Switchgear Panels Dealers in Tangra, Kolkata

• Power: 1-3kw
• Voltage: 220V

We are one of the well known manufacturers and suppliers of apfc panels in kolkata (west bengal). Our company is reliable, as we have satisfied numerous clients with our energy-efficient apfc panels over the years. We make panels available in various configurations and also offer individually tailored solutions for the same. Buyers can order for apfc panels in bulk and expect timely delivery.   Our apfc panels are appreciable for the following attributes : user friendly wide voltage measuring range aesthetically designed enclosure easy to install suitable for indoor and outdoor use

We are offering apfc panel. Application : improvement of power factor in the system ac rating volts : 0 – 800v ac rating amps : 100 – 1000a ac rating frequency : 50hz rated insulation voltage : 690v temp. Rise : up to 35c rise over 50c ambient. degree of protection : ip 52, 54, 55, 65 power bus. Bar : al or cu. Bas bar over current protection : properly panel cote : 7 tank powder coated paint and as per client’s requirement. panel mount : floor / ground mounted, wall mounted, mounted on angle frame. current monitoring : possible phase monitoring : possible configuration : based on customer’s requirement. type test performed : short circuit with stand temp. Rise with stand, degree of protection. product warranty : at list 12 month.

We are offering perfectly designed Automatic Power Factor Correction (APFC Panel) in seven color tank procedure that is skillfully manufactured by our experienced and knowledgeable workers. We provide APFC Panel to the clients as per their requirements. Besides, we also provide on time delivery of APFC Panel within scheduled time period.

PDB Cum APFC Panel, change over panel boards

Ø  What is power Factor? Power Factor (PF) is the ratio of Power Utilized (KW) and Power Drawn (KVA). Generally, when the applied to the electrical motors, the entire power is not converted as useful Work Done (KW). Depending on inductance of the motor a reactive power (KVAR) is generated which results in drawing of excess KVA. PF = KWH / KVAH To reduce the KVA drawn, the inductive KVAR is to be nullified by introducing an equal and opposite Capacitive KVAR according to the load pattern, thus OPTIMUM PF is maintained. Ø  Why Power Factor must be maintained?   By maintaining an optimum PF the Power drawn (KVA) can be reduced, thus reducing the current passing through the electrical circuits to the maximum extent possible (event up to 50%) thereby reducing the machine down time. reduction in heat losses in turn increases the life of the electrical circuits. The State Electricity Boards (SEB’s) has installed Digital Electronic Energy (Tri-Vector) Meters for consumers, which has the provision of showing the PF and insisting to maintain the average Power Factor above a Specified limit (0.85 – 0.90 PF) Otherwise, for every reduction of 0.01 from the specified PF, PENALTY is levied on the Energy Consumption Charges (KWh) on the Electricity Bill. SEB’s are also offering PF incentives if the PF is maintained above the specified PF. In few states, where the metering unit is KVAh and if the PF is maintained at its optimum of 0.99, the electricity bill amount itself is reduced considerably. The optimum Power Factor can be maintained by installing Galaxy Electro Tech’s AUTOMATIC POWER FACTOR CONTROL PANEL Ø  Salient Features of Galaxy Electro Tech’s APFC Panel: Adjustment to any step of capacitor value Micro controller based technology. Digital computation of various parameters Continuous monitoring of parameters like Line Voltage, Current, Active, reactive and Apparent Powers and energies Scrolling Display on a Dot Matrix LCD Protection of Capacitors against damage due to High Voltage, Low Voltage Tends to maintain 0.99 lag Plug-in terminal connection No-Volt release features to disconnect all capacitors in the event of power failure Dynamic control of Reactive Power and Power Factor RS 232 / RS 485 Standard output port (optional) Fine & Coarse correction Controller Ø  Benefits of Galaxy Electro Tech’s APFC Panel: Power Factor penalty is avoided Avail incentives by maintaining optimum Power Factor Optimize the capacity by reducing the maximum demand KVA Avoids excess demand charges Improvement in line voltage Reduced line current losses and cable overheat Enhanced life of electrical circuits Avail Depreciation Reduced consumption (KWH) charges Avoids overloading of Distribution Transformers Additional Service connections in existing generation of power by reducing Energy Losses Reduced line losses Benefits SEB’s and Nation Galaxy Electro Tech’s APFC Panels are available from 25KVAR – 2500KVAR  Model onwards

We specialize in providing different types of Motor Control Center (MCC) Panels that are highly appreciated in the electrical industry. These panels are manufactured using high grade raw material and therefore, exhibit high end features. Moreover, these panels are compartmentalized / non – compartmentalized type panels with ACB / MCCB, SFU &DOL. Following are some of the specifications of these products : ATS or star Delta Starters Fully Draw out Type (Incomer and Outgoing Feeders) / Non-Draw out Type Single / Double Front Operated

MAIN SUB- STATION ACB PANEL, ACB Panel, MCCB Panel

metal switch boards, feeder pillars, Electric Panel Board

Relay Panel, LT Panel Board, distribution switchboards, Electrical Pole Box

ac controller, high tension switch gear, low tension switch gear