Back Back
transmission poles
Transmission/distribution poles are generally polygonal cross section in one or more section with or without flange. We are offering transmission poles with fixed type ladder or detachable ladder. It has arrangement for fixing arms/insulators. All transmission poles are hot dip galvanized by seven tank single dip process. All holes are done before galvanization.
...more
Transmission Line Tower
At Utkarsh, we offer our customers a full-range-cum-diverse product basket ranging from 66kV to 765kV Towers (Single Circuit, Double Circuit, Multi Circuit Towers suitable for Twin, Quad and Hex Conductor configurations). Some typical power transmission tower configurations produced by Utkarsh are classified by:- Angular/Tubular/Hybrid Current i.e. AC Line or DVDC line. By phases: single phase line or three phase line By circuit: i) Single circuit – vertical, horizontal & delta configuration towers, ii) Double circuit Line, iii) Multi circuit Lines By Materials: i) Structural Steel in Latticed form, ii) Steel tubular Sections & monopoles, iii) concrete construction. EHT/VHT/UHT – according to the voltage carrying capacity.
...more
Telecom Tower
Utkarsh India Limited, Telecom business vertical offers customers a full range cum diverse product basket ranging from 9 M Roof Top Tower (RTT) to 60 M Ground Based Tower (GBT) (Lattice, Tubular & Hybrid) & up to 180 KMPH, Integrated solutions ranging from design, manufacturing & supply. The Company has powered infrastructure development with our in-house expertise. Telecom towers are steel structures use to mount antenna to catch and transmit the waves. Telecom Towers are classified by:- Angular/Tubular/Hybrid Based on wind speed Narrow based or broad based tower Height of tower Ground based or Roof top Towers Based on mountings Like GSM, WLL, MW ETC.
...more
Swr Pipes And Fittings
Utkarsh manufactures SWR Pipes for Soil & Waste Discharge system including ventilation and rain water system for inside and outside building. Now Utkarsh introduces SWR Fittings & Pipes to ensure but utilization of Utkarsh Pipes. Utkarsh is the one and only manufacturing unit in West Bengal for SWR Fittings and Pipes. Utkarsh SWR Fittings and Pipes are found anytime, everywhere. Utkarsh SWR Drainage systems includes a wide range of Fittings and Pipes which have an equally wide range of applications. Tougher and economical Utkarsh uPVC SWR Fittings and Pipes are the ideal answer for soil, waste and vent lines when compared to Cast Iron and Asbestos Cement Drainage Systems.
...more
swaged pole
IS 2713 Part (I to III):1980 Standards applies to steel tubular swaged poles for street lighting, Power Transmission Line . It covers a range right from 410 SP 01 to 410 SP 80 & 540 SP 01 to 540 SP 80 . Utkarsh have the full production facility for the sizes. Utkarsh India Ltd. have the license to produce IS 2713 Part (I to III):1980 from Bureau of Indian Standards under certification mark no. CM/L – 5100102661 Utkarsh duly marks his pipe by embossing: – “BANSAL “UTKARSH” “ISI LOGO” “IS 1161” “CM/L NO. 5117652”
...more
Substation Structures
Utkarsh India Limited, Substation business vertical offers customers a full range of Substation Structures and integrated solutions ranging from design, manufacturing & supply, in the domestic and international markets. A substation receives electric power from a nearby generating facility and uses a large power transformer to increase or decrees the voltage for transmission to distant locations. A transmission bus is used to distribute electric power to one or more transmission. There are 4 type of Substations and in some cases, can be a combination of two or more types : Step-up Transmission Substation. Step-down Transmission Substation. Distribution Substation. Underground Distribution Substation.
...more
Structural Steel Tube and Pipe
IS 1161 : 2014 Standards applies to steel pipes for Structural purposes. It covers a diameter range right from NB 15 mm to NB 350 mm. Utkarsh have the full production facility for the sizes. This standard is widely used in beams and other structural purposes. Utkarsh India Ltd. have the license to produce IS 1161 : 2014 from Bureau of Indian Standards under certification mark no. CM/L – 5117652 Utkarsh duly marks his pipe by embossing : – “BANSAL “UTKARSH” “ISI LOGO” “IS 1161” “CM/L NO. 5117652”
...more
solar poles
Solar Poles is generally a continuously taper octagonal/Conical cross section generally one section. On top & side of pole it has a bracket to mount the SOLAR PANEL. Used for Airport Lighting, Hospital Area, Security Light, Commercial Lighting, Industrial Lighting purpose etc. UTKARSH Pole has design to withstand wind speed as per IS 875 (P-3) and can be customized up to 300Km/h. All the Solar Poles has Hot Dip Galvanized by single dip seven tank processes. Pole has been designed considering minimum design life of 25 years. All poles have manufactured in modern automatic machinery for better quality. Cutting has been done by CNC PLASMA ensure proper cutting line.
