Structural Beam Dealers in Kolkata

• Material: Mild Steel
• Finishing: Polished
• Color: Grey
• Application: Construction
• Length: 6 - 12 Mtr
• Country of Origin: India
• Thickness: 5 - 16 mm
• Size: 100 x 50 x 300 mm
• Width: 50 - 300 mm

The Structural Steel Beams offered by us are in wide demand in the market because of its unmatched quality and anti-corrosive nature.

• Type: Structural Beams
• Thickness: 5-34mm
• Application: Industry, Construction, Bridge Girder
• Pattern: Hot Rolled
• Width: 80mm-900mm
• Surface: Machined
• Packaging Type: 20' or 40' Feet Containers

We are the main supplier of this product.

Shyam steel industries ltd. Is one of the leading manufacturing and supplying company of high quality structural steel beams from india.

We manufacture Beams (H Beams and I Beams), Channels, Equal Angles, Round Bars of various sizes and diameters as per IS specifications and customer choice.   PRODUCT SPECIFICATION PRODUCTSTEEL STRUCTURAL SECTIONS Chemical Composition Chemical Symbol % Limit % Variation Carbon C 0.10 – 0.23% 0.02 Manganese Mn 0.40 – 1.5% 0.05 Silicon Si 0.40 – Max 0.03 Sulphur S 0.05% – Max 0.005 Phosphorus P 0.055% – Max 0.005 Physical Properties Material will be supplied in killed (A1) condition with limiting carbon equivalent 0.42% Max Minimum Yield Strength 250 MPa Minimum Tensile Strength 410 MPa Minimum % Elongation 23 Nominal Dimensions of Rolled Structural Sections IS 80 Weight tolerance on per m length Channel and beam Upto 200 mm depth +4%, (-) 1% Other sections ±2.5 % Length Range 10 m to 13m   Customised length could be supplied based on supply terms and conditions Length Tolerance ± 250mm Size Tolerance/Weight Tolerance As per BIS Standard IS 1852 Grade of Material As per IS 2062, E 250 A   Sections in Cu – bearing steel and higher grade material could be supplied based on supply terms and conditions Weld ability Weld able with common M.S. electrodes without pre-heating Marking/Identification of Product Every Structural Section is embossed (hot rolling) with size detail, ISI mark and Co’s logo/Mark along the length at regular intervals. Ordering Information While placing an order, the following technical information would be needed:   Size & length of each piece and quantity Steel specification with grade/chemical composition/physical properties Test certificates requirement Special Requirements if any Design Standard: IS: 800 or any other equivalent international standard for structural design. Dead Load, Imposed loads and Wind loads to be assumed in design as per specified in IS: 875. Imposed Loads arising from equipment to be assumed in design as per manufacturer’s data. Earthquake Loads shall be assumed in design as per IS: 1893 Handlings Loads, Erection Loads, effect of temperature change and load due to settlement of foundation shall be considered as per IS: 800 stipulations.

Structural Steel H Beam, Square Billet, ISMB Section, Industrial Angles

Structural Steel H Beam, ISMB / I Section / Beam

Structural Beam, Gate Channel, Iron Beam, Steel Beam, Beam Channel