 453 regenerator for hardening tool steel and selectively carburised steel. Also used for preparing initial melts of carburising salts Hard Temp H 402. The salt can be used for preheating hot die steels and high speed steels prior to hardening. Working Range: 660° to 900°C (upto 1000 0C if covered with Hard Temp E 452) Hard Temp 720 : A water-soluble neutral hardening salt normally used with Hard Temp A 453 regenerator for hardening various tool steels and selectively carburised steels. Sometimes it is also used with 1 – 10% sodium cyanide as a scale free heat treatment medium. Working Range: 720° to 900° C (upto 950° C if covered with Hard Temp E 452) Hard Temp 830 : The salt is used with Hard Temp A 453 regenerator for hardening chromium rust resisting steels B. S. En 36 A-D and B.S. En 57.Working Range: 830° to 1100° C Hard Temp 970 : Used for heating high-speed steels and hot work steels to the appropriate hardening temperature without scaling or decarburisation. Working Range: 970° to 1350° C. Hard Temp 495 : Used for quenching and secondary hardening of high-speed steels preferably where the temperature required is 500° to 540° C. Working Range: 495° to 700° C Hard Temp 540 : Specially developed for quenching high speed steels and hot work tool steels after heating in Hard Temp 970. It is also used for secondary hardening of high-speed tool steels and for tempering. Working Range: 540° to 700° C Hard Temp 660 : A neutral salt normally used with Hard Temp A 453 regenerator for hardening tool steel and selectively carburised steel. The salt can be used for preheating hot die steels and high speed steels prior to hardening. Working Range: 660° to 900°C (upto 1000°C if covered with Hard Temp E 452) Hard Temp F 666 : A neutral salt for use with Hard Temp F 750.

Country of Origin : India

Country of Origin : India

Application : Industrial Use,Rust Removing

Form : Liquid

FLUXOL 336 is a liquid flux recommended for continuous galvanising line (C.G.L). It is used directly without any dilution. The flux is highly stable at galvanising temperature. Chemically active flux effectively removes impurities from the pickled steel to facilitate trouble free iron-zinc reaction.

Brand Name : FLUXOL 336, FLUXOL

Packaging Type : Plastic Can

Country of Origin : India

Physical State : Liquid

HYDROCHEM 7008 is a quaternary cationic polymer which is a specialized product for decoloring, flocculating,COD decreasing and other applications.

Country of Origin : India

Type : LIQUID

Brand Name : HYDROCHEM

Classification : DECOLORING

CAS No. : 55295-98-2

Purity : 100%

FLOCCULATING AGENT HYDROFLOC 7002 : An anionic high molecular weight flocculating agent in granulated powder form. Its performance is excellent in waste water treatment. If necessary the application may be followed with alum and polyaluminum chloride (PAC). HYDROFLOC 7003 P : It is a cationic flocculating agent available in powder form highly effective in removing suspended fine particles in river and pond water. Alum and polyaluminum chloride (PAC) may be used in conjunction with it for better performance. HYDROFLOC 7003 L : It is a cationic flocculating agent available in liquid form.

Color : Available In Many Colors

Country of Origin : Made In India

Shelf Life : 1 Year

Purity : 99%

Storage : Cool & Dry Place

HYDROCHEM 2001 A coolant used for all types of diesel engines. HYDROCHEM 2001 also acts as scale and corrosion inhibitor.

Country of Origin : India

Type : Pure

Application : Industrial

Temperature Range : 80°C

Form : Liquid

Soluble In : Water

Temperature Range : 80 °C

MOQ for Outside India : 1 Ton

MOQ for Domestic : 100 Kg

HYDROCHEM 211L is an excellent heavy-duty cleaner and brightener for removing heavy grease, tar and grime on aluminum fins, copper coils of AHU, FCU, Air Conditioners, Air cooled chillers, Air Cooled Condensers, Air Cooled Tube bundles etc. It is also used in machinery and many other hard surfaces including engines and gearboxes of road vehicles for cleaning.

Brand Name : HYDROCHEM

Packaging Size : 35 KG.

Range : Hard Temp H 402 : A carburising salt containing sodium cyanide and suitable activating agent. The carburising salt is capable of carburising mild steel and alloy case hardening steel upto depth of 2.5 mm. Working Range : 760° to 950° C Hard Temp F 750 : A salt specially developed for hardening high carbon steel files and medium or low carbon steel rasps. Slight decarburisation on the surfaces of the files can be removed by hardening in Hard Temp F 750. Working Range: 750° to 850° C. Hard Temp CN2 : A regenerator salt used in Hard Temp CN4 bath. Hard Temp CN4 : A specially designed base salt for nitriding of carbon steels, high speed steels and other type of alloy steels. Hard Temp CN2 salt is required to regenerate the bath. Working Range : 560° – 570° C. Additive 408 : An additive used in nitriding baths.

Type : Liquids Cleaning Chemical

Purity : 99%

Shelf Life : 24 Months