...more
signage mast
Signage Mast is generally used for Advertising. It has one or more polygonal segments. The Signage structure may be movable or fixed type. It has generally two or more face. UTKARSH SIGNAGE has designed in such a way that the impact or wind will be minimum. Special guide has been provided to reduce vibration. For proper balancing of movable ring, balancing screw has been provided.
...more
rural electrification
Utkarsh India Limited, Rural Electrification business vertical offers customers a full range cum diverse product basket ranging from 11 KV to 33 KV Engineering Designs, Drawings, Manufacture, Supply and Installation. The Company has powered infrastructure development with our in-house expertise Rural Electrification steel structures use for the transmission/distribution of 11 /33 KV power. Utkarsh India Ltd. Is providing entire range of hot dip galvanized fabricated steel structures. Having manufacturing facilities at Jangalpur(HWH) & Gurap(Hooghly) with a fabrication and Galvanizing Capacity of 60000 Mt per Annum. Supply single. Double & four poles for 11 Kv to 33 Kv Line Supporting Channels Bracket supporting cross bracings Clamps Steel fabricated accessories for different arrangements
...more
Road Safety Railing Systems
Utkarsh also provides some other Road safety hardware. The welded hollow tubular and solid plate construction is extremely strong features a bolt together design for ease of installation or replacement. It is manufactured from highly durable mild steel and galvanized as per standard to ensure its longevity. Utkarsh have led the way in introducing high visibility safe guardrails & continually developing and exploring new systems to provide increased transparency at lower costs. To ensure the street safety. Utkarsh India limited has developed numerous ornamental guardrail systems working with large client base nationwide. Utkarsh supply various type of pedestrian guardrail as per customer requirements. Some type of pedestrian guard rail dimension as given in below drawing.
...more
road safety barriers
One of the most essential items of road safety is Metal Beam Crash Barriers that are also known as Highway Guardrails. Metal Beam Crash Barrier has proven its dispensability at the most unfortunate times of vehicles. The survey and statistics has shown that these barriers have minimized the gravity of run-off-road accidents. Most of the times, especially on highways, vehicles seldom get off-balance or out of control due to various reasons. During such events, this vital infrastructural product prevents the vehicles by lowering the uncontrollable tendency. Also, it boosts back the shaking confidence of the driver of that errant vehicle and helps him to rebound his vehicle in the continuous normal flow of traffic. The purpose and applicability of efficient Metal Beam Crash Barrier has enhanced its vitality on the roads. Metal Crash Barrier is probably something most of the people don’t think about, that is until it saves their lives. It is a proven road safety system and is brought to you by Utkarsh India which undertakes design. Utkarsh also follow such Road safety standard & norms such as “MORTH” & “AASHTO M180”
...more
PVC Casing Pipes
Utkarsh manufactures uPVC Pipes & Fittings in various International and Indian standards. Utkarsh Steel Pipes, Poles and uPVC pipes are made to conform IS Standards, IS Operating Licences and enlistment with EIL, NTPC, UNICEF, PWD, CPWD, Power Grid Corporation, Indian Railways, PHED, UNICEF, MCC PTA, L&T.
...more
Octagonal Poles
Polygonal Poles is generally a continuously taper octagonal cross section (can be customized for other sided also) having one or more section. On top it has a bracket to mount the luminary. This Pole used for Highway and Road Light, Hotel Entrance, Petrol Pump, Shopping Mall Entrance etc. UTKARSH Pole has design to withstand wind speed as per IS 875 (P-3) and can be customized up to 300Km/h. All the Poles has Hot Dip Galvanized by single dip seven tank process. Pole has been designed considering minimum design life of 25 years. We provide special type internal hinge to prevent theft at site. All poles have manufactured in modern automatic machinery for better quality. Welding has been done by automatic SAW process ensure uniform and proper welding strength.
...more
Lighting High Mast
Mast is a continuously taper polygonal cross section having one or more segment. It’s generally used for Area Lighting Purpose, Mounting National Flag, Signage Board, Stadium Lightning Purpose or other application like chimney etc. It has movable carriage for raising and lowering which is operated with a power tool motor through Winch gear box. It has capping unit comprising with Die cast aluminum Pulley. It is used for large area lighting with the minimum number of obstructions. UTKARSH High mast has design to withstand wind speed as per IS 875 (P-3):2015 and can be customized up to 300Kmph. All the mast has Hot Dip Galvanized by single dip seven tank processes. Mast has been designed considering minimum design life of 25 years.
...more
Hdpe Plb Ducts
Utkarsh Permanently Lubricated HDPE Ducts are made from virgin, UV grade HDPE materials and are used for deployment of Optic Fiber and copper cables. The Ducts are manufactured as per TEC Standards & various International Standards. The Ducts have Superior resistance to natural or mechanical damage. The ducts consist of two concentric layers , the outer layer being HDPE ; co-extruded with an inner layer of solid permanent lubricant (Silicon) to reduce the internal Co-efficient of Friction (ICF).
