Automobile Gears Dealers in Indraprastha Industrial Area, Kota

They connect intersecting axes and come in several types. The pitch surface of bevel gears is a cone. They are useful when the direction of a shaft's rotation needs to be changed. Using gears of differing numbers of teeth can change the speed of rotation. They are usually mounted on shafts that are 90 degrees apart, but can be designed to work at other angles as well. These gears permit minor adjustment during assembly and allow for some displacement due to deflection under operating loads without concentrating the load on the end of the tooth. For reliable performance, Gears must be pinned to shaft with a dowel or taper pin.

• Upto 20 Module/1.5 D.P. • Outer Diameter Upto 2100mm/80" • Face Widths upto 800 mm/31" • In Single or multi starts • Center Distance from 25mm/1" to 500mm/20" • In Cast Iron, Bronze (PB2S), or as specified • Optionally available Custom made as per Specifications, Drawing or Sample • Worm Gears are available on very tight delivery schedules, some Worm Wheel & Worm shafts Pairs like for Worm Gear Boxes (most of the makes) of C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ready-Stock. Other ratios are also available within One day of placing Order or on short notice (subject to conformation). Gear Box Overhauling and Rebuilding Services.

Agnee manufacture custom precious Gear Rack and Pinion in both Spur and Helical tooth form in steel, stainless steel , cast iron , brass , bronze, plastic, hylam etc. Heat treatment facility is also offered. Continuous length of Gear Racks up to 2500mm are possible. Agnee has a dedicated facility for preicision Gear Rack and Pinion cutting in volume ensuring quality at highly competitive prices.   Specifications of Rack and Pinion gears ·  1.0 Module/ 25 D.P. to 12 Module/2.1 D.P. ·  Face Widths up to 250 mm/9" ·  In Mild Steel, Alloy Steel, Hardened and Tempered Steels , Case carburised,  Case Hardened Steels, Cast    Iron or as specified ·  Custom made as per Specifications, Drawing or Sample ·  Automotive and Industrial use   Required information for quotation :           ·  Material of Construction – eg. Steel.           ·  Teeth Specifications – Module, pitch.            ·  Dimensions: Face Width, Length.              ·  Hardening and tempering required etc.           ·  Holding holes if any, Quantity, Any other requirement

• Output Torque: 10 Nm to 1,450,000 Nm
• Prime Mover :: Electric Motor / Hydraulic Motor

Planetary gear Input Power : 0.25 HP to 300 HP (0.18 Kw to 224 Kw), can be used in various Industrial applications operated by Electric motor and Hydraulic motor.

Gear, Pinions, rack

Worm Gear, Helical Gearboxes, Worm Shaft, Worm Gear Boxes

Gear, break