Water Detector Dealers in Kolkata

The DK’s Membrane Level Sensor is a simple and economical instrument suitable for the minimum and maximum level control inside silos or hoppers that contain non sticky materials, powders or granules like rice, corns, plastics, coffee, sand, lime, etc. A membrane level sensor provides level indication by detecting pressure applied by the bulk material to the sensing membrane. The unit is installed to a vessel wall so that the membrane is exposed to the material to be sensed. As material contacts the membrane, a force is exerted through the diaphragm to a pressure plate within the level sensor. Physical deflection of the pressure plate actuates an internal micro switch for signaling alarms, lights or PLC inputs. When material recedes from the membrane, a light duty spring returns the pressure plate and internal switch back to their original positions. Humidity and temperature variations do not affect working; the membrane is collision and vibration proof.

All type of level gauge, level switch and level transmitters are available as per your requirements. Side moutedtop mounted, cable float level switch, reflex transparent level gauge are available.

• Frequency Response: 40kHz +-2kHz
• Output Frequency: 40kHz
• Resource: Health And Safety Hazards Arising From Floods
• Indicator: LED
• Battery: 9V, 6F22 or equivalent
• Working voltage: AC 220V

We are offering a wide range of Water Leak Detector .

• Type: Liquid Level Sensor
• Material: Metal
• Application: Liquid Levelling
• Weight: 0-300gm
• Color: Metallic
• Frequency: 50Hz

Liquid Level Sensors use a photo-transistor trigger that provides a digital output. These sensors incorporate reverse polarity, over voltage, short circuit and transient protection. We are counted among the top Suppliers of Liquid Level Sensors. We have developed a vast distribution network, due to which, it has become easy for us to deliver retail as well as bulk orders for Liquid Level Sensors within the committed time frame. Details Maximum scan range is 6 m Sealing to IP67 M12 connector, 5 pin Visual indication Four output options; analog (0 Vdc to 10 Vdc and 4 mA to 20 mA) and 2 PNP or 2 NPN switching outputs Synchronizing/hold input Two switch point adjustment via teach-in sequence Temperature compensation Easy installation Not affected by dust, light, and color CE and UL/CSA approved  

SITRANS LG200 is a guided wave radar transmitter for short and medium range level, level/interface, and volume measurement of liquids and solids. It is unaffected by changes in process conditions, high temperatures and pressures, and steam. The various probe are available like Coaxial, rigid, and flexible single or twin rods for many applications.

Automatic pump switch   electronic n gadget is no.1 manufacturer fully automatic water pump controller in kolkata. Install water pump controller and stop overflow in building, home, for all type of pump.   install today & forget overflow, dry run, daily pump on off duty. No.1 rated company in kolkata since 2010. Hurry 45% off, call now install today for best offer in kolkata.   working : when upper tank is empty it will starts the pump automatically and stops the pump when upper tank is full or prior to overflow.and if the reservoir water is empty then this device won't allow the pump to run, means no pump dry run.   this product comes with a larger number of benefits.   call on this number and install today.

Kistler offers both piezoelectric and piezoresistive sensors to measure pressure – so we have the right solution for many applications. Piezoelectric pressure sensors are suitable for measuring highly dynamic, dynamic and quasi-static pressure curves or pulsations. Piezoresistive pressure sensors are suitable for measuring static and quasi-static pressure curves.Piezoelectric Sensors: Model: 601A, 601H, 603B, 6001, 6005, 6031, 7001,7005, 70031 Piezoresistive Sensors:  Model: 4260,4262,4264 & 4080 High Pressure Sensor: Model: 6229A.., 4067…, 6052B. Engine Monitoring: Model: 6013CA, 6313CA, 6302A, 7013C.., 7613C… High Pressure Sensor, Ballistics Model: 6217 Low Pressure Sensor, Engine Development, Inlet/ Outlet Measurement, Model: 4005A, 4043A, 4045A, 4073A, 4075A High pressure sensor, Engine Development, Injection, Model: 4065A, 4067A, 6229A High pressure sensor, Engine Development, Cylinder Pressure, Model: 6052B, 6053BB.., 6057A.., 6115A, 6067c, 7061B

We are offering magnetic float sensor. Function: magnetic float switches / level sensor sare used to detect the senor shave seale dreed switches in a stem with a permanent magnet installed in the float.as float rises or falls, switch is activated/deactivated. power house float sensor uses unique magnetic push at the floating magnet to respond fast to any change of liquid level. features: unique magnetic lift suitable for water/oil or fuel sensing easy installation can be installed directly on pipe specifications: level measurement type :point level switching capacity :10 w/va switching current :0.5 amp.max. Switching voltage :25 v dc max. Material :engineeringplastic cable :2core temperature :-25 to 75ºc

• Highlights: Highly robust tuning fork. Insensitive to build-up. Set-up without filling. Detection of solids in water. Maintenance-free.

OPTISWITCH is a level sensor with tuning fork for level detection. It is designed for industrial use in all areas of process technology and is preferably used for bulk solids. The vibrating element (tuning fork) is energized piezoelectrically and vibrates at its mechanical resonance frequency. The piezos are separated mechanically and are hence not subject to temperature shock limitations.When the vibrating element is immersed in the product, the vibrating frequency changes. This change is detected by the integrated oscillator and converted into a switching command.

• Switching Voltage: 25 V DC max.
• Temperature: -25 to 75ºC

Magnetic float switches level sensor sare used to detect the senor shave seale dreed switches in a stem with a permanent magnet installed in the float.As float rises or falls, switch is activateddeactivated. Power House float sensor uses unique magnetic push at the floating magnet to respond fast to any change of liquid level.

• Accuracy: High
• Part Number: 30B1067
• Brand: ZF
• Feature : Converts Input Mechanical Pressure into Gases and Liquids

Function: Magnetic float switches / level sensor sare used to detect the senor shave seale dreed switches in a stem with a permanent magnet installed in the float.As float rises or falls, switch is activated/deactivated. Power House float sensor uses unique magnetic push at the floating magnet to respond fast to any change of liquid level. Features: ��Unique magnetic lift ��Suitable for water/oil or fuel sensing ��Easy Installation ��Can be installed directly on pipe Specifications: Level Measurement Type :Point Level Switching Capacity :10 W/VA Switching Current :0.5 Amp.max. Switching Voltage :25 V DC max. Material :EngineeringPlastic Cable :2Core Temperature :-25 to 75�ºC

SOIL WATER POTENTIAL SENSORS, Soil Test Kits, SOIL WATER SAMPLER

RTD Sensor, ceramic tube, Compensating Cables, Controller, indicator

Temperature Sensors, Access Control System, Biometric Attendance System

hopper level sensor, Double Curved Impeller, Impeller Industrial Fans

water leakage detector, payroll solution services, Mini GPS, Car Gps System

Level Sensor, Digital Timer, electric counter, Electronic Products