...more
HDPE Pipes Borewell
Piping made from polyethylene is a cost effective solution for a broad range of piping problems in municipal, industrial, marine, mining, landfill, duct and agricultural applications. It has been tested and proven effective for above ground, surface, buried, floating applications. Polyethylene pipe can carry potable water, wastewater, slurries, chemicals, hazardeous wastes, and compressed gases. In fact, polyethylene pipe has a long and distinguished history of service to the gas, oil, mining and other industries. Polyethylene is strong, extremely tough and very durable. Whether one is looking for long service, trouble-free installation, flexibility, resistance to chemicals or a myriad of other features, polyethylene pipe will meet all the requirements. Polyethylene Pipes are used for piping system in various industries / water supply systems primarily because of its excellent resistance to corrosion, its inherent toughness and ease of installation. Polyethylene pipe is definitely more superior for many applications. The superiority of Polyethylene pipes are especially proven for its following properties
...more
Greyu PVC Pipes
Used for transportation of water in potable water supply systems, rising main and distribution lines, lift irrigation systems, surface irrigation systems, agriculture water supply, industrial process lines, swimming pools etc. Pressure pipes are manufactured as per IS 4985: 2000 standard and are available in 20mm to 315mm sizes in different pressure class. Utkarsh India Ltd. have the license to produce IS 4985:2000 from Bureau of Indian Standards under certification mark no. CM/L-5819583
...more
Erw Steel Tubes
IS 1239 P(I) : 2004 Standard covers the requirement of ERW Steel tubes intended to use for water, non hazardous gases, air and steam. This standard is widely used in domestic & industrial pipe lines, agriculture & irrigation purposes. Utkarsh India Ltd. are licensed to produce IS 1239 P(I) : 2004 from Bureau of Indian Standards under certification mark no. CM/L – 5085766 Utkarsh duly marks its pipes by embossing: – “BANSAL- LIGHT/MEDIUM/HEAVY” “UTKARSH” “ISI LOGO” “IS 1239” “PART – I” & “CM/L NO. 5085766”
...more
Flag Mast
Flag Mast is generally used for Hoisting National flag. It has one or more polygonal segments. The Flag is movable type. UTKARSH FLAG MAST has designed in such a way that the impact or wind will be minimum. Special guide has been provided to Guide the flag.
...more
Electrification Structures Railway
Utkarsh India Limited is an RDSO/CORE PART I approved vendor to manufacture and supply all range of structures, like portals, masts, beams, gantries, small parts steel, sub-station structures and custom/bespoke structures as well. Our versatile range of products offered to our customers are CORE approved such as RSJ Mast, BFB Mast, B Series Mast, TTC Mast, Portal and SPS.
...more
Designer Poles
Designer poles may be polygonal/conical/tubular construction. It has decorative luminary mounting attachment. UTKARSH offering both Hot Dip Galvanized and painted poles to match with the color of luminary.
...more
CPVC Pipe and Fittings
Pipes are manufactured in Copper Tube size [CTS] from ½ “to 2” with two different standard dimensional ratios SDR-11 and SDR-13.5 are made from CPVC compound. Pipe & fittings are produced as per SDR-11 meet the requirement of ASTM D 2846 where as the pipes with SDR-13.5 meet the requirement derived from ASTM F 442, specific to CPVC in Iron Pipe Size (IPS) dimension, which can also be applied to CPVC pipes in CTS dimension. Apart from having the same physical properties, SDR-11 and SDR-13.5 have different wall thickness and therefore, at any given temperature, have different pressure rating.
...more
conical poles
Conical Poles is generally a continuously taper circular cross section having one or more section. On top it has a bracket to mount the luminary. UTKARSH Pole has design to withstand wind speed as per IS 875 (P-3) and can be customized up to 300Km/h. All the poles has Hot Dip Galvanized by single dip seven tank process. Pole has been designed considering minimum design life of 25 years. We provide special type internal hinge on request to prevent theft at site. All poles have manufactured in modern automatic machinery for better quality. Welding has been done by automatic SAW process ensure proper welding strength.
...more
Conveyor belts
IS 9295: 1983 Standards covers steel tubes used for idlers for belt conveyors. This standard widely used in industrial main line. areas. Utkarsh India Ltd. have the license to produce IS 9295: 1983 from Bureau of Indian Standards under certification mark no. CM/L – 5117854 Utkarsh duly marks his pipe by embossing : – “BANSAL “UTKARSH” “ISI LOGO” “IS 9295” “CM/L NO. 5117854” and the OD, Thickness, Length, Grade by stenciling.
...more
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Utkarsh Tubes & Pipes Ltd
Post Free Ad