Industrial Gearboxes Dealers in Indraprastha Industrial Area, Kota

• AGNEE 10 Helical Gear Box: (for 10,000 IN. LBS Pump Jacks)
• AGNEE 16 Helical Gear Box: (for 16,000 IN. LBS Pump Jacks)
• AGNEE 25 Helical Gear Box: (for 25,000 IN. LBS Pump Jacks)
• AGNEE 40 Helical Gear Box: (For 40,000 IN. LBS Pump Jacks)

The Agnee Pump Jack Helical Gearboxes are widely acceptable and are used in pump jacks for oil (petroleum) exploration from the oil wells.   The AGNEE Pump Jack Helical Gearbox is made of Close Grain Cast Iron. They are rugged, corrosion resistant and absorb shock and vibration. The Reducer Gearing is Helical type made from high quality alloy steel, hobbed, case hardened, tempered and surface finish and profile ground to class 10 AGMA quality with a 2.0 Service Factor (Best in the industry).  That leads to a very good efficiency and a quiet working condition. The shafts are from alloy steel forging or heat treated Bars. Bearings are fitted on a ground journal and are taper roller type. These are heavy duty units with superior self oiling systems for extended life in the field. These units have oil level indicators for easier preventive maintenance. The product conforms to the international quality needs.

• Output Torque: 10 Nm to 1,450,000 Nm
• Mounting Type: Flange/ Foot
• Input Speed: 1440 rpm
• Reduction Ratio: 3.6 to 7000:1
• Input Power: 0.25 HP to 300 HP (0.18 Kw to 224 Kw)
• Prime Mover: Electric Motor, Hydraulic Motor
• Input Type: Male Shaft, Hollow Input
• Output Type: Male Shaft, Hollow Input, Spline Shaft

Agnee Gears has developed Planetary Gearbox for various Industrial applications operated by Electric motor & Hydraulic motor. Agnee Gears providing customers with High Quality, Cost Effective, Power saving, Planetary gear box with wide range of power transmissions.\ Principle: Planetary Reduction Gearbox consist of an Internal toothed Ring Gear to which are set 3 Planets mounted on the Planet Carrier engaging also with the Sun Gear (Pinion) and reduced output speed is taken through Planet Carrier and Ring Gear is remain stationary. Output shaft maintaining the same direction of rotation as Input. Material Construction               1)  Graded Cast Iron Housing 2)  High tensile Steel Shafts 3)  High Tensile Alloy Steel Gears 4)  Carbon Steel Planet Carriers Salient Features: High Reduction Ratios, Power Saving, High Efficiency Long Life, Space-Saving Compactness, Higher Overload Capacity, Reliable and Trouble-Free Service, Compact and Co-Axial Sturdy, No-Self Locking Property.

The AGNEE Worm Gearboxes have Cast Iron Gear Case of streamlined design completely air tight, dust proof and capable of being installed in open without any cover. The Worm Shaft is made of Alloy Steel, duly hardened and tempered. The Worm Wheel is made of Chill Cast Phosphorous Bronze and teeth accurately Generated on Gear Hobbing Machines. They are supported on Extra Heavy Duty Taper Roller anti friction Bearings of ample margin of safety to allow adequate journals as well as thrust loads. Lubrication is effected by splash of oil from the sump. Thus, no special care is required except for occasional oil topping to the required level. Air cooling is effected by means of standard polypropylene or metal fans. Please read the Selection of Correct Worm gearbox for choosing the correct one for your application. They are available in: • Vast range of Models suit every individual's requirement • Some Models like C.D. 50, 60, 75, 85, 100 mm, Ratio 30:1 or 40:1 are usually available Ex-stock or on short notice • Center Distances from 40 mm to 400 mm • In Single or Double Stage Reductions • Ratios from 5:1 to 4900:1 • Also made as per customer's specifications, Drawing, requirements • Overhauling of Old Gear Boxes also undertaken, Early delivery schedules • Adaptable Worm Gear Boxes, range from CD 25mm to 85mm Right angle worm gearboxes contain input shafts that are positioned perpendicular to the output shafts. Right angle worm gearbox have up to 98% efficiency levels, and are common in printing presses and glass cutting equipment.

We have h series bevel helical gearboxes and helical gearboxes: agnee h series helical parallel shaft and bevel helical right angle drive industrial gearboxes have been introduced to meet the requirements of today's demanding applications in the medium and heavy-duty sector of the power transmission market. the modular design and construction of the series h offers many engineering and performance benefits including a high degree of interchangeability of parts and sub assemblies. This in turn provides considerable economies of production while maintaining the highest standard of component integrity. apart from standard range, gear boxes are also tailor made to suit individual requirement or as per specifications provided. Please feel free to discuss your requirement and we shall be pleased to make suitable suggestions. product specification: gear tooth geometry design combines maximum efficiency with high load carrying capacity and minimal noise generation. Serviceability of the product was key in the design of the series h range allowing easy maintenance for long life and reliability, which are synonymous with our field reputation. • unit sizes: 80, 90, 100, 112, 125, 140, 160, 180, 200, 225, 250, 280, 315, 355, 400, 450, 500, 560, 630 • transmission ratio: 1.2 - 637 • input power: 0.61 kw to 5,000 kw • torque: up to 117,000 nm the bevel helical gearbox housing is usually made of close grain cast iron. Sometimes housing is also offered in structural steel when the application demands. They are rugged, corrosion resistant and absorb shock and vibration. The helical pinion is made of en 353 case hardening steel, helical gears are made of sae 8620 case hardening steel. The teeth are generated on gear hobbing machine. They are then case carburized, hardened and tempered. Finally, they are surface ground to close tolerances. The teeth flanks are ground on teeth profile grinder. This leads to very good efficiency and a quiet working condition. The output shafts are from alloy steel forging or bars. Low speed shafts can be solid or hollow type. Bearings are fitted on a accurately bored journal and taper roller bearings are used.

AGNEE CRANE DUTY HELICAL GEARBOXES one built on modular concept of construction conformation to is standards with respect to sizes, dimensions. This provides economics mass production, comprehensive maintenance of stocks, favorable delivery period and easy of servicing.Rigid, robust, torsion resistant housing in high quality close grained Grey Cast Iron generously proportioned to ensure proper radiation of any heat generated when Units are operated at their maximum capacity Suitable ribs are placed underneath the bearing seats for strength and the walls are of sufficient thickness to withstand the most severe stresses encountered during operation. On request the housing is manufactured of fabricated construction.